Health and Family Welfare Government Departments Closing in 5 days TDR #58570771

Tender For Renovation Of House No. 3791 And 3817 (Type-10), Sector-22, Chandigarh (Total 02 No Houses ) (Ibm Scheme No. W4/2024/22975)(Sub Head: Renovation Of Ph Works In House No. 3817 (Type X), Sector-22, Chandigarh)

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
1 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
2018
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of House No. 3791 And 3817 (Type-10), Sector-22, Chandigarh (Total 02 No Houses ) (Ibm Scheme No. W4/2024/22975)(Sub Head: Renovation Of Ph Works In House No. 3817 (Type X), Sector-22, Chandigarh)

BOQ

Name of Work:- Renovation of House No. 3791 and 3817 (Type-10), Sector-22, Chandigarh (Total 02 No Houses ) (IBM Scheme No. W4/2024/22975)(Sub Head: Renovation of PH Works in House No. 3817 (Type X), Sector-22, Chandigarh)
Sl. No. Item Description
1Excavating trenches of required width for pipes, cables,etc. including excavation for sockets and dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating deposited layer by remming, watering, etc. and disposal of surplus excavated soil as directed, within a lead of 50 m DSR 2.10
2Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia DSR 2.10.1.2
3Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4
4Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1
512 mm cement plaster of mix : DSR 13.4
61:4 (1 cement: 4 coarse sand) DSR 13.4.1
7Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. Low level white vitreous china flushing cistern & C.P flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever required DSR 17.3
8W.C. pan with ISI marked white soild plastic seat and lid cera hirdware DSR 17.3.1
9Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillars taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require: DSR 17.7
10White vitreous china wash basin size 550 x 400 mm with aa pair of 15 mm C.P. brass pillars tap cera hirdware. DSR 17.7.3
11Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,cutting and making good the walls wherever required DSR 17.10
12Kitchen sink without drain board DSR 17.10.2
13610x460mm bowl depth 200 mm DSR 17.10.2.2
14Providing and fixing of C.P. Brass Jet with Brass nossel steel flange & PVC flexible pipe complete in all respect DSR 17.16A
15Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28
1632 mm dia DSR 17.28.2.1
1740 mm dia DSR 17.28.2.2
18Providing and fixing soil, waste and vent pipe DSR 17.35
19100 mm dia DSR 17.35.1
20Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.1.2
2175 mm dia DSR 17.35.2
22Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.2.2
23Providing and fixing collar: DSR 17.57
24100 mm DSR 17.57.1
25Sand cast iron S&S as per IS - 3989 DSR 17.57.1.1
2675 mm DSR 17.57.2
27Sand cast iron S&S as per IS - 3989 DSR 17.57.2.1
28Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Including cost of cutting and making good the walls and floors: DSR 17.60
29100 mm inlet and 75 mm outletSand cast iron S&S as per IS : 3989 DSR 17.60.2
30Providing and laying of concealed G.I. pipe including cost of G.I.specials cutting chase 75mmx50mm & making good the wall and carriage from store to site of work complete in all respect DSR 18.10
3115 mm dia nominal bore DSR 18.10.1
3220 mm dia nominal bore DSR 18.10.2
3332 mm dia nominal bore DSR 18.10.3
34Providing and fixing of Gun-Metal Peat Valve, ISI Marked complete in all respect DSR 18.17A
35size 20mm i/d
36size 15mm i/d (NSR)
37Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18
3815 mm dia. nominal bore DSR 18.18.1
39Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21
4015 mm nominal bore DSR 18.21.2.1
41Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46
4215 mm nominal bore DSR 18.46.1
4320 mm nominal bore DSR 18.46.2
44Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48
45Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 DSR 18.49
4615 mm nominal bore DSR 18.49.1
47Providing and fixing C.P. brass long body bib cock of approved DSR 18.51
4815 mm nominal bore DSR 18.51.1
49Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52
5015 mm nominal bore. DSR 18.52.1
51Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 DSR 18.53
5215 mm nominal bore DSR 18.53.1
53Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A
54Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76
55With F.P.S. bricks DSR 18.76.1
56Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.DSR 18.77
57Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size ( inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. DSR 19.4
58100 x 100 mm size P-type
59With F.P.S. Bricks class designation 75
60Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc.
61Providing& Fixing of drip seal joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter:
62100 mm
6375 mm
64Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make
65Providing and fixing of C.P. brass shower with Arm of approved make
66Prov. & fixing 550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass of approved make
67Providing and fixing of C.P. cup heavy duty of approved make
68Providing and fixing of C.P. brass towel Rail fixed with Ravl Plugs C.p screw of 600 wiking cap at site of approved make
69Providing and fixing of C.P. brass soap dish with C.P screw complete at site of approved make
70Providing and fixing of C.P. brass towel ring comp. at site for WHB of approved make. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58570771
AUTHORITY Government Departments
TENDER VALUE 1 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Public Health Department.
Work Description Tender for Renovation Of House No. 3791 And 3817 (Type-10), Sector-22, Chandigarh (Total 02 No Houses ) (Ibm Scheme No. W4/2024/22975)(Sub Head: Renovation Of Ph Works In House No. 3817 (Type X), Sector-22, Chandigarh)
Basic Detail
Tender No PH3/2026/532
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 1 Lakhs
Tender Fee Ref. Documents
EMD 2018
Exemption Not Available
Document List
69c86e57-b74d-4a47-8e28-23fdee4c5981.html
BOQ_119280.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

69c86e57-b74d-4a47-8e28-23fdee4c5981.html

xls

BOQ_119280.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender