Tender For Upgradation And Modernization Of Electrical Control System For Surge Shaft And Draft Tube Gantry Systems
Tender Overview
Project Description
Tender for Upgradation And Modernization Of Electrical Control System For Surge Shaft And Draft Tube Gantry Systems
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Nov-2026 | General Corrigendum No. 02 Dated 17.11.2026 | Other | 08-Dec-2026 |
| 2 | 17-Nov-2026 | General Corrigendum No. 01 Dated 17.11.2026 | Other | 08-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SITC AND REPLACEMENT OF DT GATE GANTRY CRANE MAIN CONTROL PANEL AND ASSOCIATED ELECTRICAL SYSTEM 1. DT Gate Gantry Crane – Main Control Panel (01 No.)SITC of a new main control panel for 01 No. DT Gate Gantry Crane, including complete replacement of the existing control panel, electrical components, control circuits and associated wiring for the operation of gate UP/DOWN movement and crane long-travel movement. 2. Surge Shaft – Fixed Wheel Gantry Cranes (03 Nos.)SITC of new main control panels for 03 Nos. Fixed Wheel Gantry Cranes installed at Surge Shaft, including complete replacement of the existing control panels. (For further details, refer Annexure-C (Scope of Work) in SBD) |
| 2 | SITC of wire cable for gantry crane 4 core copper coated 8mm diameter 150m length.SITC of wire cable for gantry crane 4 core, 35 sq. mm, Copper cable flexible length 150 m. The job includes replacement of 150 metres Old trailing cable with new flexible trailing cable along with replacement of roller assemblies and accessories like thimbles, nuts& bolts with washer etc.1. Specification of the cable1.1 size of cable shall be 35 sq.mm,1.2 4 Core copper coated1.3 Reputed Make like POLYCAB/HAVELLS or any other superior make.The material shall comply to IS: 3938-1983 (or latest)-Indian Standardspecification for Electric wire rope hoists (SG). |
| 3 | SITC of distance/proximity sensor by way of mounting the sensors on hoist rope drum or on the lifting beam wherever feasible as to measure the exact movement when the lifting beam touches the gate during the operation of DT gates and surge shaft. Installation of HMI, PLC based control panel of reputed make for exact measurement of gate travelling in meters for up & down movement with help of gear boxes and encoder system along with complete wiring on existing system. These sensors to be mounted on the hoist drums / lifting beam as to accurately shows the position of the lifting beams with respect to the gantry crane, the installation is such that it will move in coordination with the rope of the hoist drum. The job also includes the installation of sensors and display size 2feet*4feet in such a position, so that underwater distance can also be measured during the up & down movement of DT gates and Surge shaft gates without getting affected by the turbulence/water motion of the water. The distance measured should be displayed on the screen of at least 2ft x 4ft on the both sides of the girders of the crane. The system shall be capable of continous operation during Varying conditions occurring throughout the year to which a crane is exposed normally in service. The range of climatic conditions 30°C to -5°C throughout the year and with moisture conditions thought the year. Vendor has to submit two copies of connection diagrams of receiver, interface panel/ junction box and crane control panel. |
| 4 | Supply, Installation, testing and Commissioning of Load Display SystemSupply, Instalation, Testing and Commissioning of complete upgraded microprocessor controlled safety system for DT GATE GANTRY CRANE,03No surge shaft gate i.e. Load Cell. The upgraded system shall be compatible to the existing system fitted on the crane functionaly as well as physically. Display unit of about 2ftx2ft is to be installed on the both sides of the girder of gantry crane which continuously shows load while in operations & shall provide indications in case of excessive loads. Load cell shall be attach to the wire ropes and Individual display for both the hooks will be installed on both sides of gantry crane girders and also hooter system shall be installed in case of overload, hooter will automaticaly give the indication. The system shall have a \\"Self-testing feature\\" upon power turn-on and continue to test itself repeatedly and unobtrusively during normal operation and warn the user in advance during the case of malfunction. Further, in case of malfunction. the facility of \\"Error Code Display\\" with adequate information on service manual to trace down a fault of the sensor, Printed circuit board (PCB) and further fault in that unit shall also to be provided. The system shall be capable of continuous operation during varying conditions occurring throughout the year to which a crane is exposed normally in service. The range of climatic conditions l0°C to 5°C throughout the year and with moisture during the rainy season. Specification covers scope of supply of the following items in complete set of or in part with accessoies of the upgraded System Central Microprocessor Unit, Control Console, Load Sensor User friendly Display unit LED Suitable for working in day and Nightlight. Vendor has to submit two copies of Connection diagrams of receiver, interface panel/ junction box and crane control panel. |
| 5 | Supply. Instalation, Testing and Commissioning of Wireless Radio Remote (RRC)control system.Scope of radio remote controlThe job includes supply and installation of Radio Remote Control system suitableto operate Gantry crane.The scope of supply shall consist of Radio Remote Control.1 no. Transmitter- Joy sticks type or Push button type.1 no. Receiver.1 no. Antenna and cable.Two sets of Ni-Ah rechargeable batteries. 1no. Battery Charger (suitable tocharge one set of batteries at a time).The remote control Units shall have following fealures for following motion:(i) MAIN POWER(ü) MAN HOIST(üi) LONG TRAVEL(iv) EMERGENCY STOPON / OFFONE SETONE SETON / OFF CONTROLSITC of Radio Remote Control system suitable to operate Gantry crane by way of Wireless Complete RRC transmitter with battery, receiver, interface pnel/ junction box, selector switch, cables for connection between recever, panel/junction box and crane control panels. The vendor shall consider inaltle ritfeamces whether or not specificaly mentioned for successful completion of supply. installation and commissioning of RRC system in crane. Installation of RRC recever. selector switch and interface panel/ junction box on crane and laying and teminafion of cable between RRC receiver, interface panel/ junction bOx and crane control panels. Vendor shall consider lump Sum quantity for length of cable to be supplied for connections, |
| 6 | SITC OF wired tunnel Emergency telephone dail communication system without an external network operates entirely on a closed, local network install at surge shaft 1000mtr. Using a physical-wire foundation ensures zero reliance on cellular, satellite, or internet connections, keeping underground personnel linked via secure voice and data TRANSFER even in harsh, enclosed environments. 04 NO OF TELEPHONY & INTERCOMS located at surge shaft and collection gallery WITH transmit cable 10 pairs armored high grade copper conductors for optimal signal transmission also with 04 no. telephone ringers. telephone copper cable wire diameter 0.6mm length 1000 mtrs , frequency Range 50-60HZ opertaing voltage 220vac. A central switch connected to a physical fiber optic backbone runs to rugged, wall-mounted SOS phones and intercoms. |
| 7 | SITC OF 03 NO POWER ON/OFF Breaker 3-phase power supply with protection system 100Amp MCCB 3 pole cricuit breaker protection, push button ON/OFF, with copper cable 35sqmm 50 mtrs and change over reputed make as per Requriments of Cranes |
| 8 | Alignment/Repair of the gantry track and lifting beam with hook adjustment.Alignment/repair of gantry track and lifting beam with hook adujastment by way of removal of old damaged part of track by way of dismantling of old rails 60mtrs and installation of new track wherever required by way of grouting and welding of new track with existing track.The job also includes alignment of new rails wherever required including welding of all rail joints, replacing the damaged clamp bolts,rail joints existing concrete.The alignment of the rails has to be done in accordance with the existing rails and the span, rail levels and alignment rails shall not exceed as per standard tolerances.Packing should be provided where it required and also application of epoxy mortar system of ASTMC-881 on old concrete and laser alignment of complete track. The material shall comply to IS: 800-2007 (or latest)- Indian Standardcode of practice for General Construction in steel. |
| 9 | SITC of DC/EM Brake 03 Nos at surge shaft Gantry Crane 300dia. Torque-400Nm make cryotron Magna Drive. |
| 10 | Remote Monitoring Module for Panels Located Approximately 600 m Distance from the Main Control Panel Supply of gantry Crane , installation, testing, and commissioning of a remote monitoring system for panels located approximately 600 meters from the main control panel, including the following:PLC Panel at each starter panel – 03 Nos.Armoured Optical Fiber Cable (OFC) – 600 metersRemote Monitoring Module complete with 11-inch HMI Touchscreen moisture resistant – 01 Set & Gate position indicator.The system shall enable real-time monitoring and communication between the remote starter panels and the main control panel through the OFC network. |
| 11 | SITC of 3-Phase induction motor for Hoist motor 22kw /30HP 975 Revolution/minute,6 pole,Frame-200L S1 duty,class of insulation-F squirrel cage motor.make bharat bijli, cropmton equivalent. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 17 daysCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 17 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender