Drinking Water Supply and Sanitation Government Departments Closing in 2 days TDR #58564592

Tender For Water Supply Scheme Salwah-Gutna

Issued by Government Departments · Poonch, Jammu and Kashmir
Tender Value
69.59 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
1.39 Lakhs
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Water Supply Scheme Salwah-Gutna

BOQ

Name of Work:- Water supply Scheme Salwah-Gutna
Sl. No. Item Description
1Pipes Works
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m inwidth) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil
3Refilling of Excavated soil back into trunches
4Providing and Laying / Fititng of G.I Pipes 15mm Dia
5Providing and Laying / Fititng of G.I Pipes 20mm Dia
6Providing and Laying / Fititng of G.I Pipes 25mm Dia
7Providing and Laying / Fititng of G.I Pipes 32mm Dia
8Providing and Laying / Fititng of G.I Pipes 40mm Dia
9Providing and Laying / Fititng of G.I Pipes 65mm Dia (M)
10Dismantling of GI Pipes including taking out pipe from alignment earthwork and refilling of surplus soil back to trenches- 15mm dia
11Dismantling of GI Pipes including taking out pipe from alignment earthwork and refilling of surplus soil back to trenches- 20mm dia
12Dismantling of GI Pipes including taking out pipe from alignment earthwork and refilling of surplus soil back to trenches- 25mm dia
13Dismantling of GI Pipes including taking out pipe from alignment earthwork and refilling of surplus soil back to trenches- 32mm dia
14Dismantling of GI Pipes including taking out pipe from alignment earthwork and refilling of surplus soil back to trenches- 40 mm dia
15Laying Fitting of GI Pipes excluding cost of pipe and earthwork- 15 mm dia
16Laying Fitting of GI Pipes excluding cost of pipe and earthwork- 20 mm dia
17Laying Fitting of GI Pipes excluding cost of pipe and earthwork- 25 mm dia
18Laying Fitting of GI Pipes excluding cost of pipe and earthwork- 32 mm dia
19Laying Fitting of GI Pipes excluding cost of pipe and earthwork- 40 mm dia
20Labour engaged for cutting, Bending , Rethreading of GI Pipes : Fitter
21Labour engaged for locationg ,tracing of Blockages including excavation of pits : Mazdoor
22Welding of Joints bt Electric arc Welding including testing and commissioning of joints includes carriage if set and all other accessories including making arrangement for electric supply /arrangement for generator etc. Complete job
23Making interconnection of GI distribution branch with GI main by providing and fixing tee,union incl. cutting and threading of pipe etc. complete 25mm to 40mm
24Making interconnection of GI distribution branch with GI main by providing and fixing tee,union incl. cutting and threading of pipe etc. complete 50mm to 80mm
2580 mm / 65mm dia Sluice/valve NRV CI of class 1
2680 mm / 65mm dia Check/valve NRV (with cap) CI of class 1
27Providing and Fixing of GM gate valve of approved Quality 20mm
28Providing and Fixing of GM gate valve of approved Quality 25mm
29Providing and Fixing of GM gate valve of approved Quality 32mm
30Providing and Fixing of GM gate valve of approved Quality 40mm
31Providing and Fixing of GM gate valve of approved Quality 65mm
32Providing and Fixing of GM gate valve of approved Quality 80mm
33Providing and Fixing brass ferule with C.I Mouth cover including buring and tapping the main
34Providing and Fixing of brass bib cock approved Quality
35Civil Work
36Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.1 All kinds of soil
37Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.1 All kinds of soil
38Fill available excavated earth (excluding rock)in trenches , Plinths, sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layer excluding ramming and watering lead up to 50 m and lift up to 1.5 M
39Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work up to plinth level1:4:8 (1 cement: 4 Coarse sand: 8 graded stone Agg. 40 mm nominal size) Crushed
40Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work up to plinth level1:3:6 (1 cement: 3 Coarse sand: 6 graded stone Agg. 40 mm nominal size) Crushed
41Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used asper design mix is contentconsidered payable or recoverable separately.1 All works upto plinth level
42Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
43Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level
44Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate
45Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete
46Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as perapproved design mix, including pumping of concrete to site of laying but excluding thecost of centering, shuttering, finishing andreinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used asper design mix is content considered payable or recoverable separately.
47Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
48Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate androofs having slope more than 15° upto floor five level level including curing but excludingthe cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
49Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approvedsteel primer. Using M.S. angles 40x40x6mm for diagonal braces
51Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth leveCold twisted bars
52Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Welded
53Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms
54Edges of slab
55Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
56Centering and shuttering including strutting, propping etc. and removal of form for:Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc.
57Centering and shuttering including strutting, propping etc. and removal of form for:
58Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
59Extra F/Work for Foundation footing
60Extra F/Work for Foundation Wall
61Extra F/Work for Foundation Beam
6215mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 4 ( 1 cement : 4 fine sand)
63Extra for Plaster in Circle Work
64Painting of steel work
65Providing and fitting concealed intemal Electnfication of room including 4 Nos LED lights, Fan points 2 No, Fuse box 1 No., 2 no 15 Amp sockets with switch, 5 Amp 2 no. sockets with switch - of approved brand and 04 nos LED security ights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line up to a length of 10 meters.
66Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm)
67Supplying and applying bituminous solution primer on roof and or wallsurface at 0.24 litre per sqm.
68Extra for water proofing material 01kg per 50kg cement is = 115 bags @ 57.90 per kg
69Providing and fixing S.CI.I & S 100 mm dia bend 8 no @265.0 /No . Providing and fixing 100 mm Slotted cowl ( Terminal Guard) S.C.I .S & S 4 No @ 264.0/No
70Carriage of cement average distance 30 Km by M.T and 1.5 KM by head load
71Carriage of steel average distance 30 kM by M.T and 1.5 km by head load
72Carriage of sand average distance 50 Km by M.t and 1.5 km by manual labour by Head Load
73Carriage of stone aggregate average distance 30 Km by M.t and 1.5 km by manual labour by Head Load
74Carriage of Brick by manual labour average distance 1.50 Km by Head Load
75Carriage of Brick 240 KM from source to site of work by Mechanical Transport
76Mechanical Work
771 Centrifugal pump set 4000 GPH X 350 Mtr. Head (INO.) as per IS160 reputed make Horizontal Centrifugal Pump set along with allied works. The HC pump sets should be mounted on respective baseframes fabricated out of M.S channel Of suitable Size and duly fitted with T type foundation bolts, nuts and washers to make the pumping units vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment for proper balancing of the Pump motor set, with the help of level indicators. Job includes laying of RCC foundation blocks for HC pump sets as per size of foundation plate. Construction offoundation blocks by way of excavating the trenches of required size and disposing Off the excavated material to a suitable location outside the premises. Providing and Fabricating a Iomm dia steel bar mesh and fixing the base frame on the steel mesh and raising theheight Of block upto one feet above ground level and proper levelling/ finishing the alleviated portion of the foundation block. Fabrication of 06 nos. new Foundation bolts 3 feet height for the HCP. These foundation bolts are to be fixed in the base frame andwelding/fixing it with tor steel mesh at appropriate places. Providing and laying Of plain cement concrete in the ratio of by using 40mm size aggregate for a height of 150 mm with proper compaction. providing and laying Of reinforcement cement concrete in the ratio of for a height Of 1.17 mtrS. by using 20/10 mm size aggregate. The Size Of RCC foundation block should be minimum 4 inches and not more than 8 inch above the floor level. The block shall be filled with rich mixture of concrete using vibrator for compaction. The entire block as one unit is to be laid in such a waythat it can damp all types Of mechanical vibrations created by dynamic load of pumping unit as well as to the block itself. Fixing Of base frame after levelling and fastening with foundation bolts. Curing of foundation block. ProvidinÜFabrication/laying of suction and delivery manifolds outside pump rooms . Suction and delivery size of pipe should be of as per the design of pump. Suction lines of all the pumps should be connected to the respective Suction manifolds Of size 150 mm dia. Pipe with welding work in double layerusing reputed make electrodes to form strong and leak proof joints,'and also a sluice valve of suitable dia should be fitted between sumptank and the suction manifold using MS flanges, gaskets, nuts andbolts. Also delivery lines Of all the pumps should be connected to therespective Delivery manifolds of size 150nmm dia. Pipewith weldingWork in double layer using reputed make electrodes to form strongoints and also a sluice valves and reflux valve o Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564592
AUTHORITY Government Departments
TENDER VALUE 69.59 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Public Health Engineering Department
Work Description Tender for Water Supply Scheme Salwah-Gutna
Basic Detail
Tender No enit no 08 of 2026_27
Bidding Type Tender
Location
City Poonch
State Jammu and Kashmir
Key Dates
Publish Date 17 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 69.59 Lakhs
Tender Fee 1100
EMD 1.39 Lakhs
Exemption Not Available
Document List
a79aeb0e-198e-426e-ab70-b1759cdb2521.html
BOQ_1124830.xls
SalwahGutnamechEstimate.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

a79aeb0e-198e-426e-ab70-b1759cdb2521.html

xls

BOQ_1124830.xls

pdf

SalwahGutnamechEstimate.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender