Tender For Special Repair To Static Water Tank At Lpg Gp At 264 Coy Asc, Speciall Rapair To Staircase, Flooring, Plinth Protection Etc Of Certain Bldgs At Vd Road And Provn Of 01 X Ladies Toilet At Sub Area Hq, New Cantt Prayagraj
Tender Overview
Project Description
Tender for Special Repair To Static Water Tank At Lpg Gp At 264 Coy Asc, Speciall Rapair To Staircase, Flooring, Plinth Protection Etc Of Certain Bldgs At Vd Road And Provn Of 01 X Ladies Toilet At Sub Area Hq, New Cantt Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above Ground Level) complete all as specified and directed. |
| 3 | M&L for excavation over areas in soft and loose soil and getting out complete all as specified and directed. |
| 4 | M&L for hardcore of gauge 50mm thick with brocken stone not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and directed. |
| 6 | M&L for removing excavated material to a distance not exceeding 50 mtr complete all as specified and directed. |
| 7 | M&L for returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed |
| 8 | M&L for flat formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed |
| 9 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed |
| 10 | M&L for M25 RCC foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 11 | M&L for RCC M-25 using 20mm graded stone aggregate for roof slabs, floor slab, lintels and slabs supported on walls and similar work complete all as specified and directed. |
| 12 | M&L for Brick work with sub class `B' bricks, straight or curved on plan exc 6 mtr mean radius, built in CM (1:4) complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | Supply only Liquid Water Proofing Compound (ISI marked) complete all as specified and directed. |
| 15 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed.Note : WPC to be mesured and paid separately under appropriate item. |
| 16 | Surface excavation not exceeding 30 cm depth and average 15 cm deep in soft/loose soil complete all as specified and directed. |
| 17 | M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved joints filled with sand complete including dismantling of tiles complete all as specified and directed. |
| 18 | M&L sand filling under floors or in foundation including watering and consolidation, 50mm thick complete all as specified and directed. |
| 19 | M&L for providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in benching, coping, kerb and like including necessary formwork and weathering, slightly rounded or chamfered as required complete all as specified and directed. |
| 20 | M&L for PCC type E2 1:5:10 using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 21 | Excavation in post holes ( or similar holes) in soft/loose soil each not exceeding 0.50 Cum getting out, watering and removing surplus soil to a distance not exceeding 50 mtr and making good surface complete all as specified and directed. |
| 22 | M&L for PCC 1:2:4 type B1 using 20mm gragded stone aggregate for post hole complete all as specified and directed. |
| 23 | M&L for MS iron post and struts including all necessary drilling, bolting or riveting screws etc and similar work complete all as specified and directed. |
| 24 | M&L roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc Fe-410-W (Grade E-250) Quality-A complete all as specified and directed. |
| 25 | M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scews complete all as specified and directed. |
| 26 | M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scews complete all as specified and directed. |
| 27 | M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 28 | M&L for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight not less than 4.0 Kg/Sqm complete all as specified and directed. |
| 29 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 30 | Taking down cement plaster on brick or stone walls including wall tiles etc. with raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 31 | M&L for machine cut kota stone flooring thickness not less than 18mm over 20mm thick 1:4 cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, and polishing and moulding of edges wherever reqd complete all as specified and directed. |
| 32 | M&L for machine cut kota stone slab thickness not less than 18 mm as in riser of steps, skirting, dado and pillar laid over 10mm thick 1:4 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick in cement mortar CM 1:4 on external surface and finished even and fair complete all as specified and directed. |
| 34 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed. |
| 35 | M&L 75mm thick PCC type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 36 | M&L 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection laid in alternate bay finished even and smooth including necessary formwork and making joint filled with sand and bitumen mixture complete all as specified and directed. |
| 37 | M&L 300mm x 300mm chequered cement concrete tiles thickness not less than 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 38 | Excavating in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth, for foundation etc or shafts, wells, cesspits, manholes, pier holes etc getting out etc complete all as specified and directed. |
| 39 | M&L for RCC (Nominal Mix) (1:1.5:3) (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 40 | M&L for RCC (Nominal Mix) (1:1.5:3) (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 41 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete etc complete all as specified and directed. |
| 42 | Form work to rough finished surface of sides and soffits of floor or roof beams, beam hunchigs, girders, bressullers, lintels, cantilevers, shelves including supports over hankes, etc of plinth/roof beam and similar works vertical or better for fair finished surfaces of concrete etc complete all as specified and directed. |
| 43 | S&F mild steel TMT 6 to 8 mm as in stirrups cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia conformig to Fe 500 complete all as specified and directed. |
| 44 | M&L for brickwork with sub class `B` bricks, in straight or curved on plan exceeding 6 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 45 | Rendering 15mm thick in cement mortar CM 1:4 (first coat 10mm thick and second 5mm thick) mixed with water proofing compound @3% by weight of cement (in top layer) external surface of toilet walls and finished even complete all as specified and directed.Note : WPC will be measured and paid separetely. |
| 46 | M&L for rendering 10mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and smooth complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm thick wall care putty complete all as specified and directed. |
| 48 | M&L for preparation of newly plastered surfaces of celing and applying three coats of white wash etc complete all as specified and directed. |
| 49 | M&L for 100mm thick cement concrete type D2 1:4:8 using 40mm graded aggregate as in sub base of flooring complete all as specified and directed. |
| 50 | M&L for 40mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub floor etc complete all as specified and directed. |
| 51 | M&L for Non-Skid coloured non skid ceramic tiles 7-8 mm thick (square/rectangular) area of tiles exceeidng.11 Sqm and not exceeding18 Sqm in each tile as in floors, skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc complete all as specified and directed. |
| 52 | S&F for Glazed ceremic coloured printed tiles of size 450mm x 300mm x 7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1:4 for laying glazed tiles in floors etc complete all as specified and directed. |
| 53 | S&F for outer dia of 16mm 3 layer PP-R polypropylene random copolymer concealed pipes SDR-7.4 (PN16) UV stablized and antimicrobial fusion welded having thermal stablity foe hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings and cutting chasing wherever reqd fixed complete to wall ceiling or in floor etc complete all as specified and directed. |
| 54 | S&F for outer dia of 25mm 3 layer PP-R polypropylene random copolymer concealed pipes SDR-7.4 (PN16)UV stablized and antimicrobial fusion welded having thermal stablity foe hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings and cutting chasing wherever reqd fixed complete to wall ceiling or in floor etc complete all as specified and directed. |
| 55 | Supply and fixing vitreous china wash hand basin, white, flat back, size 580mm x 450mm excluding chain and plug and porcelain stopper but including CP pillar taps, pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT,waste pipe MS brackets including cutting for and pining in ends of brackets complete all as specified and directed. |
| 56 | S&F CP tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 57 | S&F 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 58 | S&F CP toilet paper holder fancy type etc complete all as specified and directed. |
| 59 | S&F triple layer Rotational moulded polythene water storage tanks, hoisted and fixed in position 500ltrs capacity, checked nut complete all as specified and directed. |
| 60 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 61 | S&F PVC connection 450mm long, 15mm size with brass chromium plated nuts complete all as specified and directed. |
| 62 | S&F ball/float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 grams complete all as specified and directed. |
| 63 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 64 | S&F 110mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 65 | M&L for 75mm bore dia pvc floor trap with CP grating, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed. |
| 66 | Supply and fixing vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device complete all as specified and directed. |
| 67 | S&F chromium plated fancy type Hand Jet spray (Health faucet) complete all as specified and directed. |
| 68 | Supply and fixing 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32mm dia polythene high density flush pipe, PVC connection pipe and connected to water closet any pattern complete all as specified and directed. |
| 69 | S&F for 15mm dia Angle cock, fancy type cast copper alloy, screwed down, high pressure with crutch or fany handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 70 | S&F 110mm dia PVC SWR pipes of pressure 6 Kgf/Sqcm fixed complete to walls ceilings, in floors etc including all necessary fitting arrangements and bends couplings etcs in rainwater pipe complete all as specified and directed. |
| 71 | Cutting into existing manholes with internal dia of pipe 150mm brick wall (ground/first floor) for connecting new drain pipe/bend/Tee of following sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (½ round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate smooth finish and reforming benching as required for following internal dia of pipe complete complete all as specified and directed. |
| 72 | Supplying, laying and testing of 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars etc complete all as specified and directed. |
| 73 | M&L for concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate including necessary shuttering and supports to concrete and for laying bends to falls complete all as specified and directed. |
| 74 | M&L for precast reinforcedcement concrete (1: 2: 4) type B-1 using 20mm graded stone aggregate as in manhole covers, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form works complete all as specified and directed. |
| 75 | Cleaning the roof surfcae and applying a coat of bituminius primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete all as specified and directed. |
| 76 | M&L for applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. |
| 77 | M&L for APP based polymeric water proofing membrane minimum weight 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150 Grams/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer, complete all as specified and directed. |
| 78 | M&L for preparation and applying two coats of Aluminium paint over a coat of hot blown bitumen of grade 85/25 conforming to IS 702 @ 1.20 Kg/Sqm a coat of bituminius primer @ 0.30 ltrs per square meter uniformily on APP membrane complete all as specified and directed. |
| 79 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified and directed. |
| 80 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 81 | S&F 100mm long extruded brass butt hinges with steel pin complete all as specified and directed. |
| 82 | S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 83 | S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 84 | S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed. |
| 85 | M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment of any type and shape the minium compressive strenth not less then 350 Kg/Sqcm as approved complete all as specified complete all as specified and directed. |
| 86 | S&F steel ventilators, fixed type with glazing bars complete all as specified and directed. |
| 87 | S&F galvanised mild steel wire cloath 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks of galvanised wire staples complete all as specified and directed. |
| 88 | S&F 3mm thick figured glass pin head type in square not exceeding 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed. Please Enable Macros to View BoQ information |
| 89 | S&F 3mm thick figured glass pin head type in square not exceeding 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender