Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58566359

Tender For Tender For Special Repair Work In Km 1 To 2(900) Of Km 64 Of Banda Babaru Kamsin Rajpur Marg State Marg No-92 To Km 1 To 2(900) Of Lohra Sampark Marg.

Issued by Government Departments · Banda, Uttar Pradesh
Tender Value
59 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
4.95 Lakhs
Bank guarantee accepted
Document Fee
2720
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Banda → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Tender For Special Repair Work In Km 1 To 2(900) Of Km 64 Of Banda Babaru Kamsin Rajpur Marg State Marg No-92 To Km 1 To 2(900) Of Lohra Sampark Marg.

BOQ

Name of Work:- बाँदा बबेरू कमसिन राजपुर मार्ग राज्य मार्ग सं०-92 के किमी 64 से लोहरा सम्पर्क मार्ग के किमी० 1 से 2(900) में विशेष मरम्मत का कार्य।
Sl. No. Item Description
1Providing, laying, spreading and compacting stone aggregates of 22.4-53mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density grading-III as per technical specification clause 405
2Providing and applying tack coat with V.G.-10 bitumen using bitumen pressure dristributor @ 0.35 to 0.45 kg. per sqm. on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
3Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant ,laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat . Claues 508
4Providing and laying seal coat Type-C sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using As per Technical Specification Clause 510
5Construction of shoulders with approved material 95% P.D. obtained from borrow pits with a lift upto 1.5m & lead up to 30 m, transporting to site, spreading grading to reqired slope and compacted as per PWD Specification. (E/w In Patri)
6Construction of C.C. Road, 300×300 mm Size U-Drain and RetaingwallProviding, laying, spreading and compacting stone aggregates of 22.4-53mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density grading-III as per technical specification clause 405
7Construciton of un-reinforced, plain jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.3 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixerof not less than 0.20cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing. spreading the concrete with shovels, rakes, compacting using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion, construction joints, applying joint filler board near approcehes to bridges/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501Specification Clause 1501
8Construction of shoulders with approved material 95% P.D. obtained from borrow pits with a lift upto 1.5m & lead up to 30 m, transporting to site, spreading grading to reqired slope and compacted as per PWD Specification. (E/w In Patri)
9Excavation in foundation in B.C soil including lift up to 15 meter and lead upto 30 m (100 ft) and including filling, watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M from the foundation trenches.(S.I.No. 251)
10Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work & including watering, dressing etc. Rate to include cost of all materials, labour and tools & plants etc. required for proper completion of the work. (S.I.No. 255)
11Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 1:4:8 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
12Cement concrete with 2cm gauge approved stone ballast, approved coarse sand. cement in the proportion 1:2:4 including supply of all materials,labour and tools and plants etc. required for proper completion of the work.
13Random course Rubble massonary in 1:4 cement and fine sand mortar in foundation and plinth, including supply of all materials, labour & T&P etc. required for proper completion of the work.
14Raised pointing with cement and fine sand of 1.25 FM mortar over RCR stone masonry work in proportion of 1:2 including supply of all materials, labour and T&P etc. required for proper completion of work as per S.I. No. 577.
15RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. As in Item (283) above but in RCC 1:1.5:3 Slab As Per SI No. 288
16Mild steel or iron wirk in plain work such as reinforced. Concrete or brick work (When not included in an over all rates) Wrought to required shape as necessary including binding for proper completion of the work and including supply of all steel wastage and over laping and hooks.
17P/L of 100 mm dia P.V.C. Pipe in Weap hole. Material Rate Chapter-1 As Per SI No. 36(31)
18Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall return wall to the full hight, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58566359
AUTHORITY Government Departments
TENDER VALUE 59 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender For Tender For Special Repair Work In Km 1 To 2(900) Of Km 64 Of Banda Babaru Kamsin Rajpur Marg State Marg No-92 To Km 1 To 2(900) Of Lohra Sampark Marg.
Basic Detail
Tender No 4519/35C-Ban Cir/2026 Date-03-11-2026
Bidding Type Tender
Location
City Banda
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 59 Lakhs
Tender Fee 2720
EMD 4.95 Lakhs
Exemption Not Available
Document List
64937868-db4c-4a7c-bb32-7f14276df285.html
BOQ_2295956.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

64937868-db4c-4a7c-bb32-7f14276df285.html

xls

BOQ_2295956.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender