Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58564913

Tender For Special Repairs To Bldg No T-153/Bd, T-154/D, T-155/D And T-156/D (Toilet & Urinal) And Provn Of Conference Room In Ge Office Complex At Mil Stn Kapurthala Under Ge Kapurthala.

Issued by Statutory Bodies & Commissions/Committees · Kapurthala, Punjab
Tender Value
30.44 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
60880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Bldg No T-153/Bd, T-154/D, T-155/D And T-156/D (Toilet & Urinal) And Provn Of Conference Room In Ge Office Complex At Mil Stn Kapurthala Under Ge Kapurthala.

BOQ

Name of Work:- Special repairs to Bldg No T-153/BD, T-154/D, T-155/D and T-156/D (Toilet & Urinal) and Provn of Conference Room in GE Office complex at Mil Stn Kapurthala under GE Kapurthala.
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repairs to Bldg No T-153/BD, T-154/D, T-155/D and T-156/D (Toilet & Urinal) and Provn of Conference Room in GE Office complex at Mil Stn Kapurthala under GE Kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Dismantling asbestos sheet plain or corrugated sheeting of any gauge or thickness including nainital or similar pattern in roof covering all as specified and directed.
3S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
4S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
5Dismantling wroght iron or mild steel work of any description not otherwise provided for.
6S&F of rolled mild steei in roof trusses (Framed) trussed,purlin, rafter, crane gantries, rails and fasteningh and heavhy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats, brakcet etc complete Fe-410-W (Gde E-250 quality A) all as specified and directed.
7S&F of mild steel plates(pain or chequered) channel, square cut or notched(ordinary and counter sunk) forming holes without any attachment FE 410-W(Gde E-250 quality ball as specified.
8Demolition and breaking up 200mm bore drain pipe of any type, in cement mortar and taking out from tranches complete all as specified and as directed.
9S&F of reinforced concrete pipes, 200 mm dia class NP2, laid and jointed complete with collars as specified and directed.
10M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) concrete bed to drain pipe incl packing under and haunching against the sides of pipe as they are laid and tested for 150mm bore pipe complete all as specified and as directed.
11Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 /200/300mm bore drain pipe.
12M&L for PCC 1:2:4 type B-0 (using 20 mm graded agg) as in coping, benching of Man holes.
13M&L for pre cast cement concrete 1:2:4 as in man hole covers type B-1 (20 mm graded agg) as in manhole cover set in cement mortar 1:6 complete all as specified and directed.
14S&F for TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
15- ditto - all as per item No.13 here in before but 8mm dia and over as in stirrups, spacers and binders complete all as specified and directed.
16Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed.
17M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas , manhole cover , tank platform etc; complete all as specified and directed.
18M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
19Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
20M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement complete all as specified and directed.
21M&L for PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and directed.
22M&L for cement concrete type B-2 1:2:4 (40mm graded aggregates) as in surface channel and drains all as specified and directed.
23Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each
24S&F of factory made solid pvc wire gauzed pvc door shutter 30mm thick (style)consisiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour pvc 'C' channel having wire gauze in lieu of pvc paneel. The wire gauge shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly. Wire mess shapp be measured separately)
25S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed.
26S&F of 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.
27S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.
28S&F of fFactory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1complete all as specified and directed.
29S&F of alumunium hinges for door shutter, size of hinges in 100mm complete all as specified and directed.
30S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed.
31S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm longcomplete all as specified and directed.
32Demolition of cement concrete in gound floor and paving n.exc 15cm thickness(Below or above ground level all as specified and directed.
33M&L for 40mm thick cement concrte type B-1, 1:2:4 (20mm graded aggregates as in sub base of floor complete all as specified and directed.
34M&L for 25 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates finished even & smooth without using extra cement complete all as specified and directed.
35M&L for vitrified ceramic light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 Sqm and n exe 1.00 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed.
36M&L for vitrified ceramic light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 Sqm and n exe 1.00 Sqm in skirting and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed.
37M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement Paste pointed in white or colour cement to match the colour, including 10 mm thick cement screed bed (1:4) and including dismantling of tiles complete all as specified and directed.
38M&L for non-skid ceramic tiules 7 to 8mm thick (square/rectangular)Area of each tiles.exc0.11 sqm bu not exc.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
39Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed.
40S&F of CPVC pipe of outer dia 16mm SDR 11 & plain CPVC SDR 11 fittings / adhesive(solution) on walls/ceiling or laying in floor complete all as specified and directed.
41Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed.
42S&F of CPVC pipe of outer dia 20 mm SDR 11 & plain CPVC SDR 11 fittings / adhesive(Solution) on walls/ceiling or laying in floor complete all as specified and directed.
43S&F of brass CP wall mixer shawer set for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
44S&F in repairs 15 mm bore CP bib taps fancy type long body cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. (Make: Prayag)
45S&F of PTMT corner shelf with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms)
46S&F in repairs fancy type chromium plated stop valves/ Angle valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm complete all as specified and directed.
47S&F in repairs vitreous china european type wash down water closet pan (single piece including built in flushing cistern) colour (as specified and directed) including seat cover (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections complete all as specified and directed.
48S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 ltr capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed.
49S&F in repairs vitreous china squatting pan orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed.
50S&f for vitreous china ware wash basin white, flat back size 550X400mm with pedestal including 15mm dia swain neck pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete
51S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
52S&F of soap-dish chromium plated in heavy duty weight not less than 180 grms complete all as specified and directed.
53S&F of 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.
54S&F in repairs CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed.
55S&F of shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats(min weight 300gm) complete all as specified and directed.
56Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in cement mortar (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed.
57S&F of 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed.
58S&F of 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed.
59S&F of 75 mm PVC (SWR) bend complete all as directed.
60S&F of 110 mm PVC (SWR) bend complete all as directed.
61S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed.
62S&F of 110 mm bore PVC (SWR) vent cowl complete all as directed.
63S&F of PVC (SWR) gully trap 125/110 mm setting and jointing with solvent , complete all as directed.
64S&F of 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore.
65Dismantiling water tank PVC 1000 Ltrs and removing from site
66Dismantiling water tank PVC 500Ltrs and removing from site
67S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity including fittings and as directed.
68S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed.
69S&F in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
70S&F of gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed.
71Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises.
72M&L of brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
73Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified.
74M&L for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.
75M&L for 15mm thick rendering on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound complete all as specified and as directed.Note:- water proofing compound shall be measured and paid seprately.
76M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.
77M&L for 15mm thick Rendering in cement mortar 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed.Note:- WPC shall be paid separately.
78M&L for 10mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc complete all as specified and directed.
79M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla 1.00mm thick white putty complete all as specified and directed.
80M&L for preparation of new plastered or unplastered decorated surfaces of walls or cornics thereafter applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed.Note:- Exterior emulsion paint to be done by Roller.
81S&F of anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc; complete all as specified and directed.
82S&F of anodised aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door anodised alumnium snap beading, screws etc; complete all as specified and directed.
83S&F of anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc; complete all as specified and directed.
84S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
85M&L for providing and fixing factory made uPVG white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.
86S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed.
87S&F in repairs vitreous china urinal full stall type, white including connections to flushing pipe and outgoing pipes fixed all as specified and directed.
88S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as specified and directed.
89S&F in repairs 125mm over head shower of chromium plated any colour or fixing with 15mm pipe with 225mm, SS Arm and flange complete all as specified and directed.
90S&F 4.00mm thick sheet glass, ordinary quality in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed.
91S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified.
92S&F 600x1500 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel all round,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed.
93Surface excavaton n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.
94Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed.
95Removing excavated material n.exc50m and depositing where directed at a level n.exc1.5m above the starting point Note : (i) Excavated earth is used for area required earth filling. (ii) Charges of labour for earth filling is not given seperately it is considered in this item .
96Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick using excavated soil.
97M&L for precast cement concrete block masonary kerb stone with solid block (size 30x20x10 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete
98M&L for hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface under floor and plingh protection all as specified and directed.
99M&L for cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in sub base all as specified and directed.
100M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
101M&L for form work to sides of concrete foundations, footings, bases of columns, and similar work etc for rough finished surfaces of concrete all as specified and directed.
102M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete all as specified and directed.
103M&L for form work to sides of soffits of plinth beams; lintels beams, roof beams and similar work for rough finished surfaces of concrete all as specified and directed.
104M&L for RCC M-25 as in foundation including raft, footings, foundation plinth beams bases of columns and the like complete all as specified and directed.
105M&L for RCC Design Mix M-25 (20 mm graded agg.) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
106M&L for RCC (Design Mix) M-25 (20mm grade) as in columns, pillars, piers, posts and struts complete all as specified and directed.
107M&L for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete.
108M&L for RCC M-25 as in slab supported on walls, beams and column in floor roofs landing the like complete all as specified and directed.
109M&L for preparation of newly plastered surface making surface completely dry after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed.
110M&L for cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed.
111M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed.
112Supply only integral water proofing compound.
113M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
114M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.
115M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed.
116S&F of 4.00mm dia plain mild steel wire galvanised class 3 in mosquoti nets/cloth drying including straining and fixing to wood, concrete or steel post and /or to straining bolts including securing with and provision of galvanised iron tying wire galvanised iron staples or steel pins
117Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit or to refixing of serviceable items(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
118M&L for point wiring with 1.5 Sqmm (Nominal Area) FRLSH PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, socket, bell push, fan regulators etc. as required with modular frame and cover of 1 module to 18 module as required at site all as specified and as directed for the following points :-
119One light point controlled by one 1-way switch complete all as specified and directed.
120One ceiling / exhaust fan point controlled by one switch complete all as specified and directed.
121One three pin socket out let 5 amps on independent board complete all as specified and directed.
122One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed.
123- ditto - all as per item No. 117 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed.
124- ditto - all as per item No. 117 above but with 4 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one geyser point on independent board complete all as specified and directed.
125S&F of switch modular type 6A 240 Volts complete all as directed.
126S&F of switch modular type 15A 240 Volts complete all as directed.
127S&F of ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed.
128S&F of socket outlet 2 in 1, 3 pin, 5/6 amp modular 2 module type with shutters complete.
129S&F of socket outlet 2 in 1, 3 pin, 5 and 15 amp modular type 2-module shutters complete.
130Supply, installation, testing and commissioning of 300 mm sweep heavy-duty exhaust fan copper wound with robust metallic body and guard, suitable for 230 V, 50 Hz, min 900 RPM, single-phase AC supply, fitted with high-efficiency capacitor-start/run motor having double ball bearings, dynamically balanced blades, louvered shutters for prevention of reverse air entry and ingress of dust/insects, suitable for continuous operation, corrosion-resistant powder-coated finish, complete with mounting frame, safety guard, capacitor, necessary fasteners, electrical connections, making hole of suitable size if necessory complete as directed.
131S&F of LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed.
132S&F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed.
133S&F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with complete all as specified and directed.
134S&F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
135Supplying, installing, testing and commissioning of 1.5 TR capacity wall mounted split type air conditioner, BEE 5-Star rated, inverter type, R-32 refrigerant, 230V, 50Hz, single phase, complete with indoor & outdoor units, copper refrigerant piping with insulation, interconnecting cable, drain pipe, wall mounting brackets/stand, remote control, suitable MCB/isolator and all necessary accessories, complete in all respects as required for satisfactory operation. Note : Split A/Cs rate include the cost of 5 KVA single phase, copper wound automatic voltage stabilizer suitable for 1.5 TR split AC, with input voltage range 130–300 V AC and regulated output of 230 V ±1%, complete with servo motor controlled voltage regulation, digital input/output voltage display, time delay, overload, short-circuit and high/low voltage protection, suitable enclosure and all necessary accessories, complete all as specified and directed.
136M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 4 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.
137Taking down old unsv sub main and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper conductor, multi stranded cable of size 2.50 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed.Note :- Two run of 2.50 Sqmm cable one run of 2.50 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.)
138S&F of TPN horizontal type, 4 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-54 DB's IK-09 flush mounted with 200 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCB 100 Amps, four pole as incomer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor complete all as specified and directed.
139S&F of MCCB, 63 Amp, four Pole, 415 Volt, 10KA complete all as specified and directed.
140S&F of MCB TPN 240 volts 25- 100 Amps, 16KA, B-series complete all as specified and directed.
141S&F of MCB Single pole 240 volts 6-32 Amps, 10KA, B-series complete all as specified and directed.
142M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed.
143Supply, installation, testing and commissioning of 50 Litre capacity vertical wall-mounted electric storage water heater, ISI/BIS marked and conforming to applicable BIS standards, with minimum 5-Star BEE energy rating, suitable for 230 V, 50 Hz, single phase AC supply, having minimum 2 kW heating element of copper/Incoloy type suitable for hard water, corrosion-resistant enamel-coated steel inner tank with CFC-free high-density PUF insulation, powder-coated CRCA/GI outer body, adjustable thermostat with thermal cut-out, multi-function safety valve, pressure relief valve, non-return valve, thermal protection and sacrificial magnesium anode, suitable for minimum 8 bar working pressure, with power and heating indication, IPX4 or better protection, complete with wall mounting brackets, inlet/outlet connections, Steel braided 450 mm flexible connection pipes, isolation valve, drain arrangement, electrical connection, earthing and all necessary accessories as directed.
144S&F of SPN enclosure with a two pin and earth plug and socket with single pole MCB 20 Amp complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564913
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30.44 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Bldg No T-153/Bd, T-154/D, T-155/D And T-156/D (Toilet & Urinal) And Provn Of Conference Room In Ge Office Complex At Mil Stn Kapurthala Under Ge Kapurthala.
Basic Detail
Tender No 8225/E8
Bidding Type Tender
Location
City Kapurthala
State Punjab
Key Dates
Publish Date 17 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 30.44 Lakhs
Tender Fee 500
EMD 60880
Exemption Available
Document List
59adeec0-635d-4c21-8492-354933fe9bb5.html
BOQ_896490.xls
Tender-8225.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

59adeec0-635d-4c21-8492-354933fe9bb5.html

xls

BOQ_896490.xls

pdf

Tender-8225.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender