Tender For Constructing 11Kv/Lt Oh Line At Elavaramkuzhi To Kettuplachi -Cw-4677-202627-10- Under Electrical Section Karavaloor Under Electrical Division Punalur
Tender Value
5.35 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
8 days left
EMD
13400
Bank guarantee accepted
Document Fee
1298
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructing 11Kv/Lt Oh Line At Elavaramkuzhi To Kettuplachi -Cw-4677-202627-10- Under Electrical Section Karavaloor Under Electrical Division Punalur
BOQ
| Sl. No. | Item Description |
| 1 | Providing one Coil Earth using No.8 GI earth wire ( 50mm dia, 115 turns), digging separate pit(0.45x0.45x1.5m) at standard distance away from the pole/ structure in ordinary soil & back filling |
| 2 | Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length incl. digging separate pit ( 0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & back filling. |
| 3 | Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading charges |
| 4 | Additional rate for providing one disc set, PG clamp etc. on any type of HT pole for making cut point |
| 5 | Fitting and erecting one HT Double Pole structure using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing ( excluding provision for earthing) |
| 6 | Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole incl. conveyance of materials |
| 7 | Fitting one Additional V cross arm in existing single pole incl. conveyance of materials |
| 8 | Fitting and erecting one HT PSC type pole in position incl. fitting cross arm, digging & back filling pit in ordinary soil (as per standards),drawing suffficient length of GI earthing leads from F clamp through V cross arm to the ground fro earthing ( excluding provision for earthing) |
| 9 | Labour charges for Loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 10 | Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit in ordinary soil |
| 11 | Stringing of one km 3ph 11KV line with XLPE insulated ACSR Racoon or equivalent ( 3 conductors ) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps incl. cutting and removing tree branches wherever necessary excluding cut point works. |
| 12 | Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing. |
| 13 | Drilling hole of various sizes on existing Channel/Cross arm |
| 14 | Fitting and providing one strut using HT PSC pole incl. digging and back filling pit in ordinary soil |
| 15 | Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires. |
| 16 | Disconnecting and lowering down the Sph WP service connection with guy wire from the OH line and reconnecting the same after completing the line work. |
| 17 | Fitting one set (3No.s) 11KV LA and giving connections excluding earthing |
| 18 | Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same |
| 19 | Transferring LT single phase 2/3 wire OH line to newly errected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete. |
| 20 | Transferring LT single phase 4/5 wire OH line to newly errected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete. |
| 21 | Redoing single phase WP service connection complete including lowering down the guy wire portion, repairing or changing WP wire, GI wire, fuse unit etc.,changing energy meter cutout, neutral link etc., if necessary and reconnecting the same including conveyance of materials to site from section office at various location. |
| 22 | Dismantling one 2x40W flourescent tube fitting from the existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires. |
| 23 | Pole numbering using printed aluminium sheets of 22SWG having size 20x12cm or painting the surface of line supports where numbers are to be inscribed, pole numbers shall be painted in circular/rectangular background, using approved quality anti algal yellow paint in two coat after scrapping and cleaning the surface at a height of 2.5m above ground level. the number and letter should be in black synthetic enamel paint. The size of number should be atleast 2cm in height and 1.5cm in width including cost of paint. |
| 24 | Dismantling( without damage) LT stay incl. digging pit in all classes of soil and back filling |
| 25 | Fitting one additional 2.4m/3m channel cross arm ) 100x50x6mm) in existing 11kV DP including conveyance of materials Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender