Housing Urban and Rular Development Local Bodies Closing in 4 days TDR #58565419

Tender For maintenance Of electrical installation In Nrb At Chandigarh (Arrangement For Conduct Of General Election 2026 Various Schools And Nrbs Under maintenance Booth, Sector-9 & 10, Chandigarh Under The Jurisdiction Of Sde E-5, Chandigarh)

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
2.48 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
4970
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for maintenance Of electrical installation In Nrb At Chandigarh (Arrangement For Conduct Of General Election 2026 Various Schools And Nrbs Under maintenance Booth, Sector-9 & 10, Chandigarh Under The Jurisdiction Of Sde E-5, Chandigarh)

BOQ

Name of Work:- MTC. OF E.I. IN NRB AT CHANDIGARH (ARRANGEMENT FOR CONDUCT OF GENERAL ELECTION 2026 VARIOUS SCHOOLS AND NRBS UNDER MTC. BOOTH, SECTOR-9 & 10, CHANDIGARH UNDER THE JURISDICTION OF SDE E-5, CHANDIGARH)
Sl. No. Item Description
1DSR Item No. 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.
2Group C
3DSR item No.1.39 Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
4DSR item No.1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
5DSR Item No. 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
63 x 1.5 sq. mm
73 x 2.5 sq. mm
8DSR item No.1.23 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
95/6 amps switch
103 Pin 5/6 A. socket outlet
1115/16 amps switch
126 Pin 15/16 A. socket outlet
13DSR Item No. 1.29 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.
14DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
15Single pole
16Double pole
17Triple pole and neutral
18DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
195/6 amps switch
203 Pin 5/6 A. socket outlet
2115/16 amps switch
226 pin 15/16 amps socket
23Providing and fixing MCB TPN 63 AMPS, 415 volt ‘C’ curve 10 KA breaking capacity in the existing enclosure as per site requirement. The job includes making connection with suitable size with copper wire to the entire satisfaction of engineer in charge. Make should be
24S/E of PVC Batton of following sizes. The Batton should be fixed on the wall with help of PVC rawl plug etc. to the entire satisfaction of EIC.
25Size 1”
26DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required
27100 A,30KA,FPMCCB
28200 A,36KA,FPMCCB
29Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The make should be Super Hylam / Formica / GreenLam only.
30Supply and Erection of electronic step type socket type fan regulator in existing B.L. Sheet including making connection and petty material reqd. to complete the job. The fan regulator should be of Anchor Panta / Havells Reo/ Gold Medal Essenza make only
31Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption,(As per Complete Item No. 14 of the DNIT).
32Size 15” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only.
33Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only.
34DSR ITEM NO. LED 8.9.5Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,(As per Complete Item No. 15 of the DNIT).
3518-22 watt
36DSR Item no. 8.16LED Flood light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt. Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 16 of the DNIT).
37100 watt
38Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. (As per Complete Item No. 17 of the DNIT).
39Size 10 Sq.mm 2 Core XLPE Al. Arm. Cond. Cable
40Supply & laying of PVC copper wire 1.5 mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The copper wire should be of Polycab/ L&T/ Havells/ Finolex/ R.R. Kables make only.
41S/E of 18Watt./20Watt. 4’ long LED tube rod made of polycarbonate material should be installed in existing LED fitting base only. The make of LED tube rod should be same as that of existing LED fitting. The job includes cost of carriage, erection, testing and commissioning of the LED tube rod etc. as required to complete the job to the entire satisfaction of Engineer In Charge. Specification of LED tube rod: Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58565419
AUTHORITY Local Bodies
TENDER VALUE 2.48 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Chandigarh Administration Engineering Department
Work Description Tender for maintenance Of electrical installation In Nrb At Chandigarh (Arrangement For Conduct Of General Election 2026 Various Schools And Nrbs Under maintenance Booth, Sector-9 & 10, Chandigarh Under The Jurisdiction Of Sde E-5, Chandigarh)
Basic Detail
Tender No E1/TN-495
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 25 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 2.48 Lakhs
Tender Fee Ref. Documents
EMD 4970
Exemption Not Available
Document List
7d75af03-db00-44b7-be89-0057a6866107.html
Annexure.pdf
BOQ_119246.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

7d75af03-db00-44b7-be89-0057a6866107.html

pdf

Annexure.pdf

xls

BOQ_119246.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender