Public Administrative Department Local Bodies Closing in 6 days TDR #58569194

Tender For Repairing Of Damaged Ceiling By Guniting Method With Other Ancillary Work At Market Engineering Cell,Room No. 328, 3Rd Floor Of Cmo Buildings

Issued by Local Bodies · Kolkata, West Bengal
Tender Value
4.62 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
9500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairing Of Damaged Ceiling By Guniting Method With Other Ancillary Work At Market Engineering Cell,Room No. 328, 3Rd Floor Of Cmo Buildings

BOQ

Name of Work:- REPAIRING OF DAMAGED CEILING BY GUNITING METHOD WITH OTHER ANCILLARY WORK AT MARKET ENGINEERING CELL,ROOM NO. 328, 3RD FLOOR OF CMO BUILDINGS
Sl. No. Item Description
1BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 10. Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
2BUILDING WORKS ( C ) Brickworks,Concrete Works etc..C. REPAIR AND REHABILITATION WORKS?Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.
3BUILDING WORKS ( C ) Brickworks,Concrete Works etc..C. REPAIR AND REHABILITATION WORKS?Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment]
4REPAIR AND REHABILITATION 16.(3)Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification.
5BUILDING WORKS (G) WOOD AND PVC WORKS C. MISCELLANEOUS WOODWORK 10. Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor. (b) 25mm mesh (For upper floors refer to item H(4) also)
6SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](iii) With 1:3 cement mortar (c) 10 mm thick plaster (3rd Corrigenda & addenda dated 04.06.2018)
7SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER B. MISCELLANEOUS ITEMS 5 (a)Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
8SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 7 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat ii) Solvent based interior grade Acrylic Primer.[This item to be done under specific instruction of the Superintending Engineer]
9SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats
10SECTION 1. ------------BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
11BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
12BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height
13BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height
14BUILDING WORKS (G) WOOD AND PVC WORKS G. WALL PANELLING 13.Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge. In Ground Floor (A) Plain :(b) Interior grade. (ii) 8mm. For upper floors refer to item H(4) for items 13, 14, 15, 16 under subhead G
15BUILDING WORKS(R) ALUMINIUM WORKS??(17)Supplying, fitting& fixing of Aluminium fixed partion wall of all aluminium sections viztop, bottom and side member, intermediate member, glazing clipmade of Aluminium Alloy Extrusions conforming to IS: 733-1983 andIS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with allother accessories viz. EPDM gusket,cleat, angle screws etc. includinglabour charges for fitting and fixing of aluminium fixed partition wallwith glass / panel board all complete as per architectural drawingsand direction of Engineer-in-charge. (Excluding cost of glass/ panelboard, 10-12 Micron thickness Annodizing film. Natural white. b) Forunsupported length of vertical member above 1.50m. height of bothends of vertical member restrained but panel above 0.90 sqm.(unit wtof Top, bottom & side member @ 1.978; intermediate member @2.055; glazing clip @ 0.167 kg/m respectively) [Note : for estimatepurpose construction wing may consider weight of Al-Sections forPartition wall @ 5.0 Kg per Sq.M][Mode of Measurement:for SL No. 15 to 17 Payment will be made onthe basis of actual weight of Aluminium Composit section based on relevant specification]
16MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 3)Mazdoor (Male). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages.
17MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 4)Mazdoor (Female). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages.
18MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 6)Carpenter (Ordinary). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages.
19Sub Total
20GST 18%
21CESS 1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58569194
AUTHORITY Local Bodies
TENDER VALUE 4.62 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Kolkata Municipal Corporation
Work Description Tender for Repairing Of Damaged Ceiling By Guniting Method With Other Ancillary Work At Market Engineering Cell,Room No. 328, 3Rd Floor Of Cmo Buildings
Basic Detail
Tender No KMC/DG(C)/EEC/HQ/26-27
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 17 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 4.62 Lakhs
Tender Fee Ref. Documents
EMD 9500
Exemption Not Available
Document List
649882de-fbb5-4c01-82cc-476f61e51a00.html
BOQ_2568559.xls
C1.pdf
form_55.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

649882de-fbb5-4c01-82cc-476f61e51a00.html

xls

BOQ_2568559.xls

pdf

C1.pdf

pdf

form_55.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender