Tender For Restoration Of Rain Damages To Lwss Koon Dayol (Sh:- Providing Laying Jointing And Testing Of 20 Mm Dia Pipe And Protection Of Storage Tank) Under Pdna
Tender Value
2.74 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
9 days left
EMD
5490
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Koon Dayol (Sh:- Providing Laying Jointing And Testing Of 20 Mm Dia Pipe And Protection Of Storage Tank) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Providing Laying,jointing and testing 3-Layer PPR (Polypropylene Random copolymer) pipes UV stabilzed and antimicrobial fusion welded having thermal stabilty for hot & cold water supply including all PPR plain and brass threaded polypropylene random fitting complete in all respect within all leads and lifts as per the direction of the Engineer-in-Charge. |
| 2 | 20 mm nominal bore. (PN 16/SDR 7.4)-3 Layer |
| 3 | Steel work welded in builtup section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting grating, framed guard bars ladders, railing brackets and similar works as per direction of Engineer-in-Charge upto all lead and lift. |
| 4 | wovenplains G.I wire fencing of mesh 50mm to 150 mm to any type of standard rails, strainging boets, etc.including provision of binding wire, staples etc. thick corresponding to (SWG-6) of 15x15 cm mesh. |
| 5 | Applying priming coat over new steel and other metal surfaces after & including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With readymixed priming paint, brushing red lead, Red-oxide/zinc oxide chrome. |
| 6 | Painting two coats(excluding priming coat) on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. |
| 7 | Excavation in foundations, trenches etc., in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each depositrd layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect as per entire satisfaction of Engineer in Charge. |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 9 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 10 | Providing and laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40mm nominal size) with 15% Plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually by 150mm to 300mm as per HPPWD specification as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 11 | Stone soling/Boulder filling dry hand packed under floor/ behind retaining wall as per direction and to the entire satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender