Tender For Special Repair To Bldg No P-56 (Mortuary) At Military Hospital Khadki Under Ge (Mh & Rh) Khadki
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-56 (Mortuary) At Military Hospital Khadki Under Ge (Mh & Rh) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water all as specified. |
| 2 | M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 3 | M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified .( Note:- WPC measured and paid saperately) |
| 4 | M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement |
| 5 | M&L for Preparing Newly Plastered Surfaces of internal wall and ceiling and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed. |
| 6 | M&L for preparation of new plastered surfaces of wall and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of primer all as specified and as directed.NOTE :-(ii) Rate quoted shall be deemed to be included for scaffolding up to 20 mtr height building. |
| 7 | M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound distempered over 1mm thick wall care putty on wall over priming surafce complete all as specified and directed |
| 8 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed. |
| 9 | M & L for RCC (1:2:4) nominal Mix using 20mm graded aggregate in chajjas,parapet facia etc complete all as specified and as directed. |
| 10 | M&L for RCC -M-25 ( nominal mix) using 20mm grades stone aggregate as in Fins, fascias, louvres,parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed. |
| 11 | Use and waste of form work to faces of walls, retaining walls , abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter surface fair finished complete all as specified and directed. |
| 12 | Use and waste of form work to Chajjas and similar items including edges etc complete all as specified and directed. |
| 13 | S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.Note : The re inforcement shall be welded with existing re inforcemnet after dismantaling of RCC Chajjas/Parapets etc. |
| 14 | Roughening surfaces of old concrete floor/terrace by picking incl.Taking down / removing existing water proofing treatment from RCC roof slab or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m. |
| 15 | M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roof area. |
| 16 | M&L for 15 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 17 | M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs- |
| 18 | Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 19 | One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. |
| 20 | One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. |
| 21 | Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm. |
| 22 | Supply only integral water proofing compound |
| 23 | Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces . |
| 24 | M&L brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 all as specified. |
| 25 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 26 | M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed |
| 27 | M&L Vitrified ceremic tiles 8 to 10 mm thick, in LIGHT SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 28 | M&L for Vitrified ceramic tiles 8 to 10mm thick Light SHADE (square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specified and as directed. |
| 29 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 30 | M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 31 | Dismantling of Stone slabs and tiles of any description or thickness , aprons laid bedded and pointes in any mortar. |
| 32 | M&L for Granite (of any type ) 25 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed. (In Ramp portion Granite laid with 100mm strip in horizontal line) |
| 33 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as as specified and directed. |
| 34 | M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.. |
| 35 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified. |
| 36 | M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed |
| 37 | M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete. |
| 38 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed. |
| 39 | M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed. |
| 40 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) |
| 41 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each all as specified. |
| 42 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm . |
| 43 | Providing and fixing decorative aluminium grill type Decogrill made from extruded aluminium alloy sections of approved make and design, including cutting, fabrication, welding/crimping, frame, holdfasts, screws, anchor fasteners and all necessary fittings complete, finished with powder coating/anodizing as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fix for aluminum alloy powder coated door shutters partly panelled partly glazed shutter having door frame made out of alumunium anodised section of size 100 x 44.45 x 2.00 mm thick and shutters made out of bottom rail of tube section 114 x 44.45 x 2.00 mm thick and top rail, middle rail, styles of tube section 85 x 44.45 x 2.00mm thick, using 5 mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8 mm dia anchor rod and 12 mmm thick both side prelaminated particle board including fixed aluminium anodised 2 nos 125 mm circular handle, 200 mm long tower bolts -2 Nos, Door Stopper 2 Nos, One No lock 4 lever (ISI), vertical type of 65 mm with triplicate key, bush and including 3 Nos aluminium butt hinges, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, making good of wall surface to match with existing surface complete door frame fixed to wall with 8 Nos rawl plugs 150mm, including dismantling old doors complete all as specified and as directed by Engineer-in-Charge. Note : Particle board and glass is included in this item and no extra payment shall be made for the same. |
| 45 | S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge |
| 46 | S & F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed. |
| 48 | S&F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 49 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed |
| 50 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 51 | S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. |
| 52 | S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed. |
| 53 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed. |
| 54 | S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed. |
| 55 | S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed. |
| 56 | S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed |
| 57 | S&F2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed. |
| 58 | S&F 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed. |
| 59 | S&F Continuous (piano) hinges,mild steel bright finish or electrogalvanised, width of flaps (when open) 30 mm all as specified and directed. |
| 60 | S&F in repair 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified |
| 61 | S&F in repair 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified |
| 62 | S&F aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed. |
| 63 | S&F MS Peg set of six powder coated as approved by GE. |
| 64 | M&L for mild steel pipe 25 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified. |
| 65 | M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer com all as specified. |
| 66 | Taking up or down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified |
| 67 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 68 | S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed. |
| 69 | S&F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed. |
| 70 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 71 | S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 72 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed. |
| 73 | S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes |
| 74 | S&F in repair C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and directed. |
| 75 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 600 mm long complete all as specified. |
| 76 | S&F in repair Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed. |
| 77 | S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified |
| 78 | S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) |
| 79 | S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed |
| 80 | S&F 600x450 bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed. |
| 81 | S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed. |
| 82 | S & F in repairs Towel ring brass chromium plated round type fixed with screws and wooden or plastic cleats complete all as specified and directed. |
| 83 | S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and directed. |
| 84 | S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. ACN-1151N |
| 85 | S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. |
| 86 | S&F in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified. |
| 87 | S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and directed. Cat Part No- ALD 565 |
| 88 | S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as spfd |
| 89 | S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed. |
| 90 | S&F CP waste fittings brass chromium plated for sink 32mm dia (including waste pipe) with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed. |
| 91 | M&L in repair for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 92 | M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified 7and directed. |
| 93 | Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 94 | S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed. |
| 95 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 96 | S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed. |
| 97 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door |
| 98 | S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed. |
| 99 | S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed. |
| 100 | S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed. |
| 101 | M/L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed |
| 102 | M/L PVC(SWR) Tee of 75mm dia access door etc complete all as specified and directed |
| 103 | S&F PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified |
| 104 | Dismantling boarding of any description fixed in any posn with nails/screws. |
| 105 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed by the Engr-in-Charge. |
| 106 | Dismantling water tanks exc 500 and n exc 1000 ltr capacity complete all as specified and directed. |
| 107 | S& F 1000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I. |
| 108 | S & F in repair 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified. |
| 109 | S&F in repair 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and directed |
| 110 | S&F in repair 25mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and directed |
| 111 | S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Complete all as specified and directed. |
| 112 | Dismantling wroght iron or mild steel work of any description not oterwise provide for all as specified and directed. |
| 113 | S&F Hand rails, half round or other steel section (MS angle 50x50x5mm, 60x60x6mm) or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 114 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm, long and 5 to 10mm dia complete all as specified and directed. |
| 115 | S&F in repairs mild steel framed work such as guard bars/grills, gate, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified. |
| 116 | M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified |
| 117 | Dismantling asbestos cement corrugated or semi corrugated sheets in roof coverings complete all as specified and directed. |
| 118 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws as specified but bent to a curve of any radius all as specified and directed. |
| 119 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws as specified but bent to a curve of any radius all as specified and directed. |
| 120 | M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 Volts drawn into PVC concealed conduit medium grade including its accessories such as tees, bends ,elbows, socket and chisselling on wall complete and also making good the disturbed surfaces of wall/ ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed GI box of suitable size with modular cover plate for housing switch ,socket,regulators etc complete for the following:- |
| 121 | One light point controlled by one switch |
| 122 | One Exhaust Fan/ Ceiling fan point controlled by one switch |
| 123 | One socket outlet 3 pin 5 amps same board |
| 124 | One socket outlet 3 pin 5 amps Independent board |
| 125 | All as per item No 1 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed. |
| 126 | S & F for Modular Switch, 1 module single pole one way, and 6 amp complete ISI mark complete all as specified and directed by Engr-in-Charge. |
| 127 | S & F Switch 16 Amps Modular one Way all as specified and directed by engr- in- charge. |
| 128 | S & F socket 6A/16 Amps Modular Flush type, all as specified and directed by engr- in- charge. |
| 129 | S & F for Modular Socket, 2 module single pole one way, and 6 amp complete ISI mark complete all as specified and directed by Engr-in-Charge. |
| 130 | S & F stepped type modular fan regulator, capacity 120 w - 2 module suitable for 1200/1400 mm ceiling fan all as specified and directed by Engr-in-Charge. |
| 131 | Supply and fix ceiling rose surface bakelite with three terminals 2 Amp,240 Volt AC complete all as specified and directed. |
| 132 | S & F in repair of capacity MCCB 100 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity Make: L &T /Legrand/standard. |
| 133 | S & F for sheet metal enclosure vertical TPN DB 4 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnetic locking system complete all as specified and as directed. |
| 134 | S & F for sheet metal enclosure MCB SPN DB 4 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnetic locking system complete all as specified and as directed. |
| 135 | Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 Amps,AC, 240V, 10 KA 'B' curve in the MCB DB Complete with connection testing and commissioning. |
| 136 | Ditto same as item no 12 but SPN 32 Amps . |
| 137 | Ditto same as item no 12 but TPN 40-63 Amps . |
| 138 | M&L for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC conduit of size 20 mm dia including 2.5 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing complete all as specified and directed by Engr-in-Charge..Note: Two core cable and earth wire and conduit shall be measured one length as one running mtr. |
| 139 | M&L for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC conduit of size 20 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing complete all as specified and directed by Engr-in-Charge..Note: Two core cable and earth wire and conduit shall be measured one length as one running mtr. |
| 140 | Taking down old unserviceable Recess mounting fitting of any type from any height and S & F high quality Energy efficient Recess/Surface mounting 2'x2' recessed inverter fitting, CRCA powder coated steel housing with high power brightness having BIS certification of 42W, fitting should be LM 80 certified with system efficacy greater than and equal to 120 lumens/watt, having Lithium ion battery of cap 3.7V, 19 WH for backup upto 2 hrs having operating voltage range 90volts to 300volts having colour temperature 5700K, PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, connecting with three core flexible copper wire from connector to ceiling rose as per site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Havells/Crompton .Note :- (i) The rates are inclusive of civil work (minor plastering, painting, false ceiling repair etc) wherever required for fixing the fittings to the roofs/ceilings. |
| 141 | Taking down old unserviceable tube light fitting and Supply and fixing LED lights fitting 1x 22 W, 220V,AC, decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make :- Jaquar/Halonix/Philips or equevalent. |
| 142 | Taking down old unserviceable Bldg security light S&F fix high efficent LEDbuilding security light 45 watt , 230 V , lumen 2000 -3000, PF> 0.9, THD less 10%, made of pressutre cast aluminuim housing with high power LEDs, lens and touughned glass IP 66 connecting with three core flexible copper wire from connecto to ceiling rose including GI bracket of size 40 mm dia, Make- Halonix ,Bajaj,Havells or equivalent make, |
| 143 | Taking down old unservicable ceiling fan of any type depositing it to MES store and Supply & fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 144 | Taking down old unservicable water heater of any type and capacity depositing it to MES store and Supply and fixing of Electric water heater storage type of capacity 25 Ltr vertical type wall mounted including 15/16 Amp plug top with suitable wall supports and for manual operation, digital temperature display, feather touch buttons, built in thermostate, auto shut off, powder coated single line weld container with PUF insulation, heating element capacity of 2 KW including 7 year warranty of inner tank and 4 year warranty of heating element and 2 year warranty of other part, Voltage rating 230 V, frequency 50 Hz with BEE 5 star rated and including steel braided connecting hoses for Hot and Cold water pipe connecting to CPVC and GI pipe with NRV complete all as specified and directed. Make :- Jaquar/ Havells or equivalent |
| 145 | Taking down old unservicable Exhaust fan of any type, depositing it to MES store and Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, frame and louvers complete with ISI mark all as specified and directed by Engr-in-Charge. |
| 146 | S & F Single pole and neutral enclosure with a metal two pin and earth plug and metal clad socket complete with one Double pole MCB 20 Amps complete all as specified. |
| 147 | Taking down old unservicable Split AC of any type, depositing it to MES store and Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed by Engr-in-Charge . |
| 148 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 149 | Excavation in trenches in soft/ loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables etc and getting out all as specified and directed at site. |
| 150 | Excavation in trenches in Hard/ Dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables etc and getting out all as specified and directed at site. |
| 151 | Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, complete all as specified and directed at site |
| 152 | Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 153 | Material and labour riddle earth cushning for underground cable in trenches including spreading, levelling and well ramming complete all as specified and directed. |
| 154 | Supply and laying un-rinforced precast concrete cable cover ,class LV,Type 1,flat of size 250 mm x150 mm x40 mm all as specified and directed. |
| 155 | Supply & lay pipes galvanised \\"Light grade\\" size 50 mm bore supplied and laid complete including fitting complete all as specified and directed |
| 156 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender