Tender For Tender For Providing Sop To Sewerage Treatment Plant At Chitkul By Providing 22/0.4Kv, 63Kva S/Stn. Along With Its Associated Lines In Electrical Section Rakcham Under Electrical Sub-Division, Hpsebl, Sangla.
Tender Value
3.35 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
6 days left
EMD
8375
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Providing Sop To Sewerage Treatment Plant At Chitkul By Providing 22/0.4Kv, 63Kva S/Stn. Along With Its Associated Lines In Electrical Section Rakcham Under Electrical Sub-Division, Hpsebl, Sangla.
BOQ
| Sl. No. | Item Description |
| 1 | ERRECTION OF 22KV H.T LINE |
| 2 | (i) Digging of pit, (ii) Drilling of holes in X-bracing set, X-arms (iii) Erection of pole, Laying and concreting of RCC muff (iv) fixing of insulator, X-arm, X-bracing set, (vi) fixing of Barbed wire, Danger plate (vii) filling of pit & Ramming (viii) painting of pole D/Pole str. (Complete in all respect). |
| 3 | ERRECTION OF STAY SET |
| 4 | (i) Digging of pit (ii)fixing of stay rod (iii) Filling of pit (iv)Nozzeling & Tighting. |
| 5 | ERRECTION OF EARTHING |
| 6 | (i) Digging of pit (ii) fixing of G.I wire to the earth system, filling of pit. |
| 7 | Sagging of ACSR Conductor 6/1/3.35mm (Single wire). |
| 8 | Laying of conductor (i) stringing & sagging (ii) binding with insulator. |
| 9 | Sagging of G.I Wire for earth wire |
| 10 | MANNUAL CARRIAGE OF H.T LINE MATERIAL CONSIDERING AVERAGE DISTANCE 0.500 K.M. |
| 11 | Erection of 63KVA S/Stn. |
| 12 | Digging of pit for pole and earthing, drilling of holes in x-arm, preparation of plate form, Str. Member C.I A.I. X-arm, knee bracing set, erection of D-pole, c.c.muff, erection of plate form, erection of x-arm, dropout fuse unit, lightning arrester, MCCB switch, L.T box, energy meter, erection of transformer, G.O switch, stay set, jumper earthing 3 sets, L.T cables, painting etc. (Complete in all respect). |
| 13 | Mannual carriage of sub-station material for an average distance of 0.500Km. |
| 14 | Providing Fencing around the Sub-station. |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:4:3 (1 Cement: 4 coarse sand): 5 graded stone aggregate 40 num nominal size) |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 11.5.3 (1 cement: 1.5 coarse sand) 3 graded stone aggregate 20 mm nominal size) |
| 18 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 19 | Providing and fixing G1 chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of GI wire of dia 4 mm |
| 20 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x35x1.90 mm |
| 21 | Providing and fixing 151 marked oxidised M5. sliding door bolts with nuts and screws etc. complete 250-16 mm |
| 22 | ERRECTION OF L.T LINE. |
| 23 | (i) Digging of pit, Laying of RCC muff,Drilling of holes in poles. Erection of pole,Erection of shackle insulator, filing of pit and ramming, Painting of pole. (Complete in all respect). |
| 24 | ERRECTION OF STAY SET |
| 25 | Digging of pit, fixing of stay rod, filling of pit, Nozzeling & Tighting.) Complete in all respect. |
| 26 | ERRECTION OF EARTHING SET |
| 27 | Digging of pit, fixing of GI wire to the earthing system, Filling of pit. |
| 28 | SAGGING OF ACSR CONDUCTOR 6/1/2.59mm (Single wire). |
| 29 | Laying of conductor, stringing & sagging, Binding with insulator (only). |
| 30 | Sagging of G.I Wire for earth wire. |
| 31 | MANNUAL CARRIAGE OF L.T LINE MATERIAL CONSIDERING AVERAGE DISTANCE 0.500K.M. |
| 32 | MATERIAL TO BE SUPPLIED BY CONTRACTOR (Subject to the non-availability of material at Divisional Store). |
| 33 | HT line |
| 34 | Prov. RCC Muffs (2000mm) with concrete filling. |
| 35 | Prov. 22kV Pin Insulators with GI Pin (Porcelain,36kV, 10KN) |
| 36 | Prov. Disc Insulator Set (including Dead end clamp,Ballcleaves eye sockets, straight stapple & Bend Stapple etc.) Inluding Dead End Clamps etc.) |
| 37 | Prov. stay Wire (7/3.15mm) |
| 38 | Prov. Nuts & bolts. (off soze) |
| 39 | Prov. Aluminium paint. |
| 40 | Prov. Egg Insulator. |
| 41 | Prov. Stay Set HT (i/c stay clamp) |
| 42 | Prov. Earthing set HT |
| 43 | Prov. GI wire (8SWG) for earth wire |
| 44 | Sub Station |
| 45 | Prov.RCC Muffs (2000mm) with concrete filling. |
| 46 | Transformer LT Distribution Box and GO Switch fixing Assembly. |
| 47 | Prov.MS Angle Iron (50x50x6mm) Length : (450mm) x 1Nos. |
| 48 | Prov.GO Switch Handle Supporting :[ Channel Iron (75x40x5mm), Length : 460mm. |
| 49 | Prov.GO AB Switch Unit (11KV, 400A, 25KA)Tripple pole O/D Type |
| 50 | Prov.Prov. Disc Insulator Set (including Dead end clamp,Ballcleaves eye sockets, straight stapple & Bend Stapple etc.) Inluding Dead End Clamps etc.) |
| 51 | Prov. Stay Set HT (i/c stay clamp) |
| 52 | Prov.Stay Wire (7/3.15mm) |
| 53 | Pipe Earthingset |
| 54 | Prov. GI wire (6SWG) for earthing. |
| 55 | Prov.LT Distribution Panel Box with MCCB. |
| 56 | Prov.Half Clamp (MS Flat 50x6mm) |
| 57 | Prov.Full Clamps (MS Flat 50x6mm) |
| 58 | Prov.Nuts and Bolts of various sizes (Galvanised / coated) [Preferably 16 mmØ or more (with flat and spring washers)] |
| 59 | Prov.Aluminium Thimble |
| 60 | Prov.Cu Thimble 200Amp. |
| 61 | Prov.Barbed Wire |
| 62 | Prov.LT Cable Core (3.5 core) 95mm2 |
| 63 | Prov.Aluminim Paint |
| 64 | LT line |
| 65 | Prov. RCC Muffs (2000mm) with concrete filling. |
| 66 | Prov. Aluminium paint. |
| 67 | Prov. Shackle Insulator (16KN) |
| 68 | Prov. GI wire (8SWG) for earth wire |
| 69 | Prov. D-Iron |
| 70 | Prov. Nuts & bolts. |
| 71 | Prov. LT stay set. (i/c stay clamp) |
| 72 | Prov. support clamp |
| 73 | Providing Egg Insulator. |
| 74 | Prov. stay Wire (7/3.15mm) |
| 75 | Prov.LT Cable Core (3.5 core) 95mm2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender