Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58564902

Tender For Special Repair Of Sensor Door At Afcme At Camero Complex

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
23.68 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
17 days left
EMD
47360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Of Sensor Door At Afcme At Camero Complex

BOQ

Name of Work:- SPECIAL REPAIR OF SENSOR DOOR AT AFCME AT CAMERO COMPLEX
Sl. No. Item Description
1Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc removing the debries outside the MOD land complete all as specified and directed.
2M&L for rendering CM (1:6) 10 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg in and removing the debries outside the MOD land complete all as specified and directed.
3M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed.
4M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 1mm thick elastomeric wall care putty on walls up to four storey height building complete and specified and as directed.
5M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty, up to four storey height building complete all as specified and directed.
6M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling up to four storey height building complete and all as specified and directed.
7M & L preparation of old plastered surface and applying two coats of white wash on ceiling up to four storey height buildingcomplete and all as specified and directed.
8Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed.
9Supply and fixing factory made uPVC white colour casement (openable.)door made of extruded profile with wall thickness of 2.3mm (+/- 0.2mm). Door profile with hollow section with multi chamber, frame(67mmx64mm). sash (65mmx108mm). T profile (One vertical length in between two shutters) (60mmx71mm)Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanised steel frame (28mmx21.5mrn) sash (31mmx27mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware: [ casement door handle both side made of zinc alloyed (while powder coated) Corner strikers: Cyilnder. Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder) and 5.5 mm thick glazing with selected quality glass. The unit rate quoated by contractor includes cost of glass,film and includes all and includes all other connected accessories & making good with which is required in PCC/RCC/plaster. Net opening will be measured for payment purpose (A) Area exc. 2.00 sqm each (b) uPVC frame, sash and mullion extruded profiles, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specificed and directed.
10Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed.
11M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in levelling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed.
12M&L for Vitrified Ceramic tiles light shade/ /double charge/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed.
13M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
14M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed.
15M&L for Glazed Coloured Ceramic tiles in vertical surface 350mmX450mmX6 to 7 mm thick set and joint in neat cement slury and pointed in white or colour cement to match the colour of the tiles, complete all as specified and as directed.
16S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets ,including fixing of hold fast in PCC 1:2:4 type B1 ( using 20 mm graded stone aggregate ) making good of disturbed portion including taking down old gate complete all as specified and directed.
17S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified.
18S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc complete all as specified and directed .
19Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed.
20S&F false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws including taking down false ceiling. The work shall be carried out as per specification, drawing complete all as specified and directed.
21S&F in Repair Dorma XL-C 4125 , 150 mm Hight 4mtr ( aprox ) Automatic Sliding Door Operator without Lock, with 2nos Motin Sensor, 1nos Saefty sensor, 1nos REMOTE, 2nos Glass Claps & All Mechanical parts; Max Opening Capability 2Mtr ; Max Wight 80Kg Both leavs . Al Specifed And As Manufecturer's Instructions. (i) DORMA XLC 8028 SOFT NOSE SEAL.(ii) INSTALLATION AND MAINTENANCE SERVICES .(iii) L CONNECTOR.(iv) FREIGHT
22S&F 12mm thickToughned glass as in hinged doors, partitions, sliding doors, automatic doors and similar work of approved brand and manufactures, including cutting to shape, drilling holes required, including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.Note:- Rate included all nessesry fitting and frame work for glass fitting, provision of top and bottom pivots, S/S handle, hinges, double action floor spring, stoppers etc. complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564902
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 23.68 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Of Sensor Door At Afcme At Camero Complex
Basic Detail
Tender No GE/SP/TOKEN-78/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 17 Nov 2026
Submission Date 07 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 23.68 Lakhs
Tender Fee 500
EMD 47360
Exemption Available
Document List
BOQ_895757.xls
cd784558-bf61-4676-bdcb-3f995e2ab618.html
TENDER78.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895757.xls

html

cd784558-bf61-4676-bdcb-3f995e2ab618.html

pdf

TENDER78.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender