Tender For Supply, Installation Successful Commissioning Of 5Hp Dewatering Pump With Allied Items For Mobile Workshop.
Tender Value
2 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
3 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation Successful Commissioning Of 5Hp Dewatering Pump With Allied Items For Mobile Workshop.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing & commissioning of 05 HP portable de-watering vertical submersible pumping unit with allied fittings/items confirming to IS Code and site requirement. The broad specifications of the pumping unit shall be:(A) Pumpi. Casing: CIii. Impeller: SS-Alloyiii. Shaft: SS-Alloyiv. Rated Flow: 1000 LPMv. Rated Head : 09 Metresvii. Number of stages: Singleviii. Speed: 2900 rpm ix. Delivery: Nominal Bore (NB) 80 mm (or 65 mm supplied with a matching 80 mm companion structural flange/adapter). The pumping unit shall be of standard quality conforming to ISI standards and certified by BIS like Darling/CRI/Crompton Greaves/Kirloskar/KSB or equivalent.(B) Motori. Horse Power: 5 HPii. Type: Squirrel cageiii. Speed: 2900 rpmiv. Operating Voltage: 415 ±10% Voltsv. Duty Cycle : Class S1(Continuous duty, safe for fully or partially submerged operation). vi. Degree of Protection: IP68 with class F insulationvii. Method of Starting : DOL(C) Delivery Pipei. Dia.: 80 mmii. Length: 15 miii. Type: CanvasPower Cable: Minimum 10 meters of heavy-duty, water-resistant, PVC/Rubber-sheathed flexible copper conductor submersible cable complete with a compression-sealed, epoxy-molded inlet gland. The pumping unit should have all the relevant test certificates, dynamic balancing certificate and performance characteristics with necessary manual/brochure. The pumping unit should have a minimum 1 year warranty period from the date of successful commissioning. |
| 2 | Supply, installation, testing & commissioning of 03 HP portable de-watering vertical submersible pumping unit with allied fittings/items confirming to IS Code and site requirement. The broad specifications of the pumping unit shall be:(A) Pumpi. Casing: CIii. Impeller: SS-Alloyiii. Shaft: SS-Alloyiv. Rated Flow: 500 LPMv. Rated Head : 16 Metres vii. Number of stages: Singleviii. Speed: 2900 rpm ix. Delivery: Nominal Bore (NB) 65 mm. The pumping unit shall be of standard quality conforming to ISI standards and certified by BIS like Darling/CRI/Crompton Greaves/Kirloskar/KSB or equivalent.(B) Motori. Horse Power: 03 HPii. Type: Squirrel cageiii. Speed: 2900 rpmiv. Operating Voltage: 415 ±10% Voltsv. Duty Cycle : Class S1(Continuous duty, safe for fully or partially submerged operation). vi. Degree of Protection: IP68 with class F insulationvii. Method of Starting : DOL(C) Delivery Pipei. Dia.: 80 mmii. Length: 15 miii. Type: CanvasPower Cable: Minimum 10 meters of heavy-duty, water-resistant, PVC/Rubber-sheathed flexible copper conductor submersible cable complete with a compression-sealed, epoxy-molded inlet gland. The pumping unit should have all the relevant test certificates, dynamic balancing certificate and performance characteristics with necessary manual/brochure. The pumping unit should have a minimum 1 year warranty period from the date of successful commissioning. |
| 3 | Supply, installation, testing, and commissioning of a 5 HP (3.7 kW), 3-Phase, 415V, 50Hz Direct-On-Line (DOL) Starter Panel housed in an IP54/IP65 powder-coated weatherproof enclosure. The starter assembly shall feature a heavy-duty 16A magnetic contactor with a wide-band operating coil, a finely adjustable Overload Relay (OLR) covering the 6–14A operating range, an automated Single Phase Preventer (SPP) protecting against phase failure and reverse sequence, and an integrated current-sensing or probe-based Dry Run Protection system with dynamic under-current cutoff. The unit must include digital or analog scanning Volt/Ammeters and automatic/manual selector switching configuration optimized for continuous-duty submersible pump operations. Preferred makes are Havells/BCH/L&T (MUG)/Crompton. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender