Tender For Constructing 11 Kv Line Using Covered Conductor From Thevarthottam To Erappanpara And Installing Dtr (Cw-4592-202627-59) Of Electrical Section Valakom Under Electrical Division Kottarakkara
Tender Value
5.12 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
8 days left
EMD
12900
Bank guarantee accepted
Document Fee
1298
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructing 11 Kv Line Using Covered Conductor From Thevarthottam To Erappanpara And Installing Dtr (Cw-4592-202627-59) Of Electrical Section Valakom Under Electrical Division Kottarakkara
BOQ
| Sl. No. | Item Description |
| 1 | Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/ structure &back filling |
| 2 | Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & back filling. |
| 3 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11KV DP incl. conveyance of materials. |
| 4 | Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading |
| 5 | Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil. |
| 6 | Dismantling one ordinary street light /CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting |
| 7 | Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing). |
| 8 | Erecting one 100kVA Transformer to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting ransformer. |
| 9 | Transporting Transformers by hired vehicle to a distance upto 5km and carrying upto 2 numbers of 3/100/160/250kVA Transformers/ Ring Main Units excluding loading&unloading charges. |
| 10 | Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 11 | Fitting and erecting one HT 'A' type SinglePole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 12 | Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 13 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 14 | Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit |
| 15 | Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalant (3 conductors) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works. |
| 16 | Fitting one set AB switch on existing DP,giving connection and drawing sufficientlength of GI earthing leads to the ground forearthing, excluding provision of earthing. |
| 17 | Drilling hole of various sizes on existing Channel/Cross arm |
| 18 | Additional rate for excavation of Pit for A type pole in Laterite |
| 19 | Fitting 6 channel cross arms, AB switch, DO fuse, Station class LA, HT & LT connections upto OH lines, etc. on existing DP structure, Fixing distribution box/provision for one set (3No.) of LT fuses, drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing & mounting of Transformer on poles. |
| 20 | Installing one DTR Meter with box (normalsize 40x25x100cm) on existing polesincluding fixing of 3 CTs on bus bar, laying and termination of control cable using proper lugs, fixing of meters, capacitors, control fuses and giving the complete connections including conveyance of materials. |
| 21 | Providing bridging at cut points for 3 PH 11 kV line with XLPE insulated ACSR Racoon |
| 22 | Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion |
| 23 | Providing Transformer fencing to a height of 1.8 m above ground level using MS Angle frames of size ISA 50x50x6mm for outer frame, 2 runs of 40 x 6 MS flat for horizontal bracing and grills with MS rods 8 mm Dia @ 10cm c/c for verticals, providing gate with locking arrangements, providing danger board & name board, embeding the legs in cement concrete 1:2:4, footing of size 30cmx30cmx50cm, painting with synthetic enamel paint two coats over one coat of iron primer etc complete, incl cost of transportation |
| 24 | Cleaning and levelling of transformeryard/RMU, spreading 40 mm broken stone in yard for a thickness of 10 cm above bed of 10 cm thick 6 mm broken stone, after constructing a curb wall of height 20cm above ground and 10cm below level including cost of all materials and charges for conveying, spreading, consolidating etc. |
| 25 | Dismantling (without damage) one LTPSC/RCC Strut pole including removal ofclamps and stacking. |
| 26 | Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work. |
| 27 | Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole |
| 28 | Additional rate for providing one disc set on any type of HT pole for making cut point |
| 29 | Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut, etc. and stacking the same |
| 30 | Cutting trees beyond 30 cm but upto and incl 60 cm girth cutting of trunks,branches,removing the root completely and stacking |
| 31 | Cutting trees beyond 60 cm but upto and incl 120 cm girth cutting of trunks,branches,removing the root completely and stacking |
| 32 | Conveyance of one km 11 kV line materials from section store/stacking placeto the work site (excluding poles) |
| 33 | Transferring LT 3 ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole |
| 34 | Transferring LT 3 ph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole |
| 35 | Additional rate for excavation of one Pit for HT pole/ HT stay in laterite Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender