Tender For Improvement Such As Widening And Strengthening Of Kurla Khaspa Road (Odr) From 0/000 Km To 1/401 Km In The District Of Ganjam Under State Plan For The Year 2026-27
Tender Value
4.19 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
4.19 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Such As Widening And Strengthening Of Kurla Khaspa Road (Odr) From 0/000 Km To 1/401 Km In The District Of Ganjam Under State Plan For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm , removal of stumps of trees cut earlier and disposal of unserviceable material and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm in thickness as per clause 201 of MORTH&H specifications for Road and Bridge works including cost of all labour, T&P etc. required for the work etc. complete as per direction of the Engineer-in-charge. |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment and as per MoRT&H Specifications etc complete |
| 3 | Loosening, leveling and Compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, compacted at OMC to achieve minimum dry density conforming to Table 300-2 as per Technical Specifications and Clause - 305.3.4 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 4 | Construction of embankment with approved materials deposited at site from roadway cutting and foundation excavation of CD & structures graded and compacted to meet requirement of table 300-2 as per approved Drawing & Technical Specifications and Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 5 | Construction of embankment with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per Clause 305 of MoRT&H Specifications dfor Road & Bridge works(5th. Revision) complet including cost,conveyance,Royalities,Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge. |
| 6 | Turfing the slopes of embankment with compact turf grass as per approved Drawing & Technical Specifications and Clause - 307 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 7 | Construction of granular Sub-base by providing Granular sub-base Grading-VI material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(5th. Revision) . |
| 8 | Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 9 | Providing Primer Coat with bitumen emulsion (SS) on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means as per Technical Specifications and Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision). & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 10 | Providing Tack coat with bitumen emulsion (RS) on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 11 | Providing Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision).) |
| 12 | Providing & laying Semi Dence Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 13 | Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface,including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both direction ,pressed into surface when the temperature of surfaces is not less than 100° C ,protruding 1 mm to 4 mm over mastic surface, all complete as per Clause 515 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 14 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018 including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 15 | Providing road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250gms per sqm area , thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes etc. for finished item of work as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 803 of MoRT&H specification for road and bridge work (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 16 | Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 17 | Providing and fixing of bi-directional retro reflective raised pavement markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all materials, labour, transportation, taxes, duties, sundries, T&P etc. complete. |
| 18 | Supplying and installation of (Delineators) Road way indicatorconforming to IRC:79 including cost of all materials, labour, transportation, taxes, duties, sundries, T&P etc. complete. |
| 19 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-B Type-IV recto reflective sheeting fixed over 2mm thick alumunium sheeting , 3mm/4mm thick alumunium composite material sheet depending on the size of sign vide Clause No. 801.3 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) fixed over back support frame of min 25x25x3 mm angle mounted on a mild steel cicular pipe 65 NB, 3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45cmx45cm x 60 cm, 60cm below ground level as per approved drawing including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. The sign shall be maintained as per Section 12 of IRC-67Facility Information signs (800x600 mm) |
| 20 | Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 mm x 35 mm x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge. |
| 21 | Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 mm x 40 mm x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB,3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge.(a) 1800mmx1200mm size board. |
| 22 | Route Marker Sign(45cm x 60cm) |
| 23 | Cautionary signs triangular 900mm side |
| 24 | 60cm size Circular |
| 25 | Earth work in excavation of foundation of structures with disposal upto 1000m as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. by Mechanical Means (Depth upto 3 m) |
| 26 | Providing sand filling in foundation trenches as per drawing and technical specificatiion including cost of all materials, labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 27 | P.C.C.M-15 Grade in levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base |
| 28 | P.C.C.M-15 Grade in foundation and substructure using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base |
| 29 | P.C.C.M-20 Grade in foundation bed using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). - Base |
| 30 | RCC M-20 grade in Foundation of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 31 | RCC M-20 grade in Sub-structure of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th |
| 32 | RCC M-20 grade in Super-structure of RCC drain with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 33 | Supplying cutting, bending, binding & straightening coiled or bent up HYSD Bar of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary , hoisting, lowering, laying including cost, conveyances of HYSD Bar and binding wires of 18 to 20 gauge and labour required for the work for bending, binding with labour cess etc. (payment will be made on standard weight of B.I.S. for HYSD Bar only) etc. complete as per OPWD specification & direction of Engineer-in-charge |
| 34 | Filling in foundation and plinth with excavated earth including watering and ramming as per OPWD Specification and direction of the Engineer-In-Charge. |
| 35 | Providing Weep Holes of 100mm dia using A.C./ PVC pipe including fixing with cement mortar as per approved Drawing & Technical Specifications and Clause -2706 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 36 | Metal spall backing to weep holes of abutments, deep drain with HB stone aggregates of 50mm size including cost, conveyance, royality & other taxes of materialF, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 37 | RCC M-25 grade in Foundation and Sub-structure with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 38 | RCC M-25 grade in Super-structure with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 39 | Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres including cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 40 | Removing of Hume pipes of above 600mm to 900mm dia and stacking within a lead of 1000m etc.complete as per Clause -202 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 41 | Supplying , Laying & Fixing NP4 RCC hume pipe in position for culvert including pointing ends , fixing collars with cement mortar (1:2) including cost conveyance and taxes of hume pipe etc complete.1000mm dia HPC |
| 42 | Gravel backing to revetments as per approved Drawing & Technical Specifications and Section 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) with cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 43 | Rough stone dry packing on Aprons and Revetments with hard granite stone of above.003 cum including cost, conveyance royality of all materials and labour charges etc.complete as per direction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender