Public Administrative Department Local Bodies Closing in 29 days TDR #58570800

Tender For Inviting Rates Of Materials For Routine, General, Ordinary, Repair Work For The Finacial Year 2026-27 At Nagar Palika Parisad Mandal Dist. Mandal (M.P)

Issued by Local Bodies · Mandla, Madhya Pradesh
Tender Value
20 Lakhs
Estimated cost
Bid Submission
18 Dec 2026
29 days left
EMD
20000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mandla → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Inviting Rates Of Materials For Routine, General, Ordinary, Repair Work For The Finacial Year 2026-27 At Nagar Palika Parisad Mandal Dist. Mandal (M.P) , Inviting Rates Of Materials For Routine, General, Ordinary, Repair Work For The Finacial Year 2026-27 At Nagar Palika Parisad Mandal Dist. Mandal (M.P) , 6.6 Providing And Laying Cement Concrete Grade M-20 (Nominal Mix 1:1.5:3)With 20 Mm Graded Crushed Stone Aggregate, Mixing Shall Be In Mechanical Mixer, Laying With Paver Compacting By Use Of Pin, Plate /Screed Vibrators Including Form Work By Strong Steel Girders Fixed By Spikes, Separation Membrane 125 Micron Thick, I/C Cutting Of Joints @ 4 To 5 M Interval & Filling It With Hot Applied Bituminous Sealant (Without Dowelbars). (Max. Thickness 20Cm)Cum 5420.006.7 Deduct From Item No.6.2, 6.3 And 6.6 Above If Paver With Electronic Sensoris Not Used And Laying, Compaction Is Done By Any Other Method(Note :- The Acceptance Criteria Regarding Level, Thickness, Surface Regularity, Texture Finish, Strength Of Concrete And All Other Quality Control Measures Shall Be The Same As In Case Of Machine Laid Work.) This Item Is To Be Executed With Prior Written Permission Of Engineerin-Charge , 1Pcc M-15 In Foundationplain Cement Concrete M-15 Mix With Crushed Stone Aggregate 40 Mm Nominal Size Mechanically Mixed, Placed In Foundation And Compacted By Vibration Including Curing For 14 Days. As Per Mort&H Specification 409. , Providing And Placing In Position Factory-Made Precast Cement Ncretebox-Culvert As Per Design And Shape, Using Coarse Aggregate And Fineaggregate Derived From Natural Sources, Ordinary Portland/ Admixtures Asper Design Mix Is: 456-2000 And Standard Like Indian Standardinternational Standard Viz. Japaness Industrial Standard (Jis) /Us Standard/Eu Standard Having Of Strength Not Less Than M-50, Using Hermomechanically Treated Bars,(Tmt/Tmx) Fe 500D Or More Conforming Tois 1786 Reinforcement Bar And Capable Of Carrying A Wheel Load Of 32.5 Tones With Earth Cushion 0.20 M To 0.50 M For Heavy Vehicle Movement.Rate Includes All Cost Of Material, Labor Charges At The Plant, Cost Ofreinforcement, Formwork And Lifting Accessories, And Transportation Up To Work At The Site. Making Necessary Holes Of Required Sizes For Carryingthrough Service Lines Etc. Providing Steel Hooks For Lifting Etc. The Work Tobe Executed As Per The Direction Of Engineer In-Charge.N-Charge.(I) Box Culvert Size 500X500 Mm Th 120Mm , (Iii) Box Culvert Size 800X800 Mm Th 120 Mm , 16.5 Providing And Applying (10Mm Thick Average) Epoxy Mortar (Includingprimer & Seal Coat) Over Leached, Honey Combed And Spalled Concretesurface And Exposed Steel Reinforcement Complete As Per Technical Specification , 16.6 Patching Of Damaged Concrete Surface, (25Mm Thick Average) With Polymer Modified Cementitious Mortar To Be Applied As Per Instructions Ofmanufacturer And As Approved By The Engineer. , 9.1 Supply Of Mineral Aggregate Like Broken Stone/Crushed Stone /Stone Dust/ Moorum At Road Site Including All Lead And Stacking Etc. Complete. E 22.4Mm Standard Size Crushed Stone , C 40Mm Standard Size Crushed Stone , G 11.2Mm Standard Size Crushed Stone , I Crusher Stone Dust , J Moorum With Cbr Not Less Than 7 , 2.6 Earth Work In Excavation For Foundation, Trenches For Pipes / Cables Or Drains Etc. By Mechanical Means /Manual Means (Exceeding 30Cm In Depth.) Includingramming Of Bottom, Dressing Of Sides, Disposal Of Excavated Earth Including Of All Lift And Lead Upto 50M. Disposed Earth To Be Levelled And Neatly Dressed. 2.6.1 All Kinds Of Soil , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level.6 Cement Concrete Grade M-10 (Nominal Mix) With 40 Mm Maximum Size Of Stone Aggregate , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level.4.1.2 Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximum Size Of Stone Aggregate , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximum Size Of Stone Aggregate , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels,Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floortwo Level Excluding The Cost Of Entering, Shuttering And Reinforcementwith Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximumsize Of Stone Aggregate. , Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding Upto Floor Level Including Cost Of Binding Wire, Wastage And Over Laps Upto 12Mm Horizontal/ Inclined Position Of Reinforcement Bars In Slab And Beams, Plinth, Chajjas,Lintels, Upto 4.5M Vertical Length Of Reinforcement In Wall Columns (Over Laps Shall Be Provided As Per Requirement Of Is : 13920; Is 456 & Sp : 34) Etc. Complete.5.11.4 Thermo-Mechanically Treated Bars. (Fe 500 D Or More) , 6.13 Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894- 2002, Class Designation 50 (Average Compressive Strength) Upto Plinth Level : 6.13.2 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 6.14 Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894- 2002, Class Designation 50 (Average Compressive Strength) Insuperstructure Above Plinth Level Up To Floor 2 Level Including The Cost Of Scaffolding : 6.14.2 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 6.15 Half Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894-2002, Class Designation 50 ( Average Compressive Strength) In Superstructure Above Plinth Level Up To Floor 2 Level Including The Cost Of Scaffolding :6.15.2 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 7.1 Random Rubble Masonry With Hard Stone In Foundation And Plinth With Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 9.114 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Section Having An Overall Dimension As Below (Tolerance ±1Mm) With Wall Thickness 2.0Mm ± 0.2Mm, Corners Of The Door Frame To Be Mitred And Welded Of Plastic, Galvanized Brackets And Stainless Steel Screws. The Hinge Sidevertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19Mm And 1Mm ± 0.1Mm Wall Thickness And 3 Nos. Stainlesssteel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge9.114.1 Extruded Section Profile Size 48X40 Mm. , 9.115.1 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm ± 0.2 Mm With Inbuilt Edging On Both Sides.The Styles And Rails Mitred And Joined At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0Mm And Stainless Steel Screws.The Styles Of The Shutte Rreinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm ± 0.1 Mm Wall Thickness.The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm ± 0.2 Mm Wall Thickness Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Ultichambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm ± 0.1 Mm Wall Thickness. Thepanels Filled Vertically And Tie Bar At Two Places By Insertinghorizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts Andwashers,Complete As Per Manufacturers Specification And Directionof Engineer-In- Charge. (For W.C. And Bathroom Door Shutter). , 10.1 Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting, Fixing In Position And Applying Apriming Coat Of Approved Steel Primer All Complete. , 10.26 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Ofhollow Tubes, Channels, Plates Etc. Including Welding, Grinding,Buffing, Polishing And Making Curvature (Wherever Required) Andfitting The Same With Necessary Stainless Steel Nuts And Boltscomplete I/C Fixing The Railing With Necessary Accessories And Stainlesssteel Dash Asteners , Stainless Steel Bolts Etc., Of Required Size, Onthe Top Of The Floor Or The Side Of Waist Slab With Suitablearrangement As Per Approval Of Engineer-In-Charge. ( Orpayment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , 11.3 Cement Concrete Flooring M-15 (Nominal Mix) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.11.3.1 40Mm Thick With 20Mm Maximum Size Of Stone Aggregate. , 11.34 Providing And Laying Rectified Glazed Ceramic Wall Tiles 300X450 Mm Or More (8Mm To 10Mm Thick) Of 1St Quality Conforming To Is : 15622 Of Approved Make In All Colours, Laid On 12 Mm Thick Cement Mortar1:3 (1 Cement : 3 Coarse Sand) Including Grauting The Joints With White Cement And Matching Pigments Etc., Complete. , 11.33 Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More (8Mm To 10Mm Thick) Of 1St Quality Conforming To Is : 15622 Of Approved Make In And Colours Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , 11.37 Providing And Laying Vitrified Floor Tiles Multi/Dobule Charged (Minimum Top Layer Thickness 2.0Mm) Neno Polished Self Design, In Different Size Withwater Absorption Less Than 0.05% And Conforming To Is : 15622 Of Approved Make In All Colours & Shades Ist Preminum Quality In Flooring Laid On 12Mm Thick Cement Mortar 1:4 (1 Cement : 4 Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete. (Thickness As Per Manufacturer Specification) , 11.43 Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine Ith Strong Vibratory Compaction And Of Approved Size And Design/Shape Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Stone Dust Sand, Filling The Joints With Coarse Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. , 12.8 Supply & Installation Of Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-Incharge) 0.50 Mm ±5% Total Coated Thickness (Tct) Thick Zinccoating 120Gsm As Per Is: 277 In 240Mpa Steel Grade, 5-7 Micronsepoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches While Transportation And Should Besupplied In Single Length Upto 12 Meter Or As Desired By Engineer-Incharge. The Sheet Shall Be Fixed Using Self Drilling/Self Tappingscrews Of Size (5.5X 55Mm) With Epdm Seal Or With Polymer Coatedj Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Leadcomplete Upto Any Pitch In Horizontal/Vertical Or Curved Surfacesexcluding The Cost Of Purlins, Rafters And Trusses And Includingcutting To Size And Shape Wherever Required. , 12.9 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm +/- 5% Total Coated Thickness (Tct) Thick Zinc Coating 120Gsm As Per Is: 277 In 240Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Or With Polymer Coated J Or L Hooks, Bolts And Nuts And Or G.I. Seam Bolts And Nuts, G.I. Plain And Bitumen Washers Complete : 12.9.1 Ridges Plain (500 - 600Mm). , 13.1 12 Mm Cement Plaster Of Mix :13.1.2 1:6 (1 Cement: 6 Sand) , 13.2 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix13.2.2 1:6 (1 Cement: 6 Sand) , 13.25 Providing And Applying 1.0 Mm Thick White Cement Based Wall Putty Of Best Quality, Over Plastered Surface To Prepare The Surface Even Andsmooth Complete. , 13.36 White Washing With Lime To Give An Even Shade:13.36.1 New Work (Three Or More Coats) , 13.39 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.41 Applying One Coat Of Cement Primer Of Approved Brand And Manufacture On Wall Surface : Cement Primer. , 13.57 Painting With Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade - Two Or More Coats On New Work , 15.2 Demolishing Cement Concrete Manually/By Mechanical Meansincluding Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. 15.2.1 1:3:6 Or Richer Mix , 15.2 Demolishing Cement Concrete Manually/By Mechanical Meansincluding Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge.15.2.2 1:4:8 Or Leaner Mix , 17.1.1.2 Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 17.1.2.2 Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 17.2 Providing And Fixing 12Mm Thick Prelaminated Particle Boardflat Pressed Three Layer Or Graded Wood Particle Board Conforming Tois: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors,Windows Shutters And Partition Frames With C.P. Brass / Stainlesssteel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge17.2.2 Pre-Laminated Particle Board With Decorative Lamination On Both Sides. , 17.3 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In- Charge (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): 17.3.1 With Float Glass Panes Of 4.0 Mm Thickness , 17.13 Providing And Fixing Aluminium Tubular Handle Bar 32 Mm Outerdia, 3.0 Mm Thick & 2100 Mm Long With Ss Screws Etc .Complete Asper Direction Of Engineer-In-Charge17.13.2 Powder Coated Minimum Thickness 50 Micron Aluminium Tubular Handle Bar. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.1 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.2 Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.3 Suspended Floors, Roofs, Landings, Balconies And Access Platform. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.5 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. , 20.2 Providing & Laying Of P.V.C. Pipe For Roof Top Harvesting From Roof Slab To Ground Floor Including All Fittings, Jointing Material With Bypassarrangement With Suitable Valves.20.2.3 P.V.C. Pipe 6Kg/Sqm (110 Mm) , 21.1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plane And Brass Threaded Fitting I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge.Internal Work - Exposed On Wall.21.1.1 15 Mm Nominal Outer Dia .Pipes , 21.1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plane And Brass Threaded Fitting I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge.Internal Work - Exposed On Wall.21.1.3 25 Mm Nominal Outer Dia .Pipes. , 21.14 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End):21.14.3 25 Mm Nominal Bore , 21.26 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 - 15 Mm Nominal Bore. , 21.29 Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Is:8931. - 15 Mm Nominal Bore. , 21.35 Providing And Fixing C.P. Brass Grating Of Approved Quality And Make Conforming To Is: Specification. - 100 Mm Dia. , 22.2 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Sand :10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W.Pipes Including Bed Concrete As Per Standard Design:22.2.1 100 Mm Diameter S.W. Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.4 300 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete : 22.6.5 450 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.6 500 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) Reinforced Cement Concrete Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.7 600 Mm Dia. Reinforced Cement Concrete Pipe , 22.10 Providing And Laying Below Ground Unplasticised Pvc Pipe To With Stand Working Pressure Of 4 Kg/Cm2 Soild Waste Pipes Confirming To Is:13592 And Is:4985 Including Jointing With Seal Ring Confirming To Is :5282 Leaving 10Mm Gap For Thermal Expansion All Necessary Fittings Etc. Complete. Excavation To Be Paid Seperataly.22.10.1 110 Mm Diameter Od , 22.10 Providing And Laying Below Ground Unplasticised Pvc Pipe To With Stand Working Pressure Of 4 Kg/Cm2 Soild Waste Pipes Confirming To Is:13592 And Is:4985 Including Jointing With Seal Ring Confirming To Is :5282 Leaving 10Mm Gap For Thermal Expansion All Necessary Fittings Etc. Complete. Excavation To Be Paid Seperataly.22.10.2 160 Mm Diameter Od , 23.1 Providing And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type) P Or S Trap, Complete Including Cutting And Making Good The Walls And Floors Wherever Required :23.1.2 Orissa Pattern W.C. Pan Of Size 580X440 Mm , 23.5 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 23.5.1 10 Litre Capacity - White , 23.7 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350mm And 340X410x265mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 23.7.1 One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern. , 23.9 Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe,White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required :23.9.1 Single Squatting Plate With 5 Litre P.V.C. Automatic Flushing Cistern. , 23.10 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern,Including Painting Of Fittings And Brackets, Cutting And Making Goodthe Walls Wherever Require :23.10.1 White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. , 23.56 Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 23.56.1 100 Mm Inlet And 100 Mm Outlet , 23.61 Providing And Fixing Unplasticised Pvc Soil And Waste Pipesconforming To Is: 13592 Type B Including Jointing With Seal Ringconforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion.Single Socketed Pipes For Working Pressure Of 4 Kg/Sqcm.23.61.1 75 Mm Diameter (Minimum Wall Thickness 3.2Mm) , 23.61.1 110 Mm Diameter (Minimum Wall Thickness 3.2Mm) , 23.62.1 Coupler23.62.1.1 75 Mm , 23.62 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings/ Accessories For Unplasticised (Pvc-U) Soil And Waste Pipes Conforming To Is: 13592 Type B Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion.23.62.1.2 110 Mm , 23.62.3 Single Tee With Door 23.62.3.2 110X110x110 Mm , 23.62.5 Bend 87.50 23.62.5.1 75 Mm Bend , 23.62.5 Bend 87.50 23.62.5.2 110 Mm Bend , 23.62.11 N-Trap Without Jaliut Jali 23.62.11.1 110X75 Mm , 23.62.11 N-Trap Without Jali2 3.62.11.2 110X110 Mm , 23.65 Providing And Fixing Vitreous China Dual Purpose Closet Suitable For Use As Squatting Pan Or European Type Water Closet (Anglo Indian W.C Pan) With Seat Lid With C.P. Rass Hinges And Rubber Buffers, 10 Litre Low Level Flushing Cistern With Fitting And Brackets, 40Mm Flush Bend 20Mm Over Flow Pipe With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 23.65.1 White Vitreous China Dual Purpose Wc Pan With White Solid Plasticseat And Lid With White Vitreous China Flushing Cistern And C.P. Flushbend. , 3.2 Wiring In Surface Rigid Pvc Casing And Capping System With Modular Accessories Point Wiring Including Metallic Switch Box, Sheet, Switche, Socket, Lamp Holders/Ceiling Roses Etc With 1.5 Sq. Mm. Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C. Casing And Capping Isi Marked Of Suitable Size And 1.5Sq. Mm. Pvc Insulated Copper Earth Continuity Conductor Of Green Colour Inside Casing & Capping Including Painting Etc. As Required As Per Specification For :- 3.2.1 Light Point/Fan Points. 1 A) Short Point , 2 B) Medium Point , 3 C) Long Point , 3.1.6 Circuit Wiring Wiring For Circuit Wiring With Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C. Casing And Capping Of Isi Marked Suitable Size Including Painting Etc. As Required As Per Specificationecification 1 A) 2X2.5 Sq.Mm. , 3.3.3 Power Wiring In Pvc Casing Caping System With Mobular Accessories Point Wiring Including Metallic Switch Box, Sheet For 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. Mm. Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C.Casing And Capping Isi Marked Of Suitable Size Including Painting Etc. With 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. Of Isi Marked And 4 Sq. Mm. Pvc Insulated Copper Earth Continuity Conduc On Separate Board A. Short Point , B. Medium Point , 4.3.3 4.00 Sq Mm Cable 2 2 X 4.00 Sq Mm , 8.5.2 Single Pole & Neutral(Spn) 1 0.5 annual periodical maintenance To 5 annual periodical maintenance Rating 8.5 Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker (Mcb) Of C Series Suitable For 240/415 Volts, 50 Cycle , 10 Ka Value Ac Supply Confirming To Is : 8828 : 1996, Iec : 60898 :2002 But Without Enclosures :- , 8.5 Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker (Mcb) Of C Series Suitable For 240/415 Volts, 50 Cycle , 10 Ka Value Ac Supply Confirming To Is : 8828 : 1996, Iec : 60898:2002 But Without Enclosures : 8.5.1 Single Pole (Sp)2 6 annual periodical maintenance To 32 annual periodical maintenance Rating , 9.23 Supplying,Fixing And Testing Of Compact Flourescent Lamp (Cfl) With Inbuilt Electronic Ballast Isi Marked Of Approved Make As Required As Per Specification6. 20 Watt , 9.31 Suppling And Fixing Of Approved Make Step Type Modular Electronic, Fan Regulator Single/Double Module Including Connection Etc. As Required On Existing Board1 450 Watt , 9.32 Supplying, Erection And Testing Of Approved Make Electric Ceiling Fan Of Double Ball Bearing Complete With Standard Down Rod, Canopy, Hangingshackle, Aluminium Lades, Without Regulator, A.C. 230-250 Volts Including Connections With All Necessary Material Complete As Required Confirming To Is :374/1979 With Upto Date Ammendments. 1 Ceiling Fan (Energy Saver 50 W)-1200 Mm Sweep , 19.1 Supply And Fixing Of Led Tube Rod Comprising Of Led Tube With Non Integral /Integral Driver, 6500K Color Temp Having 40000 Burning Hrs Life Withminimum @ L 70, System Lumen Output Should Be Minimum With Efficacy 80 Lm/W. Led Driver providing fixing 0.95 & Thd 20%. The Colour Rendering Index Ofled Light Should Be More Than 70.Submission Lm 80-08 Form Led Sourcemanufacturer & Lm79-08 / Is16106 From Nabl Approved Lab.Manufacturer Mandatory I/C Connection Wire, Testing Etc.To Complete The Job.2 Yrs Guarantee Ertificate From Manufacturer.19.1.1 1 X 5/8W Integral Tube Fitting Complete , 19.9 Supplying Of Street Light With High Power Led Of 1 To 3 W Each Assembled On Single Mcpcb, System Lumens Output With Efficacy110 Lm/W. Luminiare Having Color Temp 6500K & 50000 Burning Hrs Life With Minimum @ L 70, The Colour Rendering Index Of Led Light Should Be More Than 70. Luminiare Comprises Of Driver, providing fixing 0.95 & Surge Protection 4Kv. Housing Made Of Pressure Die Cast Aluminium With Heat Resistant Flat Glass / Lens Type, Ip66 Protection. Submission Lm 80-08 Form Led Source Manufacturer & Lm79-08 / Is16106 From Nabl Approved Lab. Manufacturer Manadatory I/C 50Mm.Dia G.I. Pipe Bracket Upto 2 Mtr. Long In Required Angle/Shape, Connection Lead, Testing Etc To Complete The Job. 2 Yrs Guarantee Certificate From Manufacturer.19.9.2 40W / 48W , Nail (Hardware Material) , Gi Wire , Welding Rod , Welding Handle , Nut Bold , Brass - 2,4,5,6, , Roller , Sand Material , 4Cutter Blade , 12Cutter Blade , Chainlink Mesh , Angle 35X35x5m , Angle40x40x5m , Ms Pipe 1½, , Ms Pipe 2 , Ms Pipe 3, , Ms Pipe 4, , 2Mm Ms Steel Sheet, , 3Mm Ms Steel Sheet, , Profile Sheet , Screw , Glue Tape , Wood Cutter Chain , Ms Mesh , Ply Board , Cement

BOQ

Name of Work:- INVITING RATES OF MATERIALS FOR ROUTINE, GENERAL, ORDINARY, REPAIR WORK FOR THE FINACIAL YEAR 2026-27 AT NAGAR PALIKA PARISAD MANDAL DIST. MANDAL (M.P)
Sl. No. Item Description
1INVITING RATES OF MATERIALS FOR ROUTINE, GENERAL, ORDINARY, REPAIR WORK FOR THE FINACIAL YEAR 2026-27 AT NAGAR PALIKA PARISAD MANDAL DIST. MANDAL (M.P)
26.6 Providing and laying Cement Concrete grade M-20 (Nominal mix 1:1.5:3)with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate /screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bituminous sealant (without dowelbars). (max. thickness 20cm)Cum 5420.006.7 Deduct from Item No.6.2, 6.3 and 6.6 above if paver with electronic sensoris not used and laying, compaction is done by any other method(Note :- The acceptance criteria regarding level, thickness, surface regularity, texture finish, strength of concrete and all other quality control measures shall be the same as in case of machine laid work.) This item is to be executed with Prior written permission of Engineerin-charge
31PCC M-15 in FoundationPlain cement concrete M-15 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MORT&H Specification 409.
4Providing and placing in position factory-made precast cement ncreteBox-Culvert as per design and shape, using coarse aggregate and fineaggregate derived from natural sources, ordinary Portland/ admixtures asper design mix IS: 456-2000 and standard like Indian standardinternational standard viz. japaness industrial standard (JIS) /US standard/EU standard having of strength not less than M-50, using hermoMechanically Treated bars,(TMT/TMX) FE 500D or more conforming toIS 1786 reinforcement bar and capable of carrying a wheel load of 32.5Tones with earth cushion 0.20 m to 0.50 m for heavy vehicle movement.Rate includes all cost of material, labor charges at the plant, cost ofreinforcement, formwork and lifting accessories, and transportation up to work at the site. Making necessary holes of required sizes for carryingthrough service lines etc. providing steel hooks for lifting etc. the work tobe executed as per the direction of Engineer in-Charge.n-Charge.(i) Box Culvert Size 500x500 mm Th 120mm
5(iii) Box Culvert Size 800x800 mm Th 120 mm
616.5 Providing and Applying (10mm thick Average) epoxy mortar (includingprimer & seal coat) over leached, honey combed and spalled concretesurface and exposed steel reinforcement complete as per Technical specification
716.6 Patching of damaged concrete surface, (25mm thick average) with polymer modified cementitious mortar to be applied as per instructions ofmanufacturer and as approved by the Engineer.
89.1 Supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site including all lead and stacking etc. complete. e 22.4mm standard size crushed stone
9c 40mm standard size crushed stone
10g 11.2mm standard size crushed stone
11i Crusher stone dust
12j Moorum with CBR not less than 7
132.6 Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) includingramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil
14Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.6 Cement concrete grade M-10 (Nominal Mix) with 40 mm maximum size of stone aggregate
15Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.4.1.2 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate
16Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate
17Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases up to floortwo level excluding the cost of entering, shuttering and reinforcementwith Cement concrete grade M-20 (Nominal Mix) with 20 mm maximumsize of stone aggregate.
18Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas,lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.5.11.4 Thermo-Mechanically Treated bars. (Fe 500 D or more)
196.13 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 50 (average compressive strength) upto plinth level : 6.13.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
206.14 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 50 (average compressive strength) insuperstructure above plinth level up to floor 2 level including the cost of scaffolding : 6.14.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
216.15 Half Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 50 ( average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding :6.15.2 Cement mortar 1:4 (1 cement : 4 coarse sand)
227.1 Random rubble masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
239.114 Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance ±1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge sidevertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainlesssteel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge9.114.1 Extruded section profile size 48x40 mm.
249.115.1 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides.The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0mm and stainless steel screws.The styles of the shutte rreinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness.The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC ultichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. Thepanels filled vertically and tie bar at two places by insertinghorizontally 6 mm galvanised M.S. rod and fastened with nuts andwashers,complete as per manufacturer's specification and directionof Engineer-in- charge. (For W.C. and bathroom door shutter).
2510.1 Structural steel work in single section fixed with or without connectingplate including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer all complete.
2610.26 Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc. including welding, grinding,buffing, polishing and making curvature (wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete i/c fixing the railing with necessary accessories and stainlesssteel dash asteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge. ( orpayment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
2711.3 Cement concrete flooring M-15 (nominal mix) finished with a floating coatof neat cement including cement slurry, but excluding the cost of nosing ofsteps etc. complete.11.3.1 40mm thick with 20mm maximum size of stone aggregate.
2811.34 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in all colours, laid on 12 mm thick Cement Mortar1:3 (1 Cement : 3 Coarse sand) including grauting the joints with white cement and matching pigments etc., complete.
2911.33 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in and colours laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
3011.37 Providing and laying vitrified floor tiles Multi/Dobule charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size withwater absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades Ist preminum quality in flooring laid on 12mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. (thickness as per manufacturer specification)
3111.43 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.
3212.8 Supply & installation of precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm ±5% total coated thickness (TCT) thick Zinccoating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches while transportation and should besupplied in single length upto 12 meter or as desired by Engineer-incharge. The sheet shall be fixed using self drilling/self tappingscrews of size (5.5x 55mm) with EPDM seal or with polymer coatedJ or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white leadcomplete upto any pitch in horizontal/vertical or curved surfacesexcluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.
3312.9 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : 12.9.1 Ridges plain (500 - 600mm).
3413.1 12 mm cement plaster of mix :13.1.2 1:6 (1 cement: 6 sand)
3513.2 15 mm cement plaster on rough side of single or half brick wall of mix13.2.2 1:6 (1 cement: 6 sand)
3613.25 Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even andsmooth complete.
3713.36 White washing with lime to give an even shade:13.36.1 New work (three or more coats)
3813.39 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
3913.41 Applying one coat of cement primer of approved brand and manufacture on wall surface : Cement primer.
4013.57 Painting with aluminium paint of approved brand and manufacture to give an even shade - Two or more coats on new work
4115.2 Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-in-charge. 15.2.1 1:3:6 or richer mix
4215.2 Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-in-charge.15.2.2 1:4:8 or leaner mix
4317.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)
4417.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)
4517.2 Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board conforming toIS: 12823 Grade l Type ll, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass / stainlesssteel screws etc. complete as per architectural drawings anddirections of Engineer-in-charge17.2.2 Pre-laminated particle board with decorative lamination on both sides.
4617.3 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM Rubber neoprenegasket etc. complete as per the architectural drawings and thedirections of engineer-in- charge (Cost of aluminium snap beadingshall be paid in basic item): 17.3.1 With float glass panes of 4.0 mm thickness
4717.13 Providing and fixing aluminium tubular handle bar 32 mm outerdia, 3.0 mm thick & 2100 mm long with SS screws etc .complete asper direction of Engineer-in-Charge17.13.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar.
4819.1 Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply woodshuttering for :19.1.1 Foundations, footings, bases of columns, etc. For mass concrete.
4919.1 Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :19.1.2 Walls (any thickness) including attached pilasters, butteresses, plinthand string courses etc
5019.1 Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :19.1.3 Suspended floors, roofs, landings, balconies and access platform.
5119.1 Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :19.1.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.
5220.2 Providing & laying of P.V.C. pipe for roof top harvesting from roof slab to Ground floor including all fittings, jointing material with bypassarrangement with suitable valves.20.2.3 P.V.C. pipe 6kg/sqm (110 mm)
5321.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall.21.1.1 15 mm nominal outer dia .Pipes
5421.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall.21.1.3 25 mm nominal outer dia .Pipes.
5521.14 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):21.14.3 25 mm nominal bore
5621.26 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.
5721.29 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. - 15 mm nominal bore.
5821.35 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. - 100 mm dia.
5922.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand :10 graded stone aggregate 40 mm nominal size) all-round S.W.pipes including bed concrete as per standard design:22.2.1 100 mm diameter S.W. pipe
6022.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :22.6.4 300 mm dia. R.C.C. pipe
6122.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete : 22.6.5 450 mm dia. R.C.C. pipe
6222.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :22.6.6 500 mm dia. R.C.C. pipe
6322.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :22.6.7 600 mm dia. R.C.C. pipe
6422.10 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.22.10.1 110 mm diameter OD
6522.10 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.22.10.2 160 mm diameter OD
6623.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap, complete including cutting and making good the walls and floors wherever required :23.1.2 Orissa pattern W.C. pan of size 580x440 mm
6723.5 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 23.5.1 10 litre capacity - White
6823.7 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders withbrass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 23.7.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
6923.9 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe,white P.V.C. automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling completeincluding painting of fittings and cutting and making good the walls and floors etc. wherever required :23.9.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern.
7023.10 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making goodthe walls wherever require :23.10.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
7123.56 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 23.56.1 100 mm inlet and 100 mm outlet
7223.61 Providing and fixing unplasticised PVC soil and waste pipesconforming to IS: 13592 Type B including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes for working pressure of 4 kg/sqcm.23.61.1 75 mm diameter (minimum wall thickness 3.2mm)
7323.61.1 110 mm diameter (minimum wall thickness 3.2mm)
7423.62.1 Coupler23.62.1.1 75 mm
7523.62 Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised (PVC-u) soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.23.62.1.2 110 mm
7623.62.3 Single tee with door 23.62.3.2 110x110x110 mm
7723.62.5 Bend 87.50 23.62.5.1 75 mm bend
7823.62.5 Bend 87.50 23.62.5.2 110 mm bend
7923.62.11 N-Trap without Jaliut Jali 23.62.11.1 110x75 mm
8023.62.11 N-Trap without Jali2 3.62.11.2 110x110 mm
8123.65 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. rass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 23.65.1 White vitreous china dual purpose WC pan with white solid plasticseat and lid with white vitreous china flushing cistern and C.P. flushbend.
823.2 WIRING IN SURFACE RIGID PVC CASING AND CAPPING SYSTEM WITH MODULAR ACCESSORIES Point wiring including metallic switch box, sheet, switche, socket, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING ISI Marked of suitable size and 1.5Sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & capping including painting etc. as required as per specification for :- 3.2.1 Light Point/Fan Points. 1 a) Short point
832 b) Medium point
843 c) Long point
853.1.6 Circuit WiringWiring for circuit wiring with PVC insulated cable FR with coppermulti strand conductor ISI marked in Surface rigid P.V.C. CASINGAND CAPPING of ISI marked suitable size including painting etc. asrequired as per specificationecification1 a) 2x2.5 Sq.mm.
863.3.3 Power Wiring in PVC Casing Caping System with Mobular Accessories Point wiring including metallic switch box, sheet for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.CASING AND CAPPING ISI Marked of suitable size includingpainting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conduc On Separate BoardA. Short Point
87B. Medium Point
884.3.3 4.00 Sq mm cable 2 2 X 4.00 sq mm
898.5.2 SINGLE POLE & NEUTRAL(SPN) 1 0.5 Amp to 5 Amp Rating 8.5 Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :-
908.5 Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :8.5.1 SINGLE POLE (SP)2 6 Amp to 32 Amp Rating
919.23 Supplying,Fixing and Testing of Compact Flourescent Lamp (CFL) with inbuilt electronic ballast ISI marked of approved make as required as per specification6. 20 Watt
929.31 Suppling and fixing of approved make step type Modular electronic, Fan regulator single/double module including connection etc. as required on existing board1 450 Watt
939.32 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hangingshackle, Aluminium lades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments. 1 Ceiling Fan (Energy Saver 50 W)-1200 mm Sweep
9419.1 Supply and fixing of LED tube rod comprising of LED tube with non integral /integral driver, 6500K color temp having 40000 burning hrs life withminimum @ L 70, system lumen output should be minimum with efficacy >80 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index ofLED light should be more than 70.Submission LM 80-08 Form LED SourceManufacturer & LM79-08 / IS16106 from NABL approved lab.Manufacturer mandatory i/c connection wire, testing etc.to complete the job.2 Yrs Guarantee ertificate from manufacturer.19.1.1 1 X 5/8W Integral Tube fitting complete
9519.9 Supplying of street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>110 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 4KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP66 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer.19.9.2 40W / 48W
96Nail (hardware material)
97GI wire
98welding rod
99welding handle
100nut bold
101Brass - 2'',4'',5'',6'',
102roller
103sand material
1044''cutter blade
10512''cutter blade
106chainlink mesh
107angle 35x35x5m
108angle40x40x5m
109ms pipe 1½,
110ms pipe 2\\"
111ms pipe 3\\",
112ms pipe 4\\",
1132mm MS steel sheet,
1143mm MS steel sheet,
115profile sheet
116screw
117glue tape
118wood cutter chain
119MS mesh
120ply board
121cement Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58570800
AUTHORITY Local Bodies
TENDER VALUE 20 Lakhs
LAST DATE 18-12-2026
Authority
Authority Name Nagar Palika Nigam
Work Description Tender for Inviting Rates Of Materials For Routine, General, Ordinary, Repair Work For The Finacial Year 2026-27 At Nagar Palika Parisad Mandal Dist. Mandal (M.P) , Inviting Rates Of Materials For Routine, General, Ordinary, Repair Work For The Finacial Year 2026-27 At Nagar Palika Parisad Mandal Dist. Mandal (M.P) , 6.6 Providing And Laying Cement Concrete Grade M-20 (Nominal Mix 1:1.5:3)With 20 Mm Graded Crushed Stone Aggregate, Mixing Shall Be In Mechanical Mixer, Laying With Paver Compacting By Use Of Pin, Plate /Screed Vibrators Including Form Work By Strong Steel Girders Fixed By Spikes, Separation Membrane 125 Micron Thick, I/C Cutting Of Joints @ 4 To 5 M Interval & Filling It With Hot Applied Bituminous Sealant (Without Dowelbars). (Max. Thickness 20Cm)Cum 5420.006.7 Deduct From Item No.6.2, 6.3 And 6.6 Above If Paver With Electronic Sensoris Not Used And Laying, Compaction Is Done By Any Other Method(Note :- The Acceptance Criteria Regarding Level, Thickness, Surface Regularity, Texture Finish, Strength Of Concrete And All Other Quality Control Measures Shall Be The Same As In Case Of Machine Laid Work.) This Item Is To Be Executed With Prior Written Permission Of Engineerin-Charge , 1Pcc M-15 In Foundationplain Cement Concrete M-15 Mix With Crushed Stone Aggregate 40 Mm Nominal Size Mechanically Mixed, Placed In Foundation And Compacted By Vibration Including Curing For 14 Days. As Per Mort&H Specification 409. , Providing And Placing In Position Factory-Made Precast Cement Ncretebox-Culvert As Per Design And Shape, Using Coarse Aggregate And Fineaggregate Derived From Natural Sources, Ordinary Portland/ Admixtures Asper Design Mix Is: 456-2000 And Standard Like Indian Standardinternational Standard Viz. Japaness Industrial Standard (Jis) /Us Standard/Eu Standard Having Of Strength Not Less Than M-50, Using Hermomechanically Treated Bars,(Tmt/Tmx) Fe 500D Or More Conforming Tois 1786 Reinforcement Bar And Capable Of Carrying A Wheel Load Of 32.5 Tones With Earth Cushion 0.20 M To 0.50 M For Heavy Vehicle Movement.Rate Includes All Cost Of Material, Labor Charges At The Plant, Cost Ofreinforcement, Formwork And Lifting Accessories, And Transportation Up To Work At The Site. Making Necessary Holes Of Required Sizes For Carryingthrough Service Lines Etc. Providing Steel Hooks For Lifting Etc. The Work Tobe Executed As Per The Direction Of Engineer In-Charge.N-Charge.(I) Box Culvert Size 500X500 Mm Th 120Mm , (Iii) Box Culvert Size 800X800 Mm Th 120 Mm , 16.5 Providing And Applying (10Mm Thick Average) Epoxy Mortar (Includingprimer & Seal Coat) Over Leached, Honey Combed And Spalled Concretesurface And Exposed Steel Reinforcement Complete As Per Technical Specification , 16.6 Patching Of Damaged Concrete Surface, (25Mm Thick Average) With Polymer Modified Cementitious Mortar To Be Applied As Per Instructions Ofmanufacturer And As Approved By The Engineer. , 9.1 Supply Of Mineral Aggregate Like Broken Stone/Crushed Stone /Stone Dust/ Moorum At Road Site Including All Lead And Stacking Etc. Complete. E 22.4Mm Standard Size Crushed Stone , C 40Mm Standard Size Crushed Stone , G 11.2Mm Standard Size Crushed Stone , I Crusher Stone Dust , J Moorum With Cbr Not Less Than 7 , 2.6 Earth Work In Excavation For Foundation, Trenches For Pipes / Cables Or Drains Etc. By Mechanical Means /Manual Means (Exceeding 30Cm In Depth.) Includingramming Of Bottom, Dressing Of Sides, Disposal Of Excavated Earth Including Of All Lift And Lead Upto 50M. Disposed Earth To Be Levelled And Neatly Dressed. 2.6.1 All Kinds Of Soil , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level.6 Cement Concrete Grade M-10 (Nominal Mix) With 40 Mm Maximum Size Of Stone Aggregate , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level.4.1.2 Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximum Size Of Stone Aggregate , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximum Size Of Stone Aggregate , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels,Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floortwo Level Excluding The Cost Of Entering, Shuttering And Reinforcementwith Cement Concrete Grade M-20 (Nominal Mix) With 20 Mm Maximumsize Of Stone Aggregate. , Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding Upto Floor Level Including Cost Of Binding Wire, Wastage And Over Laps Upto 12Mm Horizontal/ Inclined Position Of Reinforcement Bars In Slab And Beams, Plinth, Chajjas,Lintels, Upto 4.5M Vertical Length Of Reinforcement In Wall Columns (Over Laps Shall Be Provided As Per Requirement Of Is : 13920; Is 456 & Sp : 34) Etc. Complete.5.11.4 Thermo-Mechanically Treated Bars. (Fe 500 D Or More) , 6.13 Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894- 2002, Class Designation 50 (Average Compressive Strength) Upto Plinth Level : 6.13.2 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 6.14 Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894- 2002, Class Designation 50 (Average Compressive Strength) Insuperstructure Above Plinth Level Up To Floor 2 Level Including The Cost Of Scaffolding : 6.14.2 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 6.15 Half Brick Work With Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894-2002, Class Designation 50 ( Average Compressive Strength) In Superstructure Above Plinth Level Up To Floor 2 Level Including The Cost Of Scaffolding :6.15.2 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 7.1 Random Rubble Masonry With Hard Stone In Foundation And Plinth With Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 9.114 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Section Having An Overall Dimension As Below (Tolerance ±1Mm) With Wall Thickness 2.0Mm ± 0.2Mm, Corners Of The Door Frame To Be Mitred And Welded Of Plastic, Galvanized Brackets And Stainless Steel Screws. The Hinge Sidevertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19Mm And 1Mm ± 0.1Mm Wall Thickness And 3 Nos. Stainlesssteel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge9.114.1 Extruded Section Profile Size 48X40 Mm. , 9.115.1 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm ± 0.2 Mm With Inbuilt Edging On Both Sides.The Styles And Rails Mitred And Joined At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0Mm And Stainless Steel Screws.The Styles Of The Shutte Rreinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm ± 0.1 Mm Wall Thickness.The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm ± 0.2 Mm Wall Thickness Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Ultichambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm ± 0.1 Mm Wall Thickness. Thepanels Filled Vertically And Tie Bar At Two Places By Insertinghorizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts Andwashers,Complete As Per Manufacturers Specification And Directionof Engineer-In- Charge. (For W.C. And Bathroom Door Shutter). , 10.1 Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting, Fixing In Position And Applying Apriming Coat Of Approved Steel Primer All Complete. , 10.26 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Ofhollow Tubes, Channels, Plates Etc. Including Welding, Grinding,Buffing, Polishing And Making Curvature (Wherever Required) Andfitting The Same With Necessary Stainless Steel Nuts And Boltscomplete I/C Fixing The Railing With Necessary Accessories And Stainlesssteel Dash Asteners , Stainless Steel Bolts Etc., Of Required Size, Onthe Top Of The Floor Or The Side Of Waist Slab With Suitablearrangement As Per Approval Of Engineer-In-Charge. ( Orpayment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , 11.3 Cement Concrete Flooring M-15 (Nominal Mix) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.11.3.1 40Mm Thick With 20Mm Maximum Size Of Stone Aggregate. , 11.34 Providing And Laying Rectified Glazed Ceramic Wall Tiles 300X450 Mm Or More (8Mm To 10Mm Thick) Of 1St Quality Conforming To Is : 15622 Of Approved Make In All Colours, Laid On 12 Mm Thick Cement Mortar1:3 (1 Cement : 3 Coarse Sand) Including Grauting The Joints With White Cement And Matching Pigments Etc., Complete. , 11.33 Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More (8Mm To 10Mm Thick) Of 1St Quality Conforming To Is : 15622 Of Approved Make In And Colours Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , 11.37 Providing And Laying Vitrified Floor Tiles Multi/Dobule Charged (Minimum Top Layer Thickness 2.0Mm) Neno Polished Self Design, In Different Size Withwater Absorption Less Than 0.05% And Conforming To Is : 15622 Of Approved Make In All Colours & Shades Ist Preminum Quality In Flooring Laid On 12Mm Thick Cement Mortar 1:4 (1 Cement : 4 Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete. (Thickness As Per Manufacturer Specification) , 11.43 Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine Ith Strong Vibratory Compaction And Of Approved Size And Design/Shape Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Stone Dust Sand, Filling The Joints With Coarse Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. , 12.8 Supply & Installation Of Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-Incharge) 0.50 Mm ±5% Total Coated Thickness (Tct) Thick Zinccoating 120Gsm As Per Is: 277 In 240Mpa Steel Grade, 5-7 Micronsepoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches While Transportation And Should Besupplied In Single Length Upto 12 Meter Or As Desired By Engineer-Incharge. The Sheet Shall Be Fixed Using Self Drilling/Self Tappingscrews Of Size (5.5X 55Mm) With Epdm Seal Or With Polymer Coatedj Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Leadcomplete Upto Any Pitch In Horizontal/Vertical Or Curved Surfacesexcluding The Cost Of Purlins, Rafters And Trusses And Includingcutting To Size And Shape Wherever Required. , 12.9 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm +/- 5% Total Coated Thickness (Tct) Thick Zinc Coating 120Gsm As Per Is: 277 In 240Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Or With Polymer Coated J Or L Hooks, Bolts And Nuts And Or G.I. Seam Bolts And Nuts, G.I. Plain And Bitumen Washers Complete : 12.9.1 Ridges Plain (500 - 600Mm). , 13.1 12 Mm Cement Plaster Of Mix :13.1.2 1:6 (1 Cement: 6 Sand) , 13.2 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix13.2.2 1:6 (1 Cement: 6 Sand) , 13.25 Providing And Applying 1.0 Mm Thick White Cement Based Wall Putty Of Best Quality, Over Plastered Surface To Prepare The Surface Even Andsmooth Complete. , 13.36 White Washing With Lime To Give An Even Shade:13.36.1 New Work (Three Or More Coats) , 13.39 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.41 Applying One Coat Of Cement Primer Of Approved Brand And Manufacture On Wall Surface : Cement Primer. , 13.57 Painting With Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade - Two Or More Coats On New Work , 15.2 Demolishing Cement Concrete Manually/By Mechanical Meansincluding Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. 15.2.1 1:3:6 Or Richer Mix , 15.2 Demolishing Cement Concrete Manually/By Mechanical Meansincluding Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge.15.2.2 1:4:8 Or Leaner Mix , 17.1.1.2 Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 17.1.2.2 Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 17.2 Providing And Fixing 12Mm Thick Prelaminated Particle Boardflat Pressed Three Layer Or Graded Wood Particle Board Conforming Tois: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors,Windows Shutters And Partition Frames With C.P. Brass / Stainlesssteel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge17.2.2 Pre-Laminated Particle Board With Decorative Lamination On Both Sides. , 17.3 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In- Charge (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): 17.3.1 With Float Glass Panes Of 4.0 Mm Thickness , 17.13 Providing And Fixing Aluminium Tubular Handle Bar 32 Mm Outerdia, 3.0 Mm Thick & 2100 Mm Long With Ss Screws Etc .Complete Asper Direction Of Engineer-In-Charge17.13.2 Powder Coated Minimum Thickness 50 Micron Aluminium Tubular Handle Bar. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.1 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.2 Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.3 Suspended Floors, Roofs, Landings, Balconies And Access Platform. , 19.1 Centering And Shuttering Including Strutting, Propping Stretching Etc. Complete For And Removal Of Form Work By Sheet Plate Or Ply Wood Shuttering For :19.1.5 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. , 20.2 Providing & Laying Of P.V.C. Pipe For Roof Top Harvesting From Roof Slab To Ground Floor Including All Fittings, Jointing Material With Bypassarrangement With Suitable Valves.20.2.3 P.V.C. Pipe 6Kg/Sqm (110 Mm) , 21.1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plane And Brass Threaded Fitting I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge.Internal Work - Exposed On Wall.21.1.1 15 Mm Nominal Outer Dia .Pipes , 21.1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plane And Brass Threaded Fitting I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge.Internal Work - Exposed On Wall.21.1.3 25 Mm Nominal Outer Dia .Pipes. , 21.14 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End):21.14.3 25 Mm Nominal Bore , 21.26 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 - 15 Mm Nominal Bore. , 21.29 Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Is:8931. - 15 Mm Nominal Bore. , 21.35 Providing And Fixing C.P. Brass Grating Of Approved Quality And Make Conforming To Is: Specification. - 100 Mm Dia. , 22.2 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Sand :10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W.Pipes Including Bed Concrete As Per Standard Design:22.2.1 100 Mm Diameter S.W. Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.4 300 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete : 22.6.5 450 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) R.C.C.Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.6 500 Mm Dia. Reinforced Cement Concrete Pipe , 22.6 Providing And Laying Non-Pressure Np2 Class (Light Duty) Reinforced Cement Concrete Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In Theproportion Of 1:2 (1 Cement : 2 Fine Sand) Including Testing Of Jointsetc. Complete :22.6.7 600 Mm Dia. Reinforced Cement Concrete Pipe , 22.10 Providing And Laying Below Ground Unplasticised Pvc Pipe To With Stand Working Pressure Of 4 Kg/Cm2 Soild Waste Pipes Confirming To Is:13592 And Is:4985 Including Jointing With Seal Ring Confirming To Is :5282 Leaving 10Mm Gap For Thermal Expansion All Necessary Fittings Etc. Complete. Excavation To Be Paid Seperataly.22.10.1 110 Mm Diameter Od , 22.10 Providing And Laying Below Ground Unplasticised Pvc Pipe To With Stand Working Pressure Of 4 Kg/Cm2 Soild Waste Pipes Confirming To Is:13592 And Is:4985 Including Jointing With Seal Ring Confirming To Is :5282 Leaving 10Mm Gap For Thermal Expansion All Necessary Fittings Etc. Complete. Excavation To Be Paid Seperataly.22.10.2 160 Mm Diameter Od , 23.1 Providing And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type) P Or S Trap, Complete Including Cutting And Making Good The Walls And Floors Wherever Required :23.1.2 Orissa Pattern W.C. Pan Of Size 580X440 Mm , 23.5 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 23.5.1 10 Litre Capacity - White , 23.7 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350mm And 340X410x265mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 23.7.1 One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern. , 23.9 Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe,White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required :23.9.1 Single Squatting Plate With 5 Litre P.V.C. Automatic Flushing Cistern. , 23.10 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern,Including Painting Of Fittings And Brackets, Cutting And Making Goodthe Walls Wherever Require :23.10.1 White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. , 23.56 Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 23.56.1 100 Mm Inlet And 100 Mm Outlet , 23.61 Providing And Fixing Unplasticised Pvc Soil And Waste Pipesconforming To Is: 13592 Type B Including Jointing With Seal Ringconforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion.Single Socketed Pipes For Working Pressure Of 4 Kg/Sqcm.23.61.1 75 Mm Diameter (Minimum Wall Thickness 3.2Mm) , 23.61.1 110 Mm Diameter (Minimum Wall Thickness 3.2Mm) , 23.62.1 Coupler23.62.1.1 75 Mm , 23.62 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings/ Accessories For Unplasticised (Pvc-U) Soil And Waste Pipes Conforming To Is: 13592 Type B Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion.23.62.1.2 110 Mm , 23.62.3 Single Tee With Door 23.62.3.2 110X110x110 Mm , 23.62.5 Bend 87.50 23.62.5.1 75 Mm Bend , 23.62.5 Bend 87.50 23.62.5.2 110 Mm Bend , 23.62.11 N-Trap Without Jaliut Jali 23.62.11.1 110X75 Mm , 23.62.11 N-Trap Without Jali2 3.62.11.2 110X110 Mm , 23.65 Providing And Fixing Vitreous China Dual Purpose Closet Suitable For Use As Squatting Pan Or European Type Water Closet (Anglo Indian W.C Pan) With Seat Lid With C.P. Rass Hinges And Rubber Buffers, 10 Litre Low Level Flushing Cistern With Fitting And Brackets, 40Mm Flush Bend 20Mm Over Flow Pipe With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 23.65.1 White Vitreous China Dual Purpose Wc Pan With White Solid Plasticseat And Lid With White Vitreous China Flushing Cistern And C.P. Flushbend. , 3.2 Wiring In Surface Rigid Pvc Casing And Capping System With Modular Accessories Point Wiring Including Metallic Switch Box, Sheet, Switche, Socket, Lamp Holders/Ceiling Roses Etc With 1.5 Sq. Mm. Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C. Casing And Capping Isi Marked Of Suitable Size And 1.5Sq. Mm. Pvc Insulated Copper Earth Continuity Conductor Of Green Colour Inside Casing & Capping Including Painting Etc. As Required As Per Specification For :- 3.2.1 Light Point/Fan Points. 1 A) Short Point , 2 B) Medium Point , 3 C) Long Point , 3.1.6 Circuit Wiring Wiring For Circuit Wiring With Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C. Casing And Capping Of Isi Marked Suitable Size Including Painting Etc. As Required As Per Specificationecification 1 A) 2X2.5 Sq.Mm. , 3.3.3 Power Wiring In Pvc Casing Caping System With Mobular Accessories Point Wiring Including Metallic Switch Box, Sheet For 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. Mm. Pvc Insulated Cable Fr With Copper Multi Strand Conductor Isi Marked In Surface Rigid P.V.C.Casing And Capping Isi Marked Of Suitable Size Including Painting Etc. With 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. Of Isi Marked And 4 Sq. Mm. Pvc Insulated Copper Earth Continuity Conduc On Separate Board A. Short Point , B. Medium Point , 4.3.3 4.00 Sq Mm Cable 2 2 X 4.00 Sq Mm , 8.5.2 Single Pole & Neutral(Spn) 1 0.5 annual periodical maintenance To 5 annual periodical maintenance Rating 8.5 Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker (Mcb) Of C Series Suitable For 240/415 Volts, 50 Cycle , 10 Ka Value Ac Supply Confirming To Is : 8828 : 1996, Iec : 60898 :2002 But Without Enclosures :- , 8.5 Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker (Mcb) Of C Series Suitable For 240/415 Volts, 50 Cycle , 10 Ka Value Ac Supply Confirming To Is : 8828 : 1996, Iec : 60898:2002 But Without Enclosures : 8.5.1 Single Pole (Sp)2 6 annual periodical maintenance To 32 annual periodical maintenance Rating , 9.23 Supplying,Fixing And Testing Of Compact Flourescent Lamp (Cfl) With Inbuilt Electronic Ballast Isi Marked Of Approved Make As Required As Per Specification6. 20 Watt , 9.31 Suppling And Fixing Of Approved Make Step Type Modular Electronic, Fan Regulator Single/Double Module Including Connection Etc. As Required On Existing Board1 450 Watt , 9.32 Supplying, Erection And Testing Of Approved Make Electric Ceiling Fan Of Double Ball Bearing Complete With Standard Down Rod, Canopy, Hangingshackle, Aluminium Lades, Without Regulator, A.C. 230-250 Volts Including Connections With All Necessary Material Complete As Required Confirming To Is :374/1979 With Upto Date Ammendments. 1 Ceiling Fan (Energy Saver 50 W)-1200 Mm Sweep , 19.1 Supply And Fixing Of Led Tube Rod Comprising Of Led Tube With Non Integral /Integral Driver, 6500K Color Temp Having 40000 Burning Hrs Life Withminimum @ L 70, System Lumen Output Should Be Minimum With Efficacy 80 Lm/W. Led Driver providing fixing 0.95 & Thd 20%. The Colour Rendering Index Ofled Light Should Be More Than 70.Submission Lm 80-08 Form Led Sourcemanufacturer & Lm79-08 / Is16106 From Nabl Approved Lab.Manufacturer Mandatory I/C Connection Wire, Testing Etc.To Complete The Job.2 Yrs Guarantee Ertificate From Manufacturer.19.1.1 1 X 5/8W Integral Tube Fitting Complete , 19.9 Supplying Of Street Light With High Power Led Of 1 To 3 W Each Assembled On Single Mcpcb, System Lumens Output With Efficacy110 Lm/W. Luminiare Having Color Temp 6500K & 50000 Burning Hrs Life With Minimum @ L 70, The Colour Rendering Index Of Led Light Should Be More Than 70. Luminiare Comprises Of Driver, providing fixing 0.95 & Surge Protection 4Kv. Housing Made Of Pressure Die Cast Aluminium With Heat Resistant Flat Glass / Lens Type, Ip66 Protection. Submission Lm 80-08 Form Led Source Manufacturer & Lm79-08 / Is16106 From Nabl Approved Lab. Manufacturer Manadatory I/C 50Mm.Dia G.I. Pipe Bracket Upto 2 Mtr. Long In Required Angle/Shape, Connection Lead, Testing Etc To Complete The Job. 2 Yrs Guarantee Certificate From Manufacturer.19.9.2 40W / 48W , Nail (Hardware Material) , Gi Wire , Welding Rod , Welding Handle , Nut Bold , Brass - 2,4,5,6, , Roller , Sand Material , 4Cutter Blade , 12Cutter Blade , Chainlink Mesh , Angle 35X35x5m , Angle40x40x5m , Ms Pipe 1½, , Ms Pipe 2 , Ms Pipe 3, , Ms Pipe 4, , 2Mm Ms Steel Sheet, , 3Mm Ms Steel Sheet, , Profile Sheet , Screw , Glue Tape , Wood Cutter Chain , Ms Mesh , Ply Board , Cement
Basic Detail
Tender No NO./PWD/2026/3501 DATE 17/11/2026
Bidding Type Tender
Location
City Mandla
State Madhya Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 18 Dec 2026
Open Date 21 Dec 2026
Finance
Tender Value 20 Lakhs
Tender Fee 2000
EMD 20000
Exemption Not Available
Document List
5a1a314c-d92f-4052-9b70-b180122c895d.html
AFFIDAVITCHECKLISTANDOTHER.rar
BOQ_661395.xls
TENDERNOTICE.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 29 days
Dec 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 32 days

Tender Documents

Download All (ZIP) ↓
html

5a1a314c-d92f-4052-9b70-b180122c895d.html

rar

AFFIDAVITCHECKLISTANDOTHER.rar

xls

BOQ_661395.xls

pdf

TENDERNOTICE.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender