Public Administrative Department Government Departments Closing in 7 days TDR #58564766

Tender For Development And Beautification Work Of The Statue Of Dr. Bhimrao Ambedkar Statue In Gram Panchayat- Baral ,Block- Baraut

Issued by Government Departments · baghpat, Uttar Pradesh
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
8500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
baghpat → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Development And Beautification Work Of The Statue Of Dr. Bhimrao Ambedkar Statue In Gram Panchayat- Baral ,Block- Baraut

BOQ

Name of Work:- Development and Beautification work of the statue of Dr. Bhimrao Ambedkar Statue in Gram Panchayat- Baral ,Block- Baraut
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR no. 2.8.1 All kinds of soil.
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR no. 4.1.8
3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R No. 6.1.1
4Centering and shuttering including stutting, propping etc. and removal of form. Foundation as per DSR SI No- 5.9.1
5Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)- All work up to plinth level : D.S.R.No. 5.1.2
6Centering and shuttering including stutting, propping etc. and removal of form. Columns, pillars as per DSR SI No - 5.9.6
7Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : D.S.R.No. 5.2.2
8Steel reinforcement for RCC work including straightening , cutting ,bending, placing in position and binding all complete. Dsr no 5.22.3
9Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R.No. 6.4.1
10Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8 mm thick (mirror polished and machine cut edge) Grenite stone of any colour and shade D.S.R.No. 7.38.1.1
11Providing & laying vitrified tiles 600X600 mm item no. DSR 11.49.2
12Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. D.S.R.No. 10.2
13Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). D.S.R.No. 10.28
1412 mm cement plaster of mix CEMENT PLASTER (IN COARSE SAND) 1:6 (1 cement: 6 coarse sand)
15Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.. D.S.R.No. 13.80
16Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) D.S.R.No.13.46.1
17Painting with synthetic enamel paint of approved brand & manufacture of required colour to give even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacture as per DSR no. 13.62.1
18Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). as per DSR no. 16.43.1
19Construction of granular sub base by providing well graded material spreading in uniform layers with Tractor mount grader on prepared surface mixing by mix in place method Tractor with rotavator at OMC,and compacting with Three wheel 80-100 KN Static Roller to achieve the desire density,complete as per technical specification clause 401. By Manual Means
20Providing and Laying of M-30 Gray colour Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.
21Supply of water proof painted Precast R.C.C. bench having sitting flat bench length 1.50 mtr, bench width 0.40 mtr, 50 mm thick, bench front total height 0.45 mtr, back support length 1.50 mtr, width of flat back support 0.35 mtr, 50 mm thick, total back height of bench 0.95 mtr, supported on two sides similar moulded approved design and shape R.C.C. legs having section 100mm x100 mm, fitted with nut-bolt. Using M-30 grade of Concrete and by using vibro compaction process. (AS PER APPROVED DESIGN AND SHAPE). Complete with all material and labour as per EIC.
22Supply & Fixing of Informatory Sign board at site including letter, writing, painting etc all comp at site. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564766
AUTHORITY Government Departments
TENDER VALUE 8.47 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Uttar Pradesh Small Industries Corporation Limited
Work Description Tender for Development And Beautification Work Of The Statue Of Dr. Bhimrao Ambedkar Statue In Gram Panchayat- Baral ,Block- Baraut
Basic Detail
Tender No 1416/EE1V/2026-27
Bidding Type Tender
Location
City baghpat
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 8.47 Lakhs
Tender Fee 590
EMD 8500
Exemption Not Available
Document List
382b4438-bad2-46d8-92f3-7a573a2cfdcb.html
BOQ_2296099.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

382b4438-bad2-46d8-92f3-7a573a2cfdcb.html

xls

BOQ_2296099.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender