Power Government Departments Closing in 6 days TDR #58567251

Tender For Tender For Shifting Of Existing 22/0.4Kv, 63Kva S/Stn At Bara Kamba Along With Its Associated Lines Due To Dense Population/Inhabitant In Village Bara Kamba To A Safer Place In Electrical Section Nigulsari, Under Electrical Sub-Division, H

Issued by Government Departments · Kinnaur, Himachal Pradesh
Tender Value
2.60 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
6 days left
EMD
6515
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Tender For Shifting Of Existing 22/0.4Kv, 63Kva S/Stn At Bara Kamba Along With Its Associated Lines Due To Dense Population/Inhabitant In Village Bara Kamba To A Safer Place In Electrical Section Nigulsari, Under Electrical Sub-Division, Hsebl, Bhabanagar.

BOQ

Name of Work:- Tender for shifting of existing 22/0.4KV, 63KVA S/stn at Bara Kamba along with its associated lines due to dense population/inhabitant in village Bara Kamba to a safer place in Electrical Section Nigulsari, under Electrical Sub-Division, HSEBL, Bhabanagar.
Sl. No. Item Description
1Dismentalement Charges of 22kV HT line.
2Dismentalement charges of ST poles S/Pole Str. (with complete accessories.)
3De-sagging of ACSR conductor 6/1/3.35mm. (Removal of conductor & De stringing only)
4ERRECTION OF 22KV H.T LINE
5(i) Digging of pit, (ii) Erection of pole, Laying and concreting of RCC muff (iii) filling of pit & Ramming (iv) Drilling of holes in X-arms (v) fixing of insulator, X-arm, knee-bracing set, top clamp (vi) fixing of Barbed wire, Danger plate (vii) painting of pole S/Pole str. (Complete in all respect).
6ERRECTION OF STAY SET
7(i) Digging of pit (ii)fixing of stay rod (iii) Filling of pit (iv)Nozzeling & Tighting.
8Sagging of ACSR Conductor 6/1/3.35mm (Single wire).
9Laying of conductor (i) stringing & sagging (ii) binding with insulator.
10MANNUAL CARRIAGE OF H.T LINE MATERIAL CONSIDERING AVERAGE DISTANCE 0.200 K.M.
11Erection of 63KVA S/Stn.
12Digging of pit for pole and earthing, drilling of holes in x-arm, preparation of plate form, Str. Member C.I A.I. X-arm, knee bracing set, erection of D-pole, c.c.muff, erection of plate form, erection of x-arm, dropout fuse unit, lightning arrester, MCCB switch, L.T box, energy meter, erection of transformer, G.O switch, stay set, jumper earthing 3 sets, L.T cables, painting etc. (Complete in all respect).
13Mannual carriage of sub-station material for an average distance of 0.200Km.
14Providing Fencing around the Sub-station.
15Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil
16Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:4:3 (1 Cement: 4 coarse sand): 5 graded stone aggregate 40 num nominal size)
17Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 11.5.3 (1 cement: 1.5 coarse sand) 3 graded stone aggregate 20 mm nominal size)
18Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
19Providing and fixing G1 chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of GI wire of dia 4 mm
20Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x35x1.90 mm
21Providing and fixing 151 marked oxidised M5. sliding door bolts with nuts and screws etc. complete 250-16 mm
22MATERIAL TO BE SUPPLIED BY CONTRACTOR (Subject to the non-availability of material at Divisional Store).
23HT line
24Prov. RCC Muffs (2000mm) with concrete filling.
25Prov. 22kV Pin Insulators with GI Pin (Porcelain,36kV, 10KN)
26Prov. Disc Insulator Set (including Dead end clamp,Ballcleaves eye sockets, straight stapple & Bend Stapple etc.) Inluding Dead End Clamps etc.)
27Prov. stay Wire (7/3.15mm)
28Prov. Nuts & bolts. (off soze)
29Prov. Aluminium paint.
30Prov. support clamp
31Prov. Egg Insulator.
32Prov. Stay Set HT (i/c stay clamp)
33Sub Station
34Prov.RCC Muffs (2000mm) with concrete filling.
35Transformer LT Distribution Box and GO Switch fixing Assembly.
36Prov.MS Angle Iron (50x50x6mm) Length : (2800mm) x 2 Nos.
37Prov.MS Angle Iron (50x50x6mm) Length : (450mm) x 1Nos.
38Prov.GO Switch Handle Supporting :[ Channel Iron (75x40x5mm), Length : 460mm.
39Prov.GO AB Switch Unit (11KV, 400A, 25KA)Tripple pole O/D Type
40Prov.DO Fuse Unit
41Prov.Surge Arrester, 9KV Station Class (Procelain Type)
42Prov.Prov. Disc Insulator Set (including Dead end clamp,Ballcleaves eye sockets, straight stapple & Bend Stapple etc.) Inluding Dead End Clamps etc.)
43Prov. Stay Set HT (i/c stay clamp)
44Prov.Stay Wire (7/3.15mm)
45Pipe Earthingset
46Prov. GI wire (6SWG) for earthing.
47Prov.Half Clamp (MS Flat 50x6mm)
48Prov.Full Clamps (MS Flat 50x6mm)
49Prov.Nuts and Bolts of various sizes (Galvanised / coated) [Preferably 16 mmØ or more (with flat and spring washers)]
50Prov.Aluminium Thimble
51Prov.Cu Thimble 200Amp.
52Prov.Barbed Wire
53Prov.Aluminim Paint Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58567251
AUTHORITY Government Departments
TENDER VALUE 2.60 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Himachal Pradesh State Electricity Board
Work Description Tender for Tender For Shifting Of Existing 22/0.4Kv, 63Kva S/Stn At Bara Kamba Along With Its Associated Lines Due To Dense Population/Inhabitant In Village Bara Kamba To A Safer Place In Electrical Section Nigulsari, Under Electrical Sub-Division, Hsebl, Bhabanagar.
Basic Detail
Tender No RPO/ED/DB-11/2026-27/34
Bidding Type Tender
Location
City Kinnaur
State Himachal Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 2.60 Lakhs
Tender Fee 590
EMD 6515
Exemption Not Available
Document List
99fad728-25d6-4947-8b2f-359f3a97e897.html
BOQ_221341.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

99fad728-25d6-4947-8b2f-359f3a97e897.html

xls

BOQ_221341.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender