Tender For Improvement & Augmentation Of Lift Irrigation Scheme Tihri, Bakain, Ree Randoh In Tehsil Jhandutta Distt. Bilapsur H.P (Sh:- Providing And Errection Of Centrifugal Pumping Machinery For 1St Stage To Vill Randoh )
Tender Overview
Project Description
Tender for Improvement & Augmentation Of Lift Irrigation Scheme Tihri, Bakain, Ree Randoh In Tehsil Jhandutta Distt. Bilapsur H.P (Sh:- Providing And Errection Of Centrifugal Pumping Machinery For 1St Stage To Vill Randoh )
BOQ
| Sl. No. | Item Description |
| 1 | Providing & Installation of horizontal spindle horizontal split casing / end suctions (back pull out arrangement ) single /double/multistage centrifugal pump or combination of pump in series of Mather and Platt/KSB/Kirloskar/Jyoti/Beaconweir / BS & BE as per BIS-1520-1980 with up to date amendments, read with IS:9137-1978 or latest edition suitable for lifting clear water . The pump should be fitted with bronze impellers , priming funnels , casing rings, shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on MS/ Cast steel base plate ( base plate to be provided from the manufacturer,s of the pumping unit only) to slippering type drip proof induction motor of BHEL/Kirloskar/Crompton/NGEF/Siemen/Jyoti/GEC confirming to BIS 9238-1979 latest with up to date amendments and suitable for operation on 400 (+/-) 10% volts, 50 cycles / second, three phase AC electric supply. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of + 10% and - 15% of the duty point head. The motor should be as per IS 325-1978 with up to date amendments.The pump set should suitable for operation on data given below:- Discharge:- 10.54 LPS per set, Total dynamic head :- 65.20 metre, LWL in sump well :- 538.45 metre, Shaft level:- 538.45 metre , Level at discharge point :- 598.00 metre , Residual head:- 3 metres, Static head:- 59.55 metre , Dia of Rising Main:- 150 mm , Length of Rising Main:- 425 Rmt, Pumping Hours:- 20 hours, Coupling and base plate :- 2 sets, Turbidity :- less than 50 NTU, Temprature 20 degree to 42 degree centigrade. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender