Housing Urban and Rular Development Government Departments Closing in 10 days TDR #58571439

Tender For Improvement Of Badasankha Tarini Nandika Road From 30/975 Km To 32/000 Km

Issued by Government Departments · Ganjam, Odisha
Tender Value
2.20 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Improvement Of Badasankha Tarini Nandika Road From 30/975 Km To 32/000 Km

BOQ

Name of Work:- Improvement of Badasankha Tarini Nandika road from 30/975 KM to 32/000 km
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm , removal of stumps of trees cut earlier and disposal of unserviceable material and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm in thickness as per clause 201 of MORTH&H specifications for Road and Bridge works including cost of all labour, T&P etc. required for the work etc. complete as per direction of the Engineer-in-charge.
2Excavation for roadwork in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment and as per MoRT&H Specifications etc complete
3Construction of granular Sub-base by providing Granular sub-base Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(5th. Revision) .
4Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision).
5Providing Primer Coat with bitumen emulsion (SS) on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means as per Technical Specifications and Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision). & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
6Providing Tack coat with bitumen emulsion (RS) on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
7Providing Dence graded Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501 and 505 of MoRT&H Specifications for Road & Bridge works (5th Revision).
8Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision).
9Construction of embankment with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per Clause 305 of MoRT&H Specifications dfor Road & Bridge works(5th. Revision) complet including cost,conveyance,Royalities,Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge.
10Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface,including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both direction ,pressed into surface when the temperature of surfaces is not less than 100° C ,protruding 1 mm to 4 mm over mastic surface, all complete as per Clause 515 of MoRT&H Specifications for Road & Bridge works (5th Revision).
11Providing road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250gms per sqm area , thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes etc. for finished item of work as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 803 of MoRT&H specification for road and bridge work (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
12Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type-IV recto reflective sheeting fixed over 2mm thick alumunium sheeting , 3mm/4mm thick alumunium composite material sheet depending on the size of sign vide Clause No. 801.3 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) fixed over back support frame of min 25x25x3 mm angle mounted on a mild steel cicular pipe 65 NB, 3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45cmx45cm x 60 cm, 60cm below ground level as per approved drawing including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. The sign shall be maintained as per Section 12 of IRC-67Facility Information signs (800x600 mm)
13Route Marker Sign(45cm x 60cm)
14Cautionary signs triangular 900mm side
1560cm size Circular
1690cm high octagon
17Providing and fixing of 150 cm long ordinary 5 Km. Stone for N.H., S.H., M.D.R. of pre-cast R.C.C. (1:2:4) kilometre stone as per I.R.C. design including finished smooth,cost & conveyance of all materials, labour etc complete and as per direction of Engineer-in-Charge
18Reinforced cement concrete M-15 grade hectometre stone of standard design as per IRC:8-1980 fixing in position including painting & printing etc as per Clause - 805 of MoRT&H Specifications for Road & Bridge works (5th Revision).
19Gravel backing to revetments as per approved Drawing & Technical Specifications and Section 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) with cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
20Rough stone dry masonry in guard wall / retaining wall using hard granite stone of above 003 cum including cost, conveyance & royality of all materials and labour charges etc. complete as per direction of Engineer-In-Charge.
21Providing sand filling in foundation trenches as per drawing and technical specificatiion including cost of all materials, labour, T&P etc. complete as per direction of the Engineer-in-charge.
22P.C.C.M-15 Grade in levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base
23P.C.C.M-15 Grade in foundation and substructure using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base
24P.C.C.M-15 Grade in substructure using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base
25Rough stone dry masonry with sand grouted for the walls with hard stones as per approved Drawing & Technical Specifications and as per Section -1400 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.
26RCC M-25 grade in Foundation with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
27RCC M-25 grade in Sub-structure with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
28RCC M-25 grade in Super-structure with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
29Supplying cutting, bending, binding & straightening coiled or bent up HYSD Bar of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary , hoisting, lowering, laying including cost, conveyances of HYSD Bar and binding wires of 18 to 20 gauge and labour required for the work for bending, binding with labour cess etc. (payment will be made on standard weight of B.I.S. for HYSD Bar only) etc. complete as per OPWD specification & direction of Engineer-in-charge
30RCC M-30 grade in wearing coat including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section -1600, 1700 & 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
31Metal spall backing to weep holes of abutments, deep drain with HB stone aggregates of 50mm size including cost, conveyance, royality & other taxes of materialF, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
32Back filling behind abutment wing walls & return wall using sand complete as per approved drawing & technical Specifications and as per Section 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
33Rough stone dry packing on Aprons and Revetments with hard granite stone of above.003 cum including cost, conveyance royality of all materials and labour charges etc.complete as per direction of Engineer-In-Charge.
34Providing Weep Holes of 100mm dia using A.C./ PVC pipe including fixing with cement mortar as per approved Drawing & Technical Specifications and Clause -2706 of MoRT&H Specifications for Road & Bridge works (5th Revision).
35Painting on concrete surface with two coats of water bound cement paint to unplaster concrete surface of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
36Grouting aprons and revetments of 23cm deep with cement concrete (1:4:8) using 2.5cm size hard crusher broken coarse aggregates as per approved Drawing & Technical Specifications for finished item of work including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
37Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres including cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
38Dismantling Precasted / Reinforcement cement concrete of grade M-20 and above including T&P and scaffolding wherever necessary, sorting the dismantled materials disposal of unserviceable materials and stacking the serviceable materials with all lifts and lead of 1000m etc.complete as per Clause -202 of MoRT&H Specifications for Road & Bridge works (5th Revision).
39Removing of Hume pipes of above 900mm dia and stacking within a lead of 1000m etc.complete as per Clause -202 of MoRT&H Specifications for Road & Bridge works (5th Revision).
40RCC M-20 grade in Foundation of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
41RCC M-20 grade in Sub-structure of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th
42RCC M-20 grade in Super-structure of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
43Painting with two coats of synthetic enamel paint to unplaster concrete surface of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
44Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58571439
AUTHORITY Government Departments
TENDER VALUE 2.20 Crore
LAST DATE 02-12-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Improvement Of Badasankha Tarini Nandika Road From 30/975 Km To 32/000 Km
Basic Detail
Tender No CCE SC RandB BAM-10/2026-27
Bidding Type Tender
Location
City Ganjam
State Odisha
Key Dates
Publish Date 17 Nov 2026
Submission Date 02 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 2.20 Crore
Tender Fee 10000
EMD 2.20 Lakhs
Exemption Available
Document List
bc3b6d0a-2163-4d19-b830-90a478cea5ca.html
BOQ_621782.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

bc3b6d0a-2163-4d19-b830-90a478cea5ca.html

xls

BOQ_621782.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender