Tender For Addition/Alteration To Swimming Pool At Bhisiana Under Ge (Af) Bhisiana
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Swimming Pool At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster/rough cast plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed. |
| 2 | Material and labour for 15mm thick cement plastering/ rendering in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50kg, finished even and fair complete all as specified and as directed. Note :- WPC shall be measured & paid separately as Supply only under appropriate item of BOQ. |
| 3 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 4 | Material and labour for rough cast plaster on exterior walls in two layers, under layer not less than 10mm cement plaster (1:3) (1 cement: 3 coarse sand ) furrowing the under layer with scratching tool, and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of (1: 1: 1) shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered, complete in all respects and as specified and directed by the Engineer-in-Charge. |
| 5 | Material and labour for complete removal of existing treatment of any type/description (any layer) from external/internal wall/ceiling surfaces, soffits/chajja/roof projection surfaces etc., by scraping steel patti and Mechanical sander/grinder machine, complete all as specified and as directed. |
| 6 | Material and labour for preparation of exterior surfaces of walls/ceiling/soffits etc, applying traditional cement-based putty (white-cement-based polymer-modified powder) (thickness from 1 to 1.5 mm as required for desired smoothness and levelling of surfaces), including gently sand the surface with fine emery paper to make surface smooth and ready for receiving further painting work complete all as specified and as directed. |
| 7 | Material and labour for preparing the surface and applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) to external surface of walls /pillar, Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (over any type of surface new or old prepared after complete removal etc) over and including a coat of exterior alkali resistant water-based primer (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller/brush or airless spray gun complete all as specified and as directed.Brand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Mica Marble of NerolacBrand and Make of primer for external : - Walmasta Exterior Interior Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac / Weather Shield Alkali Bloc of Dulux |
| 8 | Material and labour for preparation of new steel and iron surfaces of any description, not otherwise described, exceeding 10 cm in width or girth, including cleaning the surface free from dust, dirt, grease, oil and other foreign matter and surface imperfections by rubbing down with emery paper/sand paper or by other approved means to obtain a clean, smooth and even surface and further applying one coat of red oxide zinc chromate primer and two coats of first-quality synthetic enamel paint of approved brand, shade and tint, each coat applied by brush only after proper preparation and complete drying of the preceding coat, to produce a smooth, uniform, durable and aesthetically acceptable finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 9 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to matching with the existing, with using paint brush complete all as specified and as directed. |
| 10 | Dismantling iron or mild steel work of any description not otherwise provided for including doors, gates, walkways, railing, framed work, parking shed etc upto 5 mtr height etc, complete all as specified and as directed. |
| 11 | Material and labour for mild steel framed work comprising grills, gratings, drain cover, walkways, railing and other similar works, etc fabricated from angles, tees, square bar, expanded metals or other rolled steel sections, round bars, stiffeners and other connecting plates, conforming to Grade 290.Gde-E-165. The work shall include cutting, bending, notching, coping, drilling, punching, shaping, edge preparation, welding, grinding of welds, fabrication, shop assembly, transportation, erection, alignment and fixing in position with approved holding-down bolts, anchor fasteners, nuts, bolts, washers and all necessary fixing accessories. The item shall include all labour, materials, welding electrodes, gas cutting, scaffolding, staging, lifting arrangements, tools and plant, consumables, safety measures and all incidental works necessary for satisfactory completion of the work at all locations, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 12 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed. |
| 13 | Dismantling of interlocking tile/paver block/brick/chequered tile etc including kerb stone (laid flat or on edge etc) laid dry or pointed complete all as specified and as directed. |
| 14 | Material and labour for PCC (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in coping, mud stops, packing sides/around of interlocking tiles, kerbs & similar work etc at ground and normal height including weatherings, slightly rounded or chamfered angles and including necessary form work as required etc. complete all as specified and as directed. |
| 15 | Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 16 | Supply and laying/fixing 60mm thick factory-made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, conforming to IS 15658:2021, grey cement with pigment, with approved design/size/ shape made by table vibratory method using PU mould, laid as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 30mm thick compacted bed of fine sand and filling the joints with sand, compacting through vibratory compaction by using plate vibrator, finishing and sweeping extra sand complete all as specified and as directed. |
| 17 | Material and labour for Dismantling/taking out old paver block/ interlocking tile of any description and in any position, making surface leveled as per site requirement and refixing/laying the same over and including 30mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand, finishing and sweeping extra sand complete all as specified and as directed. |
| 18 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building/from the site to outside MOD land complete all as specified and as directed. |
| 19 | Preparation of the existing surface inside swimming pool by removing all existing adhesive, loose and deteriorated material, dust, dirt, grinding and scraping wherever required, cleaning the surface thoroughly using a wire brush, pressure water jet or other suitable means, complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Material and labour for 25mm thick PCC in cement mortar (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50kg, the surface finished fair/rough complete all as specified and directed.Note :- WPC shall be measured & paid separately as Supply only under appropriate item of BOQ. |
| 21 | Material and labour for preparation and cleaning of the existing concrete/masonry surface of swimming pool, application of two coats of approved epoxy bonding agent on the prepared surface and further repairing the surface and eliminating surface undulations using 10 mm thick high-strength polymer-modified repair mortar, levelling and finishing the repair mortar to obtain an even and uniform surface, complete all as specified and as directed by the Engineer-in-Charge. Make:- Ref Appendix A to PSNote: (i) The epoxy bonding agent shall be applied in two coats as recommended by the manufacturer. No SBR-based bonding material shall be used. (ii) The repair mortar shall be applied at a nominal thickness of 10 mm or as required to rectify the surface undulations, subject to the manufacturer's recommended application thickness.(iii) All materials shall be compatible with each other and applied strictly in accordance with the manufacturer's technical data sheets. |
| 22 | Material and labour for applying a three-coat system of high-solid, solvent-based polyurethane waterproofing coating over the prepared surface of swimming pool, including application of compatible epoxy primer, providing reinforcement with sealant tape at all corners and junctions, embedding reinforcing fabric over the entire area between the coating layers, and applying the subsequent protective plaster, complete all as specified and as directed by the Engineer-in-Charge.Make:- Ref Appendix A to PS |
| 23 | Material and labour for providing and laying approved first-quality, full-body vitrified/porcelain coloured tiles of approved make and shade, suitable for submerged swimming pool applications, each tile having an area not exceeding 0.04 Sqm (e.g. 100 × 100 mm, 150 × 150 mm, 200 × 200 mm or 247 × 122 mm) and thickness not less than 8 mm, conforming to IS 15622:2017, Group BIa, with water absorption not exceeding 1% and non-slip, textured/gripped finish suitable for wet barefoot areas. Tiles shall be laid on swimming pool floors, vertical walls and internal/external corners in any position, using high-performance, polymer-modified, water-resistant Type 3 tile adhesive conforming to IS 15477:2019 or C2TES1 as per EN 12004, applied with a notched trowel to a minimum bed thickness of 4–5 mm, including full back-buttering of tiles. Tiles shall be fixed with 3 mm spacers or as recommended by the manufacturer. Joints shall be filled with approved-shade, UV-resistant, three-component, high-performance epoxy tile grout conforming to EN 13888 (RG), with anti-fungal resistance tested in accordance with AATCC 30 Part 3, including necessary cutting, edge chamfering/grinding at internal and external angles, surface cleaning, curing, and protection of finished work, complete all as specified and as directed by the Engineer-in-Charge. |
| 24 | Material and labour for providing and laying approved first-quality, scratch-free, stain-free, rectified (straight-edge), full-body vitrified coloured tiles of approved shade, design and make, suitable for external swimming pool areas, having anti-slip (Max-Grip) finish, with individual tile area exceeding 0.11 Sqm but not exceeding 0.18 Sqm (square/rectangular, e.g. 300 × 400 mm or 400 × 400 mm) and thickness not less than 10 mm, conforming to IS 15622:2017, Group BIa, with water absorption not exceeding 1%, anti-slip rating R10 as per DIN 51130 and Class B/C (wet barefoot) as per DIN 51097. Tiles shall be laid on external swimming pool floors in any position, using polymer-modified, water-resistant Type 3 tile adhesive conforming to IS 15477:2019 or C2TES1 as per EN 12004, applied with a notched trowel to a minimum bed thickness of 4–5 mm, including full back-buttering of tiles. Tiles shall be fixed using 3 mm spacers or as recommended by the manufacturer. Joints shall be filled with approved-shade, UV-resistant, three-component, high-performance epoxy tile grout conforming to EN 13888 (RG), with anti-fungal resistance tested in accordance with AATCC 30 Part 3, including necessary cutting, edge chamfering/grinding at internal and external angles, surface cleaning, curing, and protection of finished work, complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Material and labour for providing and laying approved first-quality, scratch-free, stain-free, rectified (straight-edge), heavy-duty full-body vitrified / Extruded Porcelain coloured swimming pool step / coping edge tiles (approved shade, design, and make, having bullnosed/rounded front edge and anti-slip textured/grooved top surface rated DIN 51097 Class C / R11), 16 to 18 mm thick, size 250 mm × 1200 mm or 300 mm × 1200 mm, conforming to IS 15622:2017 (Group BIa) with water absorption not exceeding 0.5%. Tiles shall be laid on swimming pool steps, overflow coping edges, and perimeter surrounds over a levelled cementitious screed/rendering bed and fixed using polymer-modified, water-resistant Type 3 tile adhesive conforming to IS 15477:2019 or C2TES1 as per EN 12004, applied with a notched trowel to a minimum bed thickness of 5–6 mm, including full back-buttering of tiles. Tiles shall be fixed using 3 mm spacers or as recommended by the manufacturer. Joints shall be filled with approved-shade, UV-resistant, three-component, high-performance epoxy tile grout conforming to EN 13888 (RG), with anti-fungal resistance tested in accordance with AATCC 30 Part 3, including all necessary precision cutting, mitring at corners, edge polishing/chamfering, cleaning, curing, and protection of finished work, complete all as specified and as directed by the Engineer-in-Charge.Note: Design, edge profile (bullnose/drop-edge), and colour of tiles shall be prior-approved by the GE. |
| 26 | Supplying and fixing heavy-duty, UV-stabilized virgin ABS (Acrylonitrile Butadiene Styrene) swimming pool overflow channel grating of approved make, colour, and profile, having a minimum thickness/height of 35 mm and width to suit existing overflow gutter channel, modular interlocking single-pin / double-pin design (suitable for straight and curved profiles), featuring a non-slip textured top surface, finger/toe-safe drainage slots, high impact resistance, and complete resistance to UV radiation, pool chlorine, and water-treatment chemicals, cutting/adjusting modular segments as required at corners and junctions, and interlocking/fixing the new grating flush with adjacent coping/deck tiles, including dismantling and removing existing grating, complete all as specified and as directed by the Engineer-in-Charge.Note: Make, design, and sample of the channel grating shall be submitted for prior approval of the GE. |
| 27 | Material and labour for providing and fixing Stainless Steel work (Grade 304) comprising railings, handrails, grills, vertical balusters/posts and similar fabricated works on the top of floor or the sides of waist slab around swimming pool area, manufactured from stainless steel hollow circular, square or rectangular tubes, channels, angles, flats, plates, knobs, cover flanges/caps and other required sections of approved size and thickness. The work shall include cutting, bending, curving, notching, drilling, punching, shaping, welding by TIG/MIG process, grinding, dressing of welds, buffing, all exposed stainless steel surfaces shall have a No. 4 Satin Finish or Mirror Finish, fabrication, shop assembly, transportation and fixing in position with approved stainless steel nuts, bolts, screws, washers, dash fasteners, anchor fasteners, stay holders, guide brackets, base plates, cover plates and all other necessary stainless steel fittings and accessories, complete in all respects, as specified and directed by the Engineer-in-Charge.Notes: (i) Measurement for payment shall be made in Kilograms (kg) based on the actual weight of stainless-steel work fixed in position. |
| 28 | Supplying and fixing in replacement 4-step Swimming Pool Ladder (Skimmer / Standard Deck-Mounted Type) of approved make and design, 500 mm overall width, fabricated from mirror-polished Stainless Steel Grade 304 seamless/ERW tubular pipe of 42 mm outer diameter and minimum 1.5 mm wall thickness conforming to ASTM A554 / IS 6913, complete with 4 Nos. anti-slip embossed/textured stainless steel step treads securely fastened with SS 304 bolts and nuts, securing the ladder firmly in plumb and alignment, including dismantling and removing existing ladder in any type, complete all as specified and as directed by the Engineer-in-Charge.Note: Make, design of the swimming pool ladder (Skimmer type) shall be submitted for prior approval of the GE. |
| 29 | Supplying and fixing in replacement 2-step Swimming Pool Ladder (Skimmer / Standard Deck-Mounted Type) of approved make and design, 500 mm overall width, fabricated from mirror-polished Stainless Steel Grade 304 seamless/ERW tubular pipe of 42 mm outer diameter and minimum 1.5 mm wall thickness conforming to ASTM A554 / IS 6913, complete with 2 Nos. anti-slip embossed/textured stainless steel step treads securely fastened with SS 304 bolts and nuts, securing the ladder firmly in plumb and alignment, including dismantling and removing existing ladder in any type, complete all as specified and as directed by the Engineer-in-Charge.Note: Make, design of the swimming pool ladder (Skimmer type) shall be submitted for prior approval of the GE. |
| 30 | Supply and fixing in replacement heavy-duty swimming pool diving board of approved make and design, measuring 3.00 m length × 0.50 m width, with tapered thickness of 45 mm to 65 mm, manufactured from marine-grade Fibreglass Reinforced Plastic (FRP/GRP), fully encapsulating a seasoned, water-sealed Burma Teak wood core to provide the required spring flexibility and structural strength, suitable for a minimum dynamic user load of 120–150 kg. The top surface shall have an integral non-slip, water-repellent textured tread, conforming to DIN 51097 Class C for wet barefoot slip resistance, and shall be finished with high-build, UV-stabilised, weather- and chlorine-resistant gelcoat to resist yellowing, chalking and delamination while retaining flexural properties. The work shall include supply and fixing of a complete stainless steel fulcrum assembly comprising adjustable fulcrum roller/bar with shock-absorbing EPDM rubber cushion pads, rear mounting hinge/bracket and deck support stand, compatible with the existing deck arrangement and the manufacturer's design. The assembly shall be secured with AISI 304 stainless steel countersunk bolts, nuts, washers and heavy-duty stainless steel deck anchor fasteners suitable for outdoor and wet conditions. The work shall also include careful dismantling and removal of the existing damaged diving board and worn fulcrum fittings, checking and preparation of the existing deck mounting base, installation, alignment and levelling of the new diving board and fulcrum assembly in accordance with the manufacturer's instructions, and making good any damage caused during execution, complete all as specified and as directed by the Engineer-in-Charge.Note: The make, model, technical data sheet and sample of the diving board and fulcrum assembly shall be submitted for prior approval of the GE. |
| 31 | Net CONTRACT SUM will be worked out in General Summary after deduction of ‘CREDIT SCHEDULE’ amount inserted by MES. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender