Tender For Dnit For The Work Of 3 Nos. Simple Toilets To Convert Handicapped Toilets, At Least 3 Buildings In Existing Model Jail Sector-51, Chandigarh.
Tender Value
1.99 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
3995
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For The Work Of 3 Nos. Simple Toilets To Convert Handicapped Toilets, At Least 3 Buildings In Existing Model Jail Sector-51, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. .2.8 |
| 2 | All kinds of soil .2.8.1 |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10 |
| 4 | All kinds of soil .2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia .2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. butnot exceeding 300 mm dia .2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10 |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3 |
| 11 | W.C. pan with ISI marked white solid plastic seat and lid .17.3.1 |
| 12 | Providing and fixing wash basin with C.I. brackets, without pillar taps ,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require DSR 17.7 .17.7 |
| 13 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 .17.7.3 |
| 14 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 15 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 16 | Flexible pipe .17.28.2 |
| 17 | 32 mm dia .17.28.2.1 |
| 18 | Providing and fixing soil, waste and vent pipes : .17.35 |
| 19 | 100 mm dia .17.35.1 |
| 20 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2 |
| 21 | 75 mm diameter : .17.35.2 |
| 22 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 .17.35.2.2 |
| 23 | Providing and fixing heel rest sanitary bend .17.40 |
| 24 | 100 mm dia .17.40.1 |
| 25 | Sand cast iron S&S as per IS - 3989 .17.40.1.2 |
| 26 | Providing and fixing collar : .17.57 |
| 27 | 100 mm .17.57.1 |
| 28 | Sand cast iron S&S as per IS - 3989 .17.57.1.2 |
| 29 | 75 mm .17.57.2 |
| 30 | Sand cast iron S&S as per IS - 3989 .17.57.2.2 |
| 31 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58 |
| 32 | 100 mm .17.58.1 |
| 33 | 75 mm .17.58.2 |
| 34 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60 |
| 35 | 100 mm inlet and 75 mm outlet .17.60.2 |
| 36 | Sand cast iron S&S as per IS - 3989 .17.60.2.1 |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall .18.10 |
| 38 | 20 mm dia nominal bore .18.10.2 |
| 39 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : .18.11 |
| 40 | 15 mm dia nominal bore .18.11.1 |
| 41 | 20 mm dia nominal bore .18.11.2 |
| 42 | Providing and fixing of gate valve valve complete in all respect .18.17 |
| 43 | 20mm dia .18.17.1A |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 45 | 45 cm length .18.21.2 |
| 46 | 15 mm nominal bore .18.21.2.1 |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 48 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49 |
| 49 | 15 mm nominal bore .18.49.1 |
| 50 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53 |
| 51 | 15mm nominal bore .18.53.1 |
| 52 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4 |
| 53 | 100x100 mm size P type .19.4.1 |
| 54 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1 |
| 55 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: .19.30 |
| 56 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : .19.30.3 |
| 57 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.30.3.1 |
| 58 | Providing and fixing of gate valve valve complete in all respect .NSR |
| 59 | 15 mm dia . |
| 60 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. .NSR |
| 61 | 15 mm nominal bore . |
| 62 | Providing and fixing of C.P grating of approved make .NSR |
| 63 | Providing and fixing of CP pillar tap with foam flow 15 m complete in all respect. .NSR |
| 64 | Providing and fixing of CP/SS Long Bend for OWC .NSR |
| 65 | Converson of OWC/Indian W.C to EWC P/S trap complete including dismentling of OWC dismentling 4\\"HCI P trap fixing of CI bend PVC collor drip seal joint 4\\" pvc pipe1'-6\\" average 6 kg pressure repair of dismentl floor fixing of surface W.C all special pipe lead hamp yarn cement sand bajri etc and inclusive of carrige & all tax .NSR |
| 66 | Providing and fixing of stainless steel grab rail 32 mm dia in handicape toilet as per approved by EIC. .NSR |
| 67 | Construction of Curb with C.C. 1:2:4 alongwith upto 1'-0\\" depth to make it water proof including Cost of sand, bajri. .NSR |
| 68 | Providing and fixing of Sky Box Shower seat by Highware Italian Collection .NSR |
| 69 | Providing and fixing of Hand Shower with 1.5 m Shower tube & Hook Model F160202CP .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender