Public Administrative Department Local Bodies Closing in 5 days TDR #58568317

Tender For Stringing Of Overhead Unarmoured Cable And Installation Of 150Watt. Street Light Fittings In The Existing Octagonal Poles On Sani Mandir Road At Civil Township, Raurkela.

Issued by Local Bodies · Sundargarh, Odisha
Tender Value
11.43 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
11430
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Stringing Of Overhead Unarmoured Cable And Installation Of 150Watt. Street Light Fittings In The Existing Octagonal Poles On Sani Mandir Road At Civil Township, Raurkela.

BOQ

Name of Work:- Stringing of Overhead unarmoured Cable and Installation of 150Watt. Street Light Fittings in the existing Octagonal Poles on Sani Mandir Road at Civil Township, Raurkela.
Sl. No. Item Description
1Supply & Installation of 150W (±5%) LED Street light with batwing spread in grey corrosion free powder coated Aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK07 (impact resistance) heat resistance toughened glass with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with a LED Chip level efficacy of at least ≥155 lumens per watt and a system efficacy ≥125 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification etc. complete as per direction of the Engineer-in-Charge. (Make : Bajaj / Crompton / Philips / Havells/ Jaquar or equivalent make with LED fixture that has been approved by ISO & BIS in corporate the LM 79 & LM 80)
2Supply and fixing of 2.5 Sq.mm. Aluminium Service wire for power supply from FRP pole junction box to 150 Watt. Street light Fitting as per direction of the Engineer- in- charge.
3Pole junction box / looping / terminal box : Each pole shall have a weather proof pole junction/looping/terminal box clamped at 450 mm from top of the pole. Project SPV to Supply and Install FRP pole junction box including clamps, bolts, GI/painting, glands, DIN rail terminals, insulation, locking arrangement and for providing connection to incomer cable and outgoing wire. To be provided with a suitable busbar arrangement to loop 2 to 3 cables of size up to 25 Sq.mm. 10A MCB and bi-metallic connectors to be provided in each junction box for supply to LED Luminaires.
4Supply and stringing of 2 core x 16 sq mm XLPE insulated unarmoured aluminium Cable for power supply from 3 phase outdoor stand mounted Panel Board to each Octagonal Pole for power supply to each Street Light Fitting including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. (Make - Havells / Nicco / Finolex / KEI / Polycab / Gloster)
5Supply, fitting and fixing of galvanised 'D' iron clamp complete with CI knob for holding the over head supply cable of size 4 core x 16 sq mm XLPE insulated unarmoured aluminium Cable to be stringing at pole to pole including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge.
6Supply and stringing of aluminium alloy messenger wire of size 25 sq.mm to support for stringing of the over head supply cable of size 4 core x 16 sq mm XLPE insulated unarmoured aluminium Cable at pole to pole including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineer-in-charge.
7Supply of 9 mtr long hot dip galvanized swaged type Steel Tubular Pole with MS base plate 300x300x6mm and having pole dimension Bottom:- 139.7 OD x 5.40mm x 5 mtr long, Middle : 114.3 OD x 4.85mm Thickness x 2 mtr long, Top : 88.9 OD x 3.25mm Thickness x 2 mtr long as per the direction of the Engineer-in-Charge.
8Providing and laying un-reinforced plain cement concrete pavement with 43 grade cement with M-20 grade mix with 20mm and downgraded screened washed hard black crusher broken granite chips including hoisting, lowering, laying, watering, curring etc. complete as per direction of the Engineer-in-Charge. Upto ground level : 1 x 3’-0” x 3’-0” x 3’-0” = 27.00cft.Couping portion : 1 x 1’-6” x 1’-6” x 1’-6” = 03.37cft. = 30.37cft.(-) Volume of pole up to top of couping :3.14 x (0'-5½\\")² / 4 x 4'-6\\" = (-) 0.71 cft. = 29.66cft.Or Say 0.83 Cum per each
9Supply of all materials, labour, T&P and transportation for centering and shultering of the couping portion etc. complete as per direction of the Engineer-in-Charge. 4 x 1’-6” x 1’-6” = 9 sq.ft. Or say 0.83 sqm per each
10Providing and fixing of spike earthing with GI Flat in each pole with nut & bolt and arrangement in the pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.
11Supply and stringing of size 3.5 core x 25 sq.mm XLPE insulated armoured aluminium Cable for power supply from LT Pole to 3 phase outdoor stand mounted Panel Board including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. (Make - Havells / Nicco / Finolex / KEI / Polycab / Gloster).
12Supply and fixing of Single Phase outdoor type Panel Board with double door locking arrangement made of 16 SWG C.R sheet of size 2'-0\\" x 1'-6\\" x 1'-0\\" and painting with 2 coats of approved paints i. e. D.A.grey with foundation of size 3'-0\\" x 1'-6\\" x 1'-0\\". The Panel Board consisting of the following accessories.(i) 100 Amp. Kit Kat - 2 nos. (Make-Anchor/ HPL/ Havells/ L&T),(ii) 63 Amp. 2 pole \\"C\\" series MCB - 1 no,(iii) 40 Amp. 2 pole NHD Series Contactor – 1 no.(iv) Timer - 1 no(iii) Indicator Lamp - 1 no.,(iv) Danger Board - 1 no.,with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the Engineer- in- charge.
13G.I. earth pipe electrode with salt and charcoals: Earthing with GI earth pipe 4.5 Mtrs. long 40mm dia of ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required as per the direction of the Engineer-in-Charge. (with Charcoal and salt)
14Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58568317
AUTHORITY Local Bodies
TENDER VALUE 11.43 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Municipal Corporation
Work Description Tender for Stringing Of Overhead Unarmoured Cable And Installation Of 150Watt. Street Light Fittings In The Existing Octagonal Poles On Sani Mandir Road At Civil Township, Raurkela.
Basic Detail
Tender No MC/RMC/68/2026
Bidding Type Tender
Location
City Sundargarh
State Odisha
Key Dates
Publish Date 17 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 11.43 Lakhs
Tender Fee 6000
EMD 11430
Exemption Available
Document List
9eb423a1-9ea9-4b30-80c6-d696c3333586.html
BOQ_621652.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

9eb423a1-9ea9-4b30-80c6-d696c3333586.html

xls

BOQ_621652.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender