Tender For Modification Of The Existing 11 Kv System, Allied Electrical And Associated Works, And Supply And Installation Of 11 Kv Vacuum Contactor Panel For Auxiliary Transformer At Galogi Small Hydro Power Station, Dehradun.
Tender Overview
Project Description
Tender for Modification Of The Existing 11 Kv System, Allied Electrical And Associated Works, And Supply And Installation Of 11 Kv Vacuum Contactor Panel For Auxiliary Transformer At Galogi Small Hydro Power Station, Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule–A : Supply of Main Materials and Equipment |
| 2 | 11 kV, 400 A vacuum contactor-fuse panel for auxiliary transformer, comprising two incomer vacuum contactors and one outgoing transformer-feeder, complete with suitably rated current-limiting HRC fuses for transformer protection, busbar system, overcurrent and earth-fault protection wherever required by the approved protection scheme, metering and control accessories, mechanical and electrical interlocks, indications, protection relays, CTs and PTs of suitable ratio, burden and accuracy class, cable termination chambers, suitable for indoor installation, including internal wiring, mounting hardware, earthing provisions, fuse-monitoring/trip arrangements, all principal equipment accessories and incidental works required for complete and satisfactory operation. Make-ABB / Schneider Electric / CGL /LK Switchgear (Formerly L&T). |
| 3 | 3-core × 70 sq. mm aluminium conductor, 6.35/11 kV (E) grade, XLPE-insulated, screened and armoured HT power cable conforming to IS 7098 (Part 2), latest edition and amendments, including cable identification tags and all principal cable accessories required for installation. Make- KEI / Polycab / Havells |
| 4 | 11 kV (E) indoor-type HT termination kit suitable for 3-core × 70 sq. mm XLPE-insulated aluminium conductor cable, complete with stress-control components and all principal kit components required for termination. |
| 5 | 11 kV (E) outdoor-type HT termination kit suitable for 3-core × 70 sq. mm XLPE-insulated aluminium conductor cable, complete with stress-control components and all principal kit components required for termination. |
| 6 | 3.5-core × 95 sq. mm aluminium conductor, XLPE-insulated, PVC-sheathed, armoured LT power cable conforming to IS 7098 (Part 1), latest edition and amendments, suitable for 1100 V grade, including all principal cable accessories specified for installation and termination. |
| 7 | 25 mm × 3 mm hot-dip galvanized iron earthing strip conforming to the relevant provisions of IS 3043 and applicable standards. |
| 8 | 6-core × 2.5 sq. mm copper conductor, XLPE-insulated, PVC-sheathed, armoured control cable suitable for 1100 V grade, including cable identification tags and all principal cable accessories specified for installation and termination. |
| 9 | MS Trolly for ABB make VCBs of suitable size and dimension. |
| 10 | Schedule–B : Installation, Laying, Modification and Allied Works |
| 11 | Installation, alignment, assembly, internal connection, external cable termination and earthing of the supplied 11 kV, 400 A vacuum contactor panel for the auxiliary transformer, complete with two incomers, one outgoing feeder arrangement, busbar system, protection, metering and control accessories, mechanical and electrical interlocks, indications, relays, CTs, PTs and all associated works. The rate shall include all required glands, lugs, ferrules, insulation sleeves, cable tags, mounting hardware, clamps, supports, fasteners, internal-wiring accessories, consumables, labour, tools, plant and incidental materials required for complete execution. |
| 12 | Laying, dressing, clamping and termination of 3-core × 70 sq. mm, 6.35/11 kV (E) grade XLPE-insulated, screened and armoured HT power cable, including route preparation, cable supports, cable identification, termination at both ends, glands, lugs, ferrules, stress-control materials, sealing materials, jointing materials, consumables and connection to existing/new equipment, complete in all respects. |
| 13 | Installation of 11 kV indoor-type HT termination kits for 3-core × 70 sq. mm XLPE-insulated aluminium conductor cable, including cable-end preparation, fitting of stress-control components, lugs, glands, ferrules, insulation sleeves, sealing materials, consumables and complete termination. |
| 14 | Installation of 11 kV outdoor-type HT termination kits for 3-core × 70 sq. mm XLPE-insulated aluminium conductor cable, including cable-end preparation, fitting of stress-control components, lugs, glands, ferrules, insulation sleeves, sealing materials, consumables and complete termination. |
| 15 | Laying, dressing, clamping and termination of 3.5-core × 95 sq. mm aluminium conductor, XLPE-insulated, PVC-sheathed, armoured LT power cable, including cable glands, aluminium compression lugs, ferrules, cable identification tags, clamps, supports, nuts, bolts, washers, consumables and all associated works. |
| 16 | Installation and connection of 25 mm × 3 mm hot-dip galvanized iron earthing strip, including cutting, bending, jointing, fixing, clamps, saddles, nuts, bolts, washers, spacers, connection to equipment and earth grid, treatment of joints, consumables and continuity verification. |
| 17 | Construction of cable trench by cutting and breaking the existing cement-concrete floor, excavation to the required dimensions, dressing and finishing of trench sides with cement mortar, including supply, fabrication and fixing of MS angle-iron frames on both sides and supply, placement and fixing of suitable MS chequered-plate covers, complete with cutting, welding, fastening, painting, restoration of the surrounding floor, transportation, labour, tools, plant, consumables and all incidental materials. |
| 18 | Laying, dressing, clamping and termination of 6-core × 2.5 sq. mm copper conductor, XLPE-insulated, PVC-sheathed, armoured control cable on cable trays, in trenches or ducts, including suitable cable glands, tinned-copper lugs, ferrules, insulation sleeves, cable identification tags, clamps, supports, nuts, bolts, washers, consumables and all associated works for the 11 kV auxiliary-transformer panel and system-modification works. |
| 19 | Dismantling, shifting, retrofitting and reinstallation of existing aux. transformer feeder energy meters in the new auxiliary-transformer changeover panel, including modification of internal wiring, terminal connections, ferruling, cable identification, lugs, ferrules, consumables and all associated works. |
| 20 | Modification of the existing Unit-3 11 kV incomer feeder for use as the 11 kV Barlowganj–Mussoorie feeder, including shifting of the existing 3-core × 185 sq. mm 11 kV cable and 300/5 A and 50/5 A CTs, dismantling, reinstallation, termination and all associated works. The rate shall include all labour, tools, plant, transportation, consumables, sundry materials, glands, lugs, ferrules, sleeves, tags, clamps, supports, fasteners, jointing materials and other incidental items required for complete execution. |
| 21 | Modification of the existing 11 kV Anarwala–Dehradun feeder for use as a bus-coupler feeder, including installation of required busbars, dismantling and reinstallation of CTs, PTs, meters and protection relays, fabrication and installation of a new powder-coated front door matching the existing switchgear, disconnection of the outgoing cable, control-wiring modification and all associated works. The rate shall include all labour, tools, plant, transportation, consumables, sundry materials, fasteners, wiring accessories and incidental items required for complete execution. |
| 22 | Modification of the existing 11 kV Barlowganj–Mussoorie feeder for use as the Anarwala–Dehradun feeder, including shifting and termination of the existing 3-core × 185 sq. mm 11 kV cable and energy meters, change of feeder identification and all associated works. Existing CTs, PTs, meters and protection relays shall be retained. The rate shall include all labour, tools, plant, transportation, consumables, sundry materials, glands, lugs, ferrules, sleeves, tags, clamps, supports, fasteners, jointing materials and other incidental items required for complete execution. |
| 23 | Modification of the existing 11 kV auxiliary-transformer feeder for use as the Unit-3 11 kV incomer feeder, including shifting and termination of the existing 3-core × 185 sq. mm incoming cable, shifting and reinstallation of existing meters and protection relays, change of feeder identification and all associated works. Existing CTs and PTs shall be retained. The rate shall include all labour, tools, plant, transportation, consumables, sundry materials, glands, lugs, ferrules, sleeves, tags, clamps, supports, fasteners, jointing materials and other incidental items required for complete execution. |
| 24 | Modification of Unit-3 control-cable connections by rerouting and reconnecting existing control cables to the modified auxiliary-transformer feeder, including control-wiring modifications, termination, ferruling and all associated works. No new control cable shall be supplied under this item. The rate shall include all labour, tools, plant, transportation, consumables, sundry materials, wiring accessories, ferrules, sleeves, tags, fasteners and other incidental items required for complete execution. |
| 25 | Schedule–C : Testing and Commissioning |
| 26 | Complete testing and commissioning of the supplied 11 kV panel and modified 11 kV system, including insulation-resistance tests, contact-resistance tests, HT-cable testing, CT and PT testing, relay testing and calibration, metering checks, interlock verification, functional checks, protection-tripping checks, phase-sequence verification, control-circuit checks, bus-coupler operation checks, auxiliary-transformer changeover checks, energization and trial operation, wherever applicable. The item shall also include preparation and submission of detailed test reports, relay-setting records, cable-test reports, commissioning reports and as-built drawings/schematics, complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender