Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58564908

Tender For Certain B/R Repairs To Otm And Md Accn At Air Force Station Mullanpur Under Age (I) Highground Chandigarh

Issued by Statutory Bodies & Commissions/Committees · Chandigarh, Chandigarh
Tender Value
20 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Certain B/R Repairs To Otm And Md Accn At Air Force Station Mullanpur Under Age (I) Highground Chandigarh

BOQ

Name of Work:- CERTAIN B/R REPAIRS TO OTM AND MD ACCN AT AIR FORCE STATION MULLANPUR UNDER AGE (I) HIGHGROUND CHANDIGARH
Sl. No. Item Description
1Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed
2Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed
3Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
4Resecuring or easing & adjusting without taking down Shutters of any description exceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed.
5Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60mm, made out of 1.25mm thick sheet, including one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
6Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, including one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
7Material and labour for providing PCC 1:3:6 type C0 using 12.50 mm graded crushed stone aggregates as in filling of pressed steel chowkhats, cill, step and for inserting hold fasts etc and similar work , complete, all as specified and directed.
8S & F Factory made single rebated extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete as per direction of Engineer-in-Charge.
9Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of size 30 MM thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
10Supply and fixing second class hard wood 30 mm thick plain, glazed and skelton factory made shutters, open rebated and prepareddivided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
11Supply and fixing flush shutters 30 mm thick, solid core constuction, with block board core and plywood face panels commercial face on both side complete all as specified and directed.
12S&F 75mm stainless steel butt hinges suitable for 25mm thick shuter for doors with stainless steel hinge pin, & fixed to WPC door using stainless steel screws complete all as specified & as directed.
13Supply and fixing butt hinges, medium weight, 100mm long, cold rolled mild steel , complete all as specified and directed.
14Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
15Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, including replacement of damaged wooden bedding with and including two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
16Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins, complete all as specified and directed.
17Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
18Supply and fixing, 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified
19Supply and fixed in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified
20Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.
21Supply and Fixing in repair, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.
22Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
23Supply and fixing in repir door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge.
24Supply and fixing aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
25Supply and fixed in repairs aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
26Supply and fixing, 150 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
27Supply and fixing in repair, 150 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
28Supply and fixing 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
29Supply and fixing in repair second class hard wood plain fillets exc 13 & n exc 25 sq cm sectional area, square/rectanguar or triangular in section, wrought secured with nails and fixed complete all as specified and directed.
30Supply and fixing continuous ( piano ) hinges mild steel, bright finish or electroglavanised,size 30mm complete all as specified
31Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.
32Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-184-2012 sheets 1/3 & 3/3.
33Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/2 & 2/2.
34Supply and Fixing MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
35Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.
36Supply and fixing in repairs angle bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.
37Supply and fixing in repairs angle stop valve, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.
38Supply and fixing in repairs pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia, complete all as specified and directed.
39Supply and fixing in repairs PVC connection 15 mm size of length 600 mm with PTMT nuts, complete all as specified and directed.
40S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste (PTMT Coupling) fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed.
41Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.
42S&F in repairs Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
43S&F Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws as fixed in repairs as approved by Engineer in Charge, complete all as specified and directed.
44S&F in repairs looking mirror 600 mm x 450 mm without frame beveled edge mirror of selected quality glass mounted on 6 mm thick fixed to wall with projected hinges, complete all as specified and directed.
45S&F in repairs towel rail 600 mm long of PTMT fixed with and including Chromium plated brass screwsand wooden/plastic cleats (Minimumweight 90gms) fixed to walls with screws and plastic cleats, complete all as specified and directed. Make-
46Supply and fixing in repairs 110 mm dia bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed.
47Supply and fixing 110mm bore PVC (SWR) bends any radius, fixed to pipes with adhesive, complete all as specified and directed.
48Supply and fixing in repair PVC (SWR) floor trap plain 75mm with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
49Supply and fixed in repairs door seal strip PVC body fitted with rubber seal of superior quality complete all as specified and as directed
50Supply and fixing in repairs flexible 32 mm size PVC waste pipe for Sink/ WHB complete all as specified and directed
51S&F in repairs 18 mm thick Pre-laminated HDHMR Board Scratch and strain free (density over 850 kG/sqm) in Door, Shelves for Kitchen Cabinets, jointed to form cabinet by means of PVC Adhesive Solvent and fixed to walls using Self-tapping Steel Screws, etc., including hinges,handles covering borders/thickness with PVC tape of apprpved colour and design,complete all as specified and as directed. Make : Action Tesa ,century ply or equivalent
52Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
53Demolition of mud phuska on roofs, any thickness, including plaster and leeping plaster and bottom layer of polythene film if any, including removal of retrieved material outside defence land, complete all as specified directed.
54Demolition of un reinforced cement concrete of any description or as roof padding and covering concrete with app membrane roof treatment and in any position not otherwise specifically provided for and remove all the debris out of MoD land complete all as specified and as directed
55Material and labour, providing cement concrete type B1, (1:2:4) 20mm graded aggregate stone mixed with Liquid WPC @ 1% by weight of cement as in roof padding, kerb, benching and like, required thickness and slop to maintain, finished the surface fair and even without using extra cement, complete all as specified and as sdirected by Engr in Charge.Note: Supply only water proofing compound shall be measured and paid separately
56Supply only Liquid water proofing compound, complete all as specified.
57Supplying and applying SmartCare Damp Proof Ultra, fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflectivity Index (SRI) of 105 on top of roof in three coats @ 1.8 Kg/sqmt to be reinforced, having minimum elongation of 350%, tensile strength 2.9Mpa and shall have crack bridging ability of up to 2.5mm and shall resist 10bars of hydrostatic pressure, reduces surfaces temperature up to 10 degree Celsius also IGBCcertified (Indian Green Building Council) Certificate will be provided by company. The system consists of self-priming with 33% water dilution followed by two undiluted coats of Damp Proof ultra,the fibermesh of 40 to 50 GSM must be sandwich between 1st and 2nd coat of Damp Proof Ultra.(dry film thickness of complete application/system not less than 500 microns) and Ponding test to be done after application of material. 10 years Waterproofing warranty on Terraces only if Asian Paints AuthorizedApplicator will do the work. Bore Packing: Using AP Smartcare Repair Polymer over pipe and Internalside of concrete followed by filing high strength non shrink grout for a gap of up to 20mm (between pipe and concrete) before treating the surface with Waterproofing layer.
58Material and Labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.
59All as per serial item No 60 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable ties as obtained from Serial item No 56 here-in-before shall be reused.(ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
60Dismantiling wall and ceiling boards of any description including cover fillets, and removal of debris/rubbish out of premises complete all as specified.
61Supply and fixing Modular False ceiling with vinyl laminated gypsum tiles having 8 mm thickness, of size 595mmx595mm the tiles to be fixed with suspension system (Grid) of size 24mm x32mm , made of hot dipped galvanised steel section to prevent corrosion and the exposed surfaces of grid chemically clened capping prepainted /backed in polyester paint. The standared procedure for installation of grids is to be followed, where main runners of standard lenth of 3600 mm used along with cross section of 1200mm c/c . Wall angle (size 22mm x22mm) of the same quality as the grids to be used on the periphery along the wall or partion using screws at 600mm c/c and cross tee (24mmx23) tobe interlocked between main runner at 600mm c/c(max) to form agrid of 600mm x600mm. The main runner to be hung from the sofit with the help of 4mm dia GI wire hanger and 6mm dia wire anchore fastner @ 1200mm c/c ( Max ).
62Material and labour for repair to existing false ceiling of any type with mineral fiber tiles having 8 mm thickness, of size 595mmx595mm tiles and refixing/repair of existing frame work with additional hanger, replacement of defective parts of aluminum frame work complete all as sepcifeid and as directed by Engr in Charge.Note:- Replacement of addintional member of frame work if required is also included in item rate
63S&F in repairs for solid PvC wall Lining consisting of 5mm thick wood grain PvC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. Make: Rajshree
64S&F solid repairs 5mm thick PvC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall with nails/screws to make PVC frame as per specification and drawing , complete all as specified and directed.
65Taking down existing aluminium doors/windows of size exc 1.5 sqm and re-fixing after tightening loose screw including replacement of unserviceable screw complete all as specified and directed.
66Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.
67M& L for 25 mm average thick Cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) levelling course finished even and without using extra cement etc Complete all as specified and directed.
68M&L Vitirified Ceramic Tiles light shade 7-8 mm thick (Square/Rectangular), Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tiles, laid over and including 15mm thick Screed Bed in CM 1:4,complete all as specified and as directed.
69Ditto as item no 70 but in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile and including of 10mm thick screed in CM (1:4), complete all as specified and directed.
70Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing rubbish outside defence land complete all as specified and directed.
71M/L Machine cut Pre-polished Kota stone slab flooring 18-20mm thick as in floor, mid landing of stair case over 15mm thick cement screed of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab etc complete.
72Note: The total amount shall subject to adjustment of credit of Rs 39355.00 for old Materials as per Schedule of Credit Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564908
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 20 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Certain B/R Repairs To Otm And Md Accn At Air Force Station Mullanpur Under Age (I) Highground Chandigarh
Basic Detail
Tender No AGE (I)/HG CHD/T-29/2026-27
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 01 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 20 Lakhs
Tender Fee 500
EMD 40000
Exemption Available
Document List
15tender2ndCallT29.pdf
bd12de2b-1d03-4002-9dc0-70f33717aebe.html
BOQ_896481.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

15tender2ndCallT29.pdf

html

bd12de2b-1d03-4002-9dc0-70f33717aebe.html

xls

BOQ_896481.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender