Tender For Replacement Of Terracotta Wall Tiles And Retrofitting In Dgre Plot No 01 & 02 Sector-37A, Chandigarh
Tender Value
31.95 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
63900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Terracotta Wall Tiles And Retrofitting In Dgre Plot No 01 & 02 Sector-37A, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall tile(terracota tiles) including cement mortar bedding (at any height) and removing the rubbish off the premises/MoD land complete all as specified and directed. |
| 2 | Material and labour for rendering surfaces 15mm thick in CM (1:4) using WPC @ 3% by weight of cement finished even and smooth including necessary scaffolding and other safety measures at any height complete all as specified and directed. Note: WPC shall be measured and paid for separately |
| 3 | Supply only liquid waterproofing compound complete all as specified and directed. |
| 4 | Material and labour for forming V grooves in plaster exc n 10mm deep and n exc 10mm on faces to match with existing pattern (size and shape) complete all as specified and directed. |
| 5 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. The paint shall be applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 6 | Material and labour for chipping of unsound/weak concrete material upto 75mm average thickness from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as specified and directed. |
| 7 | Material and labour for cleaning of reinforcement bars upto 12mm dia bars from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed. |
| 8 | Material and labour for providing, mixing and applying SBR polymer (of approved make) modified cement mortar (inclusive of cement mortar) 15MM in proportion of 1: 4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) complete all as specified and directed.. |
| 9 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 10 | Supply and fixing for refixing PVC (SWR) pipes any dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 11 | Supply and fixing for stack clamps out of 50 mm by 5 mm flat iron any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in truss and similar framed work complete all as specified and directed. |
| 14 | Supply and fixing pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavy brackets framing (Beam tee, angle, square, rectangular hollow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed. |
| 16 | Material and labour for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender