Science and Technology Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58566590

Tender For Minor Civil Works Including Existing Toilet Renovation, Flowsolver Basement Waterproofing, And Drainage Works At The Rear Side Of The System Building, Kodihalli Campus, Nal, Bengaluru.

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
39.59 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
79500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Minor Civil Works Including Existing Toilet Renovation, Flowsolver Basement Waterproofing, And Drainage Works At The Rear Side Of The System Building, Kodihalli Campus, Nal, Bengaluru.

BOQ

Name of Work:- Minor Civil Works including Existing Toilet Renovation, FlowSolver Basement Waterproofing, and Drainage Works at the Rear Side of the System Building, Kodihalli Campus, NAL, Bengaluru.
Sl. No. Item Description
1EARTH WORK
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken of the face area timbered): Depth exceeding 1.5 m but not exceeding 3 m
4Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif.
5Extra for every additional lif of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
6CEMENT CONCRETE (CAST IN SITU)
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
8CLADDING WORK
9Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red /any colour Area of slab upto 0.50 sqnn
10Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
11Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
12Providing and fixing Ist quality ceramic glazed wall tiles of size 300x450mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13WOOD AND P. V. C. WORK
14Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) (Height upto 1.8m).
15FLOORING
16Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
17FINISHING
1812 mm cement plaster of mix: 1:4(1 cement: 4 fine sand)
1912 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand)
2015 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
21Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
22Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
23Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
24Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
25REPAIRS TO BUILDING
26Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
27Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
28DISMANTLING AND DEMOLISHING
29Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
30Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
31Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
32Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
33Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness up to 40 mm
34Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
35Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore
36Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
37Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
38Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
39Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
40SANITARY INSTALLATIONS
41Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
42Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
43Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
44Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
45Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
46Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
47WATER SUPPLY
48Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
49Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes
50Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
51Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
52DRAINAGE
53Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
54Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-charge: Rectangular manhole 90x80 cm and 45 cm deep
55ALUMINIUM WORK
56Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
57CONSERVATION OF HERITAGE BUILDINGS
58Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead.
59MARKET RATE ITEMS
60Supply and Installation for the Toilet Cubicle – STYLAM – HPL (HIGH PRESSURE LAMINATE) BOARD – NYLON SERIES of WC Cubicle with Door, made of 12mm thick solid compact laminate (phenolic core board) based on thermosetting resins, homogenously reinforced with cellulose fibres and laminates both sides to desired colour and texture, all as per manufacturer’s specifications. Doors shall be 12mm thick with edges chamfered. Accessories:1. Aluminium Anodised Top Rail 2. Aluminium Anodised ‘U’ Channel 3. Aluminium Anodised ‘h’ Channel All the makes of accessories for the cubicles to be as per the manufacturer’s specifications: Grade 6 – Nylon4. Coat Hook5. Auto Return Hinges6. Privacy Thumb Turn7. Adjustable legs8. Door Knob9. Rubber Lining for Door StopperSUPPLY OF TOILET CUBICLES –STYLAM NYLON SERIES ‘L’ TYPE Standard Dimensions:Standard Overall Height of Cubicle: 2000mmStandard Overall Width of Cubicle:1200mmStandard Ground Clearance:150mmStandard Width of Door:600mmStandard Depth of Cubicles: 1500mm
61Providing and laying of non adhesive non bituminous WPE-55 waterproofing membrane such as Talrak flexeal PEP or any equivalent as per the directions of Engineer- In-charge and manufacturer's specifications.
62Providing and pressure grouted for the cavities if the existing cavities in the size stone masonry wall joints, shall be pressure grouted with micro fine cement after fixing the nozzles/packers/non-return valve as per manufacturer's specifications, (under a pressure of 3 to 4 kg/sq.cm) sketch and directions of the Engineer-In-charge (Assuming 3 kg consumpton per nozzle/packers)
63Providing and fixing of Precast U (450x450mm) drain of 1mt length in position with necessary slope, including covering slabs, including fixing in position,labour,transportation etc.,complete
64P/F PVC Nahani trap (floor trap ) of approved quality and make and confirming to ISI specifications including construction of CC : 1:2:4 as directed by engineer-in - charge
65Providing and fixing PVC Cowl cap of approved quality and make confirming to ISI Specifications as directed.
66Providing and Fixing PVC/SWR pipes for sewer lines- Type :B of ISI: 13592 approved by CPWD specifications of approved make and quality with all necessary specials such as collars, elbows, bends, tees, doors Y's etc., using jointing ring with solutions for necesssary scafolding etc., complete with all lead and lift and as directed by the Engineer-in-charge. 150mm dia.
67Providing and Fixing PVC/SWR pipes for sewer lines- Type :B of ISI: 13592 approved by CPWD specifications of approved make and quality with all necessary specials such as collars, elbows, bends, tees, doors Y's etc., using jointing ring with solutions for necesssary scafolding etc., complete with all lead and lift and as directed by the Engineer-in-charge. 110mm dia.
68Providing and Fixing PVC/SWR pipes for sewer lines- Type :B of ISI: 13592 approved by CPWD specifications of approved make and quality with all necessary specials such as collars, elbows, bends, tees, doors Y's etc., using jointing ring with solutions for necesssary scafolding etc., complete with all lead and lift and as directed by the Engineer-in-charge. 75mm dia.
69Providing and fixing C.P Brass Bib cock of Jaquar make series of nominal bore 15mm bore
70Providing and Fixing C.P health fauset of approved quality conforming to IS:8931. 15mm nominal bore Jaquar make as directed by engineer in charge.
71Providing and fixing CPVC Control valve 20 mm nominal bore as per the direction of Engineer in charge.
72Providing and applying Fosroc chemical Brushbond is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond powder and Brushbond liquid acrylic emulsion. as per manufacture specification as per direction of Engineer-in-Charge.
73Providing and Fixng of Stainless steel circular grating plate of 100mm dia, as per manufacturer specification, as directed by Engineer-in-charge.
74Providing and Fixng of Stainless steel circular grating plate of 125mm dia with 25mm dia waste pipe hole, as per manufacturer specification, as directed by Engineer-in-charge.
75Providing and Fixng of jaquar make C.P push type liquid soap container as per manufacturer specification, as directed by Engineer-in-charge.
76Providing and Fixng of jaquar make 600mm long towel rod of cat no AQN-7711/Equivalent, as per manufacturer specification, as directed by Engineer-in-charge.
77Refixing of available PVC/Vitrous China Wash Basin,Urinal & EWC( after acid wash) including with all fittings and fixtures complete, and cutting and making good the walls and floors wherever required:
78Providing and fixing white vitreous china flat back half stall urinal magnum of parryware make and necessary clamps as per direction of engineer in charge.
79Providing spreader for urinals of PARRYWARE make as per direction of the engineer in charge.
80Providing a C.P. waste coupling for urinals of approved make as per direction of the engineer in charge.
81Providing a pressmatic urinal push cock of jaquar make as per direction of engineer in charge. 15mm nominal bore.
82Providing and Fixng of stainless steel Grab bars of 200mm bar of 304 grade , as per manufacturer specification, as directed by Engineer-in-charge.
83Dismantling of SWR pipes of CPVC exposed and concealed including finishing after taking out the pipes manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge: 75 mm to 150 mm nominal bore.
84Providing and fixing Bib cock 2 in 1 as per manufacture specification as per direction of Engineer-In-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58566590
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 39.59 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Council Of Scientific And Industrial Research
Work Description Tender for Minor Civil Works Including Existing Toilet Renovation, Flowsolver Basement Waterproofing, And Drainage Works At The Rear Side Of The System Building, Kodihalli Campus, Nal, Bengaluru.
Basic Detail
Tender No NAL/13/EBU-KH/2026-27
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 39.59 Lakhs
Tender Fee 500
EMD 79500
Exemption Not Available
Document List
62ed4722-649a-4f4d-b016-9f362bcbda92.html
AcceptenceLetters.pdf
Annex.pdf
BD.pdf
BOQ_347230.xls
CL.pdf
ML.pdf
Tenderdocument.pdf
Tendernotice_1.pdf
UL.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

62ed4722-649a-4f4d-b016-9f362bcbda92.html

pdf

AcceptenceLetters.pdf

pdf

Annex.pdf

pdf

BD.pdf

xls

BOQ_347230.xls

pdf

CL.pdf

pdf

ML.pdf

pdf

Tenderdocument.pdf

pdf

Tendernotice_1.pdf

pdf

UL.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender