Housing Urban and Rular Development Local Bodies Closing in 5 days TDR #58570764

Tender For Renovation Of Toilets Blocks Of Boys, Girls And Handicap Toilets Alongwith Washing & Drinking Trough In Govt. Model Middle School, Burail, Sector-45, U.T., Chandigarh.

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
36.25 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
72510
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Toilets Blocks Of Boys, Girls And Handicap Toilets Alongwith Washing & Drinking Trough In Govt. Model Middle School, Burail, Sector-45, U.T., Chandigarh.

BOQ

Name of Work:- Renovation of Toilets Blocks of Boys, Girls and Handicap Toilets alongwith Washing & Drinking trough in Govt. Model Middle School, Burail, Sector-45, U.T., Chandigarh.
Sl. No. Item Description
1Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
2All kinds of soil
3Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
4Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
61:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
71:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
8Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
9Centering and shuttering including strutting, propping etc. and removal of form for :
10Suspended floors, roofs, landings, balconies and access platform
11Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
12Thermo-Mechanically Treated bars of grade Fe-500D or more.
13Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
14Cement mortar 1:4 (1 cement : 4 coarse sand)
15Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
16Cement mortar 1:4 (1 cement :4 coarse sand)
17Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
18Granite stone slab colour black, Cherry/Ruby red
19Area of slab over 0.50 sqm
20Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
21Granite Stone of approved shade
22Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)
23Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
24Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
2530 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
26Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
27On both side (2 x 43.28)
28Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
29250x16 mm
30Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
31150x10 mm
32Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
33125 mm
34Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
35Profile B
36Fixing with adjustable lugs with split end tail to each jamb
37Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
38Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
3912 mm cement plaster of mix :
401:4 (1 cement: 4 coarse sand)
41Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
42New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
43Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
44Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
45Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
46Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
47Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
48Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
49Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
50Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
51Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
52Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
53Of area 3 sq. metres and below
54Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
55Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
56Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
57Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
58W.C. pan with ISI marked white solid plastic seat and lid
59Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
60White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
61Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
62Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
63Semi rigid pipe
6432 mm dia
65Providing and fixing soil, waste and vent pipes :
66100 mm dia
67Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
68Providing and fixing heel rest sanitary bend
69100 mm dia
70Sand cast iron S&S as per IS - 3989
71Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
72100x100x100 mm
73Sand cast iron S&S as per IS - 3989
74Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete :
75100 mm
76Sand cast iron S&S as per IS - 3989
77Providing and fixing terminal guard :
78100 mm
79Sand cast iron S&S as per IS - 3989
80Providing and fixing collar:
81100 mm
82Sand cast iron S&S as per IS - 3989
83Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
84100 mm
85Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
86100 mm inlet and 75 mm outlet
87Sand cast iron S&S as per IS - 3989
88Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
89Internal work - Exposed on wall
9025 mm dia nominal bore
91Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
9215 mm dia nominal bore
9320 mm dia nominal bore
94Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
95External work
9625 mm dia nominal bore
97Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
9825 mm nominal bore
9920 mm nominal bore
100Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
10120 mm nominal bore
102Providing and fixing uplasticised PVC connection pipe with brass unions :
10345 cm length
10415 mm nominal bore
105Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
10625 mm diameter pipe
107Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
10815 mm nominal bore
10920 mm nominal bore
11025 mm nominal bore
111Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
112Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
11315 mm nominal bore
114Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
11515 mm nominal bore
116Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
11715mm nominal bore
118Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
119Cutting holes up to 30x30 cm in walls including making good the same:
120With common burnt clay F.P.S. (non modular) bricks
121Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
122Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
123H D - 20
124Circular shape 560 mm internal diameter
125Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
126Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
127With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
128Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
129First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
130Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours
131The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
132Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
133Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
134Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC.
135Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white Vitreous China cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Based on DSR Item No.17.1.1 + 17.19.1)
136White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests
137Providing and Fixing of G.I. Tank Nipple complete in all respect.
13825 mm
139Providing and filling DRY brick blast (32Mm to 50MM size) in depressed portion complete in all respect.
140Dismantling of Wall tiles and scraping the plaster including removing of malba complete in all respect and to the entire satisfaction of EIC.
141Removal of cinder from depressed portion including stacking outside and refilling after drying complete as per site.
142Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. (As desired by EIC)
143Providing and Fixing of C.P. Waste 32/40 mm long thread complete in all respect.
144Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required: (As decided by the EIC)
145Providing and fixing square-mouth C.I. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight SFRC cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (Based on DSR Item No.19.4.1.1)
146100x100 mm size P type
147With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
148Providing and Fixing of Drip Seal Joint complete in all respect.
149100 mm
150Providing and fixing C.P. Brass Towel Ring of approved make complete in all respect. (As decided by the EIC) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58570764
AUTHORITY Local Bodies
TENDER VALUE 36.25 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Chandigarh Administration Engineering Department
Work Description Tender for Renovation Of Toilets Blocks Of Boys, Girls And Handicap Toilets Alongwith Washing & Drinking Trough In Govt. Model Middle School, Burail, Sector-45, U.T., Chandigarh.
Basic Detail
Tender No PH1/2026/512
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 36.25 Lakhs
Tender Fee Ref. Documents
EMD 72510
Exemption Not Available
Document List
3d35cc6f-30ae-48cb-8bc3-8a518affb470.html
BOQ_119288.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

3d35cc6f-30ae-48cb-8bc3-8a518affb470.html

xls

BOQ_119288.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender