Housing Urban and Rular Development Government Departments Closing in 10 days TDR #58564560

Tender For Construction Of All Women Police Station With Development Work At Pennagaram In Dharmapuri District Under Honble Cms Announcement In The Assembly During The Police Demand For The Year 2026-2027 Held On 03.09.2026.

Issued by Government Departments · Dharmapuri, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
87900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of All Women Police Station With Development Work At Pennagaram In Dharmapuri District Under Honble Cms Announcement In The Assembly During The Police Demand For The Year 2026-2027 Held On 03.09.2026.

BOQ

Name of Work:- Construction of All Women Police Station with development work at Pennagaram in Dharmapuri District under Honble CMs announcement in the assembly during the Police Demand for the year 2026-2027 held on 03.09.2026.
Sl. No. Item Description
1EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers well watered rammed and consolidated and depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified here under etc. complete in all respects complying with relevant standard specifications. (Including Refilling)EW-AS-NC-IR-2m) a) 0 to 2 mt.
2EW-AS-OC-ER) Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant Standard specifications (Excluding Refilling).EW-AS-OC-ER-2m) a) 0 to 2 mt.
3EW-AS-OC-ER-3m) b) 2 to 3m depth.
4EW-AS-Dr-ER) Earth work excavation for Open Foundation for drains in all soils and subsoils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and leveling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant standard specification (Excluding Refilling) (Drain having bed width upto 1.25 metre).EW-AS-Dr-ER-2m)a) 0 to 2m depth.
5ST-FB&S-PC-AT) Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for curing antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls. The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide. “Chloripyrifos” and spraying the same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II)/ 1981 and as directed by the departmental officers.
6FL-FB-SCS) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of supplying filling crushed stone sand.
7FL-FB-HBSJ-40mm) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, labour charges, etc., all complete and as directedby the departmental officers.
8FL-FB-HBSJ-20mm) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, Labour charges etc., all complete and as directed by the departmental officers.
9FL-FB-EA) Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick well watered rammed and consolidated complying with relevant standard specification etc., all complete and as directed by the departmental officers.
10RW-WBM-GSB-Gr-I) Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900.
11FL-FB-GR) supplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications including cost of supplying gravel and as directed by the departmental officers.
12RW-PB-D-RMH) Supplying and fixing of Rubber Moulded Hydraulic Pressed Paver Bloc of approved quality and make of building front and back side including cost of materials and conveyance of paver blocks and labour charges for laying to proper level, slope etc., all complete and as directed by the departmental officers. ( Design and colour should be got approved from the Executive Engineer before use.RW-PB-D-RMH - 83)a) 83mm thick
13CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.
14CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly excluding shuttering and centering but including laying, curing and finishing with relevant standard specifications in foundation and basement, and other similar works & as directed by the departmental officers.
15CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the Departmental officers.
16CN-F&S-PCS-M20-20/40) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 for the following thickness excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position complying with relevant standard specifications etc., complete in the following floors (Measurement will be taken including bearing in wall also)CN-SS-PCS-M20-20)I. 20mm thickCN-SS-PCS-M20-20-(GF)a) In Stilt / Ground Floor
17CN-SS-PCS-M20-20-(1F)b. In First floor
18CN-F&S-PCS-M20-40)II. 40mm thickCN-FB-PCS-M20-40)a) In Foundation and Basement
19CN-SS-PCS-M20-40-(GF)b) In Stilt / Ground Floor
20CN-SS-PCS-M20-40-(1F)c) In First Floor
21CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cum) 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670Kg of crushed stone sand (for making 10 cum) but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra etc., complete complying with relevent standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with requirements of IS standards. (No separate payment will be made by the Departmental for the excess usage of materials)CN-FB-RCC-M20)a) In Foundation and Basement
22CN-SS-RCC-M20-(GF)b) In Stilt / Ground Floor
23CN-SS-RCC-M20-(1F)c) In First Floor
24CN-SS-RCC-M20-(2F)d) In Second Floor
25CN-RWH-P/AG-M20) Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth and filling with stone jelly of 40mm size including earth work excavation 1m dia, 600mm depth and filling with filling sand to a depth of 300mm filling sand over the stone jelly and covered with Precasted slab Standardised Cement concrete M20 grade of 40mm thick excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position etc and all complete as directed by the departmental officer.CN-RWH-P-M20)a. Providing pit
26CN-RWH-AG-M20)b. Augering 30cm dia
27CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) with secondary reinforcement fibre of approved quality at 0.25% by weight of cement (125gm of fibre for 1 bag i.e., 50Kg of cement) used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers. (The shape of slab and brand and quality of fibre should be got approved from the Executive Engineer before use)
28BW-FB-FLB-CM 1:5) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete with relevant standard specifications.
29BW-MW-FLB-CM 1:6) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-SS-FLB-CM 1:6-(GF)b. In Ground Floor/Stilt floor
30BW-SS-FLB-CM 1:6-(1F)c. In First floor
31BW-SS-FLB-CM 1:6-(2F)d. In Second floor
32BW-PW 110mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors including labour for fixing doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-PW 110mm FB-FLB-CM 1:4)a. In Foundation and basement
33BW-PW 110mm SS-FLB-CM 1:4-(GF)b. In Ground Floor/Stilt floor
34BW-PW 110mm SS-FLB-CM 1:4-(1F)c. In First floor
35BW-PW 110mm SS-FLB-CM 1:4-(2F)d. In Second floor
36BW-PW 70mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors including labour for fixing doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-PW 70mm SS-FLB-CM 1:4-(GF)b. In Ground Floor/Stilt floor
37BW-PW 70mm SS-FLB-CM 1:4-(1F)c. In First floor
38FA-EJ-FP-BIT) Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make inclusive of conveyance charges, cutting the pad to the required size, cost of materials and labour charges for fixing in position wherever necessary for all floors etc., complete and as directed by the departmental officers.
39CN-FL-PCC-1:5:10) Flooring with a bed of Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers.
40PL-FL-CM 1:4-20mm) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including surface rendered smooth including providing proper slopes, thread lining, curing and 150mm wide skirting alround with the same cement mortar etc., complete in all respects.
41CN-FL-Ellis-Chip) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand) and surface rendered smooth including 150mm wide skirting, providing proper slopes, thread lining, curing etc.. complete in all floors complying with relevant standard specifications.
42CN-TEC-WC-NS) Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab with proportion of brick jelly to lime (fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters for giving the required slope and thickness complying with relevant standard specification and as directed by the departmental officers.
43TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., as per standard specifications. (The quality of tiles shall be got approved from the Executive Engineer before use)
44TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), including curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use)
45TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use).
46TL-FL-IVT-CM 1:3) supplying and fixing of vetrified tiles of best approved quality (ivory) 600x600x8mm for flooring and other similar works (the colour and shade shall be got approved from the executive engineer before using) over cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers.
47TL-FL-CDT-CM 1:3) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick, including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with White/colour cement, finishing, curing etc complete and as directed by the departmental officers. (The brand and quality of tiles should be got approved from Executive Engineer before use ).
48TL-FL-GS-CM 1:3-(GF)) Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers. (The brand and quality of tiles should be got approved from Executive Engineer before use ).TL-FL-RGS-CM 1:3)b. Ruby Red, Raw Silk
49Construction of Leach pit arrangements including cost of earth work, C.C(1:8:16)using 40mm HBS, B.W. IN C.M(1:6) using country bricks, dry brick work, sand, filling 40mm & 20mm size metal with required depth, plastering woth CM 1:5, 12mm thick, 100mm S.W. Tee, R.C.C.(1:2:4) for petty works and PCC 75mm top cover slab and labour charges etc., all complete and as directed by the departmental officers.
50FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cm x 60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the R.C.C works etc., complete complying with standard specifaction and as directed by the departmental officers.FW-FB-WOS-FB)a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,
51FW-SS-WS-PS)b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works
52FW-SS-WS-CO)c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.
53FW-SS-WS-CS)f.Curved surface
54PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete in all respects and complying with relevant standard specifications.
55PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., complete in all respects and complying with standard specifications.
56PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors finished with neat cement including hacking the areas, providing band cornice, scaffolding, curing etc., complete in all respects and complying with standard specifications.
57PL-WPC-CM 1:3-12mm) Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% by weight of cement for sump including scaffolding curing, finishing etc., complete in all respects and complying with standard specifications.
58PL-OU-CM 1:5-Bor) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors for elevation purposes, scaffolding, curing, finishing etc., all complete.PL-OU-CM 1:5-150mm)a) 150mm wide border
59PL-OU-CM 1:5-75mm)b) 75mm wide border
60PL-OU-CM 1:5-50mm)c) 50mm wide border
61PA-CE-WW-SL 3C) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects.
62PA-IN-WP-2C BPC) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade, the paint should be supplied by the contractor at his own cost (The quality and the shade of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications.
63PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.
64PA-IN-WP-1CP BWP) Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls including cost of putty, brushes, watering, curing, labour charges for applying putty, blade etc., complete as directed by the departmental officers. (The quality and brand should be got approved from the EE before use.)
65PA-IN-PEP-2C BPC) Painting the false ceilling / New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, putty etc., complying with relevant standard specification. (The paint should be supplied by the contractors at his own cost.The quality and shade of the paint should be got approved from the Executive Engineer before use.)
66PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc., all complete as directed by the departmental officers (Paints and its shade should be got approved from the Executive Engineer before using)
67PA-IN-MP-2C EP) The new wood work with two coats of best melamine polish/varnish of approved quality and brand including preparation of surface etc.. The rate is inclusive the cost of all material, labour charges and finishing neatly etc., complete complying with standard specification and as directed by the departmental officers.
68JN-WR-TWF-WRF) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc. , including labour charges for fixing hold fasts, complying with relevant standard specifications etc., in all respects.JN-WR-TWF-A 2m F)a. T.W. over 2 m & below 3 m
69JN-WR-TWF-B 2m F)b) Teak wood below 2 m length
70JN-D-DC-M) Supply and fixing of best approved superior variety magnetic door catches suitable for doors including cost of door catches, Aluminium/ Stainless steel screws fixing in position, etc., complete and as directed by the departmental officers. (The quality and brand shall be got approved from the Executive Engineer before use)
71JN-D-MS-HF) Supplying of mild steel hold fasts horizontally twisted of size 230x40x4mm with pair of suitable iron screws.
72JN-V-UPVC-LV) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators
73JN-UPVC W-UPVC-OP W) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)
74JN-WPC D-SL-D) Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side. The complete door must be homogeneously made to avoid any disfigurement in the appearance. The door shall be of minimum 25mm Thick and be 550 KG/Cu.Mtr of density, i.e 1.28 KG per sq. Feet. And The solid door frame extruded with size 75MM x 50MM with minimum Density 800 Kgs / Cub. Mtr. The door must be hinged with minimum of 3 Nos of 5 Inch Hinges and the frame shall be fixed onto the wall with a minimum of 4 Nos. of 8MM x 100MM long Fastener Screw fitted with polymeric nylon sleeve. The Door shall have all ISI hardware including 3 Towerbolt in front & back together, 2 Handles in either side etc. all complete in all respects as directed by the departmental officers. (The colour, brand and quality of window should be got approved from the Executive Engineer before use)
75JN-BWR D-SL-Ply-2.1H) Supplying and fixing of single leaf door shutters by using Best Indian T.W. door shutters with 9mm thick phenol bonded BWR grade plywood as per IS 303-1989 (General) with IS 5539-1969 (for preservative treatment) and IS 848-1974 (for adhesives) with relevant IS specifications and its latest amendment for shutters with 75mm x 37.50 mm teak wood styles and 3 Nos. of 150 mm x 37.50 mm TW rails (top, bottom and lock rails) using the above panel including labour for fixing in position , cost of materials, Aluminium Furniture fittings such as 3 Nos. of 5” of Aluminium butt hinges, 2 nos. of 10”x1/2” Aluminium Tower bolt, 1 No of 12'x5/8' Aldrop, 1 No of 6' door handle with CP screws, Rubber Bush 40mm dia & 60mm long, 1 No of Alu.Door stopper of best approved quality shade etc., all complete & as directed by the departmental officers. (The quality of BWR plywood should be got approved from the Executive Engineer before use.)JN-BWR D-SL-Ply-0.9x2.1)b) 900 x 2100 mm
76JN-BWR D-SL-Ply-1x2.1)c.1000mm x 2100mm
77JN-TWPD-DL-75mm S-BF-2.1H) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 2 Nos of 6\\" majestic door handle , 6 Nos of 6\\" Butt hinges, 4 Nos 8\\"x1/2\\" Tower bolt, 1 No mortic lock with handle, 2 Nos Nylon bush and 2 Nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers.JN-TWPD-DL-75mm S-BF-1.2x2.1)b.1200mm x 2100mm with Brass fittings ( Double leaf)
78JN-TWPD-DL-75mm S-BF-2.1H) Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 2 Nos of 6\\" majestic door handle , 6 Nos of 6\\" Butt hinges, 4 Nos 8\\"x1/2\\" Tower bolt, 1 No 10\\"x5/8\\" aldrop, 2 Nos. Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers.JN-TWPD-DL-75mm S-BF-1.8x2.1)d. 1800X2100mm with Brass fittings ( Double leaf)
79JN-SC D-SL-FLS-2.1H) Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989, the cross band and face veneers are to be banded with phenol formaldehyde synthetic resin in hot press both sides and manufacturing the shutter by using quality timber of termite proof and seasoned to moisture content not more than 10%, hot pressed with hydraulic press at a temperature of 150o to the norms as per IS 2002-1983 and TW Ply on Both side with teak wook lipping around, 35mm thick including cost and fixing of Aluminium furniture fittings such as 3 nos 5” butt hinges, 2 Nos 6'x1/2' Tower bolt, 2 Nos 6' Handle with CP screws, 1 No of 10'x5/8' Aldrop, 1 No 40mm dia & 60mm long rubber bush , 1 No of Door stopper with rubber bush, Brass screws and labour charges for wrought and putup and fixing in position of flush shutters and painting the TW portion with two coats using varnish two coats and as directed by the departmental officers. (The quality and brand of materials should be got approved from the Executive Engineer before use.)JN-SC D-SL-FLS-0.9x2.1)b.900mm x 2100mm
80JN-SC D-SL-FLS-1x2.1)c.1000mm x 2100mm
81MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete
82MW-HR-SS-SH) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
83JN-SD-MS-Lok) Supplying and fixing of steel doors with MS flat of size 50mmx10mm alround and the panel shall be provided with 9 nos, of MS square bars of size 20mmx20mm equally spaced and welded with the alround MS angle with 3 nos. of horizontal stiffener using MS flat of size 50mmx6mm which shall also be welded with the alround ms flat the iron bars shall be backed with the weld mesh of size 75mmx25mm of 10g. and flying mesh of size 10mmx10mm of 10g and the same is to be vertical with the alround MS flat and 2 nos. of vertical stiffener and 4 nos. of horizontal stiffener using MS flat of size 25mmx6mm including the cost of hinges, welding charges and locking arrangement as per the norms provided etc., all complete and as directed by the departmental officers.a) 1000 X 2100mm (Lockup Door)
84JN-V-MS-OP V) Supplying and fixing of steel ventilator with lron bars & MS flat of size 50x10mm alround and the panel shall be provided with 12Nos. of MS square bars of size 20x20mm equally spaced and welding the same with the alround MS flat of 25 x 6mm and backed with the weld mesh of size 75 x 25mm x 10G and flying mesh of size 10 x 10mm of 10G and welded with alround MS flat including cost of hinges, welding charges ect., all complete and as directed by the departmental officers.JN-V-MS-OP V-1.2x0.8)d) MS Ventilator - 1200mm x 800mm
85RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., all complete and as directed by the departmental officers.
86IN-CBD-WP-LS) Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
87RW-KS-CC 1:3:6-PC) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers.
88WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specials such as gratings, shoes, bends, offsets conforming to IS 14735 including jointing with seal ring conforming IS 5382 with leaving a gap about 10mm to allow thermal expansion with necessary clamps, teak wood plugs, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc., complete complying with relevant standard specifications. (The quality and brand of fittings should be got approved from Executive Engineer before use).WS-EX-RWD-PVC 110b. 110mm dia PVC SWR pipe
89WS-IN-S-CI) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each) including cost of material labour charges for fixing etc., all complete and as directed by the departmental officers.
90WS-IN-HCP-LBT) Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use).
91WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use).
92WS-EX-CI-Man-60 x 60) Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., all complete and as directed by the departmental officers.
93WS-IN-HW-20 FC) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the departmental officers.WS-IN-HW-20 GI)a. 20mm dia G.I. pipe
94WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped of masonry etc., as directed by the departmental officers.WS-EX-ASTM-32 PVC)a) 32mm dia
95WS-EX-ASTM-25 PVC)b) 25mm dia
96c) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
97SA-IN-PVC EC-32) Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS, connected to the sink and wash basin waste water pipe line etc. all complete complying with relevant standard specifications and as directed by the departmental officers. (the quality and brand should be got approved from the E.E. before fixing)
98WS-IN/EX-MS-Dia) Supplying and fixing of MS pipe with suitable dia and 3.6mm thick including cost of all materials and all labour charges etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from EE before use)
99WS-Ex-DBW-HR) Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole etc., and including transporting charges for the rig and supporting vehicles from one place to another place including hire and fuel charges as directed by the departmental officers.WS-Ex-DBHR-150)a) Upto 150m depth ending below Ground level
100WS-Ex-DBHR-180)b) From 151m upto 180m depth ending below Ground level
101WS-Ex-DBHR-210)c) From 181m upto 210m depth ending from Ground level
102WS-Ex-DBHR-240)d) From 211m upto 240m depth ending from Ground level
103WS-Ex-DBHR-270)e) From 241m upto 270m depth ending from Ground level
104WS-Ex-DBHR-300)f) From 271 m upto 300 m depth ending from Ground level
105WS-Ex-CM-Dia) Supply and delivery of following dia PVC casing pipies without excise duty as per IS 12818/2010 of approved quality for bore wells with average wall thickness of 8.0mm and inter / outer threaded ends with slots in standard length of 1m to 8mm both in horizontal and vertical cutting including transporting charges to site of work and all other taxes etc., all complete and as directed by the departmental officers (The pipes and specials quality and brand should be got approved by the EE before laying)WS-EX-CM-150)a. 150mm dia Casing Medium pipes
106WS-Ex-LCCP-Dia) Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved etc., all complete complying with relevant standard specifications and as directed by the departmental officers. (The quality and brand should be got approved from the Executive Engineer before using.)WS-Ex-LCCP-150)a. 150mm dia casing pipes
107WS-Ex-PVC EC-160) supplying and fixing of 160mm dia pvc end cap for borewell casing pipe of approved brand etc., all complete and as directed by the departmental officers (the quality and brand of pvc end cap should be got approved by the executive engineer before use)
108WS-Ex-DOL-TPPB) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). For 3 HP
109WS-Ex-DOL-TPPB) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). For 5 HP
110WS-Ex-LC-S BW/OW) Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.Upto 5 HP
111WS-Ex-BWSM-TP) Supply and delivery of clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % etc. complete complying with relevant standard specifications and as directed by the departmental officers. (The quality and brand should be got approved from the Executive Engineer before use)WS-Ex-BWSM-50 x 175) 50 lpm x 175 m
112WS-Ex-OWSM-TP) Supply and delivery of Open well Submersible pump set without panel board conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.WS-Ex-OWSM-50 x 50)50 lpm x 50 m
113WS-Ex-FCC-3c) Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor etc., all complete and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) WS-Ex-FCC-3x4)c) 3 core 4 sq.mm flat type copper cable
114WS-IN/EX-PVC/UPVC/CPVC/GI/CI/-AGL) Supplying, laying and jointing the following dia of (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) / GI Pipes) Pipes with ISI mark of best approved quality including labour charges for cutting, threading jointing the pipes wherever necessary wrapping the pipes with taflon tape and fixing the same with clamps and screws on walls etc. all complete complying with relevant standard specifications and as directed by the departmental officers.(Above Ground Level)WS-IN/EX-GI-BC) GI Pipes B ClassWS-IN/EX-GI-50) f. 50mm dia GI Pipe
115WS-IN/EX-GI-65) g. 65mm dia GI Pipe
116WS-IN/EX-PVC/UPVC/CPVC/GI/CI/-BGL) Supplying, delivery laying and testing of following dia (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) / GI Pipes) pipes of approved ISI quality Below Ground Level including earth work excavation, cutting, threading, laying, jointing, aligning to proper gradient lowering in trench, conveying the pipes and specials, cost of pipes and specials solvent cement resin, sand paper, barricading, pumping, dewatering to watch and ward and cost of labour etc., all complete (the pipes and special quality and brand should be got approved by the EE before laying) WS-IN/EX-GI-50) f. 50mm dia GI Pipe
117WS-IN/EX-GI-65) g. 65mm dia GI Pipe
118WS-EX-ASTM-50 PVC)d) 50mm dia ASTM pipe
119WS-Ex-UPVC CP-CP) Supplying of following dia upvc column pipe for borewell including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the quality of upvc column pipe should be got approved from the executive engineer before use)WS-Ex-UPVC CP-32)b. 32mm Column Pipe
120WS-IN/EX-Spl PVC/UPVC/CPVC/GI/CI/GM/MS/SS-Dia) Supply and fixing of following dia PVC / UPVC / CPVC / GI / CI / GM / MS / SS Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality of the Specials should be got approved from EE before use)WS-IN/EX-GI EL-32)d. 32 mm Dia GI Elbow
121WS-IN/EX-GI Cu-32)d. 32 mm Dia GI Coupler
122WS-IN/EX-GI B-65)g. 65mm Dia GI Bend
123WS-IN/EX-GI Un-50)f. 50mm Dia GI Union
124WS-IN/EX-UPVC Un-50)f.50 mm Dia UPVC Union
125WS-IN/EX-UPVC HN-50)f. 50mm Dia UPVC Hex Nipple
126WS-IN/EX-GM GV-50)f.50 mm Dia Gun Metal Gate Valve
127WS-IN/EX-MS CS-150) l.150 mm Dia MS Clampset for borewell
128Supplying and delivery of 50mm dia SS adopter with ISI mark of best approved quality etc., all complete and as directed by the departmental officers.
129WS-IN/EX-PVC/UPVC/CPVC/GI/CI/-BGL)Supplying, delivery laying and testing of following dia (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) / GI Pipes) pipes of approved ISI quality Below Ground Level including earth work excavation, cutting, threading, laying, jointing, aligning to proper gradient lowering in trench, conveying the pipes and specials, cost of pipes and specials solvent cement resin, sand paper, barricading, pumping, dewatering to watch and ward and cost of labour etc., all complete (the pipes and special quality and brand should be got approved by the EE before laying)WS-IN/EX-PVC-25)c. 25mm dia
130WS-EX-ASTM-50 PVC) Supplying, laying, fixing and jointing the following dia HDPE Pipe 10kg/cm2 of best approved quality with ISI mark ISI suitable for borewell including cost of pipe, specials like elbow, tee, reducer, plug, bend, coupler nipple clamps etc., all complete complying with relavent standard specification and as directed by the departmental officer (The brand and quality of materials should be got approved from the EE before use)WS-Ex-HDPE-32) a) 32mm dia HDPE 10kg/cm²
131WS-Ex-Ny R-BW) Supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell and as directed by the departmental officers (the quality of nylon rope should be got approved by the executive engineer before supply)
132SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories such as powder coated cast iron brackets, 32mm dia C.P. waste coupling, Rubber plug and aluminium chain, 32mm dia B class G.I. / PVC waste pipe, Angle Valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap & required grating etc., complete in all respects (wash hand basin shall be got approved by the Executive Engineer before fixing).SA-IN-WB-WWOP)b) White without pedastal wash hand basin
133SA-IN-VSC-PVC) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap 10mm to allow thermal expansion and fixing the pipes into walls or over the septic tank with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers. a) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials etc., all complete.
134SA-IN-GT-CB) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 114 mm thick using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm) in CM 1:5 (One of cement and five of crushed stone sand ) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers.
135SA-IN-NT-PVC) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete
136SA-IN-IWC-GF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, including concrete packing, filling portion with earth, flooring the area with 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of curshed stone sand and sixteen of brick jelly) using 40mm size brick jelly and top left rough to receive the floor plastering but including Mortar Plasticizer (Liquid) at 200ml per bag, anti-syphonage connection, curing, etc. all complete and as directed by the departmental officers. In Ground floor.
137SA-IN-IWC-OGF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, including concrete filling the sunken portion with brick jelly lime concrete proportion of brick jelly to lime being 32:12½ by volume (32 CFT of 20mm gauge brick jelly and 12 ½ cft of slaked lime) (No sand) and top 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly including plastering the sides of sunk portion in CM 1:3 (one of cement and three of crushed stone sand) 12mm thick mixed with water proofing compound at 2Kg / m2 and top left rough to receive the floor plastering but, antisyphonage connection, one coat of bitumen for the sides , bottom and curing and including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete in all floors. (Other than ground floor)
138SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap including cost and fixing of double flapped coloured plastic sheet cover PVC flushing cistern in appropriate level as directed by the departmental officers at a maximum level of 5’6” and of approved brand of 10litres capacity including fittings such as CI brackets. PVC connection GM wheel valve, Hex nipple, etc., complete (Th Quality and brand of EWC and plastic cover shall be got approved from the Executive Engineer before fixing)
139SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary UPVC special clamps, wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers.SA-Ex-SWR P-110)a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
140SA-Ex-SWR P-75)b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
141SA-Ex-SWR P-50) Supplying,laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` for waste water line with relevant specials conforming to IS 14735 including jointing and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers.
142SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water, including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are jointed and laid to proper gradiant to the alignment as directed by the departmental officers. (SN8 SDR 34 (S16.5), as per IS 15328/2003, should be got approved by the EE/SE/CE before use in works)SA-Ex-SN8-110)a. 110 mm UPVC Non Pressure pipe
143SA-Ex-PVC B-Dia) Supplying and fixing of following dia PVC Bend as per IS 10124/1982 Part II with superior variety for joining the pipe in suitable and necessary places, laid to proper gradient including cost of materials & labour charges etc., complete and as directed by the departmental officers. (The brand and quality of should be got approved from EE before use ).SA-Ex-PVC B-110)a. 110 mm dia PVC bend 6 KSC
144SA-Ex-SFRC-S) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty with 10 Ton capacity including of all cost etc., all completed and as directed by the departmental officers.SA-Ex-SFRC-600 x 600)b. 600mm x 600 mm
145IN-FT-RR-M) Supplying and fixing of following rooms fittings including cost of materials with screws, TW plugs and labour charges for fixing in position etc. complete in all respects and as directed by the departmental officers.IN-FT-Alu HR-20mm) Supplying and fixing of 20mm dia aluminium hanger rods to the required length
146IN-FT-Alu TR-75cm) Supplying and fixing of Aluminium Towel Rail of 75cm long
147IN-FT-Alu CS-5P) Supplying and fixing of Aluminium plate with five pin for Coat Stand
148IN-FT-IC PH-8 G) Providing and fixing iron Chromium plated 8 gauge Picture hook
149IN-FT-BM-PVC) supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size shelf type mounted in the PVC/ FIBRE GLASS FRAMED with necessary hard board backing including labour for fixing in position etc., complete and as Directed by the Departmental officers.IN-FT-BM-500x400) a) 500x400x5.5mm shelf type mounted
150LW-TP-TP-T) Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth and filling with river sand and red earth mix in the ratio of 1:1 for 40cm depth in the same pit and planting the avenue trees of approved varities to a height of 200cm from the ground level and maintaining them for the period of 6 month including watering, periodical manuring and replacing the avenue trees if dead etc all complete and as directed by the departmental officer. (Tree sappling shall be got approved from EE before planting).
151LW-TP-TG-Tri S) Supplying and fixing of triangular shape chicken mesh tree guard using 8cm dia casurina vertical post and middle tie using country wood reeper of size 50x25mm and 25 gauge chicken mesh including labour charges for fixing the triangular tree guard and as directed by the departmental officers
152EL-IN-EP-LP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete.EL-IN-EP-WCR)a) Light point with ceiling rose
153EL-IN-EP-WOCR)b) Light point with bakelite battern type holder
154EL-IN-EP-CB)c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.
155EL-IN-EP-FP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for FAN POINT controlled by 5 amps flush type switch including circuit mains cost of all materials specials etc., all complete.
156EL-IN-EP-SLP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for Stair case light point controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete.
157EL-IN-EP-SBI) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., all complete
158EL-IN-EP-CP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials, etc., all complete
159EL-IN-EP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable size PVC box (Fire retraded box) of required thickness concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials.
160EL-IN-EF-ES) Providing Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 38 mm dia and 0.15 m of 19 mm dia B Class. GI pipe including earthwork excavation, brickwork in cement mortar, plastering, 38 mm trench RCC cover for the brick masonry, 19 mm GI Check nuts, bolts, washers, GI bend, reducer, coupling, funnel with wire mesh of 12.5 mm dia, copper plate 125 mm x 50 mm x 6 mm ( 0.36 kg ), including 1 bag ( 40 kgs ) charcoal, salt 10 kg including cost of all materials and labour,etc all complete as per relevant standard specification and as directed by the departmental officers.
161EL-IN-EF-MB) Supplying and fixing best country wood meter cupboard with shutters double leaves with 230mmx25mm size CW planks for alround sides 62.5 mm x31.25mm styles and rails for shutters and 75mm x 25mm weld mesh of 6 and 10 gauge for panels including labour charges for fixing in position of shutters and cost of ‘L’ clamps. 6 nos of size 150x150mm size with 25mmx4mm MS flats, 1nos of 6” x 1/2” aluminium aldrop with bolts and nuts. 6 nos of 3” size I.O. butt hinges with screws 2 nos of 2” size I.O. hooks, eyes, TW plugs, screws etc. complete and as directed by the Departmental officers and as per drawings.
162EL-IN-EF-FH) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick including cost and fixing in position etc., complete and as directed by the depatmental officers. (The quality should be got approved by the Executive Engineer before use).
163EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan)
164EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation . (The brand should be got approved from the Executive Engineer before supply made).EL-IN-EF-48'F)a) 48\\"\\" Electric fan 1200mm sweep
165EL-IN-EF-EF) Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality including necessary wall opening, fixing and finishing the wall opening and making good including cost of materials, labour for fixing, chipping and redoing necessary inter connection, scaffolding, hire charges for tools and plants etc., all complete and as directed by the deparmental Officers.EL-IN-EF-EF300) b) 300 mm dia sweep AC exhaust fan
166EL-IN-EF) Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers. EL-IN-EF-9W) a) 9 watts LED bulb
167EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position etc., all complete and as directed by the departmental officers (The material should be got approved from the Executive Engineer before use).
168EL-IN-EF-BH)Supplying and fixing of water tight Bulk head fitting suitable for 12W LED with guard, including ncessary connections, cost of materials etc., all complete and as directed by the departmental officers (the quality of the bulk head fittings should be got approved from the executive engineer before use)
169EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet steel contact gear cum reflector tray duly finished glossy white for optimum reflection with clear ribbed acrylic bowl fixed to aluminium frame with gasket lining secured to canopy by means of hinges for one side and foggle - catches in the other side for minimum projection against dust and water entry all prewired upto terminal block complete with all accessories such as copper wire, LED, bulb etc., complete using 25mm dia GI 'B' class pipe for 1.50m length, confirming to ISI specifications and including labour charges for fixing street light fittings in EB pole / wall etc., complete as directed by the departmental officers. (The quality and brand of entire fitting should be got approved from Executive Engineer before use).EL-EX-EF-SL-25W)25W LED Street Light Fitting with LED
170EL-IN-EF-TPN) Supply and fixing of follwing Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection, cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-TPN-32a) a)32 amps triple pole main switch with fuse and neutral link
171EL-IN-EF-DP) Supply and fixing of follwing Double pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection, cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-DP-32a) a)32 amps DP main switch with fuse and neutral link
172EL-IN-WR-2x1.5m²) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete.
173EL-IN-WR-2x2.5m²) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990, 1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete.
174EL-IN-WR-4x4m²EB) Run off the 4 wires of 4 sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc.. all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection single phase)
175EL-IN-EF-AC Plug - 20A) Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) including cost of materials and labour charges etc., all complete as directed by the departmental officers. (The brand and quality should be got approved by the Executive Engineer before use).
176Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.
177EL-IN-EF-TWP) Supplying and fixing of 1 no of following thick TW plank varnished with 1 no of 25 amps 250 volts fuse unit and 1 no copper earth plate of suitable size bolts and nuts on wall for EB service connections including cost of all materials etc., all complete (Single phase service connection)EL-IN-EF-TW P-450x300x20)b) 1 No. of 450x300x20mm thick TW plank
178EL-IN-EP-ELCB-TP) Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) combined with over load and short circuit protection having a rupturing capacity of 6 KA with 30 milliamps fixed setting sensitivity and rates for 25 A insuitable sheet steel enclosure conforming to IS 12640/1988. Including cost of ELCB/RCCB on fully concealed suitable MS box with necessary inter connections and earth connections using copper cable including cost of all materials etc., all complete.
179WS-IN/EX-P-Dia) Supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the pipe should be got approved from the executive engineer before use)WS-IN/EX-GI-40) e. 40mm dia GI Pipe
180EL-IN-EF-8 SWG) Supplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc... including cost of all materials etc.. all complete.
181EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., all complete.c) 3 Nos of 100 amps 500 volts grade porcelain fuse unit
182EL-IN-TEL-TV-P20) Supplying, laying and concealing of PVC pipe of 20mm dia with necessary specials and other materials including Run off 1 No. Fish wire (G.I.22g) for drawing cable for T.V./Telephone etc., all complete and as directed by the departmental officers.
183EL-IN-TEL-TV-S) Supplying, fixing and concealing T.W box of size 8'x6'x4' covered with 3mm thick hylem sheet including Cost of TV line socket / Telephone line Socket etc., all complete and as directed by the departmental officers.
184EL-EX-LTUG-BG) Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth including cost of all materials and labour charges all complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the cable shall be got approved by the Executive Engineer before use). Below Ground Level.EL-EX-LTUG-BG-3.5C35)g). 3.5 core 35 sq.mm.
185EL-EX-Br CG-S&D) Supplying and delivery of following brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use)EL-EX-Br CG-S&D-3.5C35)g). 3.5 core 35 sq.mm.
186EL-EX-ET-S&D) Supplying and delevery cable end termination of following PVC LTUG Aluminium armoured cable with necessary aiuminium cable sockets by crimping etc.EL-EX-ET-S&D-3.5C35)g). 3.5 core 35 sq.mm.
187EL-7S-8w MCB-WO ELCB-OW) Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in Each segment) and seperate provision for MCB / Isolators ( totally 24 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only.6A-4 PMCB - 1 No.63A - DPMCB isolator - 3 Nos.6A to 32A SPMCB - 12 Nos.
188MW-SNB-MS-N&LO B) Supplying, fabrication and erection in position of M.S. scheme name and layout board with 50x50x6mm M.S. angle for vertical post and support posts with 2.5 mm thick m.s. sheet for a size at 1.80x1.20m with 40x40x6mm m.s. angle around the board and 50x6mm flat stiffeners on both directions including cost of welding charges, painting charges and drawing the layout and lettering the scheme details as directed by the departmental officers including earth work excavation for 4 nos of pits, PCC 1:5:10 (one of cement, five of crushed stone sand and ten of HB stone jelly) for pits. 0.45 x 0.45 x 0.60m below ground level and PCC 1:2:4 (one of cement, two of crushed stone sand and four of 20mm HB stone jelly) including Mortar Plasticizer (Liquid) at 200ml per bag at 0.30 x.0.30 x 0.30m above ground level for erection, conveyance charges etc., all complete and as directed by the departmental officers.
189MW-NL-PFP-S) Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (The quality of the material should be got approved from Executive Engineer before use)MW-NL-PFP-20 x 5) a) 20'' x 5' Plastic Foam Plate
190MW-L/E-Alu-S) Supplying and fixing in position of following size aluminium die casting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc., all complete and as directed by the departmental officers. (the design should be got approved from the executive engineer before moulding)MW-L/E-Alu-30 cm)15\\"height Logo / Emblem
191MW-NL-Alu-S) Supplying and fixing of following size Aluminium die casting Lettering and Numbering with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc all complete and as directed by the departmental officers. (the design should be got approved from the executive engineer before moulding)MW-NL-Alu-9') b) 9' dia aluminium dye casting letters
192FA-SD-LWK-L) Supplying and delivery of following GODREJ / EQUIVALENT NOVTAL LOCK including cost of materials and labour charges etc., all complete and as directed by the departmental officers. (the brand and quality of the materials should be got approved from the executive engineer before use)FA-SD-LWK-6w3) a) 6 Lever Lock with 3 Keys.
193IN-FC-GAL-0.47) Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nut, bolts etc., all complete and as directed by the officers.(the quality and the brand of material should be got approved by the executive engineer before use) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58564560
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 02-12-2026
Authority
Authority Name Tamil Nadu Police Housing Corporation Limited
Work Description Tender for Construction Of All Women Police Station With Development Work At Pennagaram In Dharmapuri District Under Honble Cms Announcement In The Assembly During The Police Demand For The Year 2026-2027 Held On 03.09.2026.
Basic Detail
Tender No SE/NC/DB/2794/2026
Bidding Type Tender
Location
City Dharmapuri
State Tamil Nadu
Key Dates
Publish Date 17 Nov 2026
Submission Date 02 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 87900
Exemption Not Available
Document List
18a227f5-11c5-4ab9-917b-d3aa83a8939b.html
BOQ_872877.xls
TenderDocAWPSPennagaram.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

18a227f5-11c5-4ab9-917b-d3aa83a8939b.html

xls

BOQ_872877.xls

pdf

TenderDocAWPSPennagaram.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender