Water Resources and Irrigation Government Departments Closing in 3 days TDR #58563283

Tender For Revival Works At Kasati Tw Project Under Tihidi Block

Issued by Government Departments · Bhadrak, Odisha
Tender Value
22.76 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
22765
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Revival Works At Kasati Tw Project Under Tihidi Block

BOQ

Name of Work:- Revival Works at Kasati TW Project under Tihidi Block
Sl. No. Item Description
1Cost of Labour Charges for Single under reamed pile foundation (Excavation of Bore Hole 250mm dia and 3.0m long)
2Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50 Mtr. & lift of 1.5 Mtr. etc. complete as per the direction of the Engineer-in-Charge.
3Earthwork in excavation for 200 mm & 160 mm dia HDPE Under Ground Pipe Line for foundation in hard soil such as Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Sahles, Moorum ordinary gravels etc. within 50 m. Initial lead and 1.5 m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc. complete as per direction of the Engineer-in-Charge. (Excavation by mechanical means 60% & manually 40%)
4Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-in-charge.
5Cement concrete (1:4:8) with 04cm size HGB crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, Cost of supplying cement T&P required etc. complete as per the direction of the Engineer-incharge.
6Rigid smooth centering & shuttering H.G RCC works. (a) RCC foundation plinth footing base of column.
7(b) Lintal
8C ) RCC Roof slab and chajja upto 4.3 Mtr.
9(D) RCC Column
10Cement concrete (1:2:4) with 12 mm size black HGB crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, Cost of supplying cement T&P required etc complete as per the direction of the Engineer-in-Charge.
11Brick work with Fly Ash Brick 25 cm x 12 cm x 08 cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-in-Charge.
12Brick work with Fly Ash Brick 25 cm x 12 cm x 08 cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in superstructure complete as per the Engineer-in-Charge.
132.5 cm DPC with CC (1:2:4) using 12 mm size HG Chips.
1412 mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge.
15Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge.
16Cost of the uncoated HYSD Bar reinforcement including Labour charges for cutting bending binding tying the cost of binding wires (18 to 20 gauge) including cost of MS Rod.
1725 mm thick AS Flooring with CC (1:2:4) using 12 mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge.
18Cost of Iron Door with Choukath (1.00 x 2.00 m) 1 No. & Iron Window with Choukath (0.75 x 1.00 m) size 1 No.
19Labour for fitting and fixing of MS Door shutter & window shutter with grills including cost of screw complete with trasportation as per approved design.
20Finishing wall with water proofing cement paint two coats.
21Labour charges for painting two coats with any approved enamel paint over two coat primer.
2212 mm cement plaster in cement mortar (1:4) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge.
23Filling the foundation and plinth with excavated material as directed by the Engineer-in-Charge.
24Filling in F&P with excavated materials in layers ot exceeding 0.30 m including breaking clods within 50 m. Initial lead including leveling the tranches as the case may be etc. complete as per the direction of the Engineer-in-Charge. (Quantity by means of Mechanical 60% & manually 40% i.e of respective item No. 03 above).
25Writing charge of required information and data on both side of the transperancy pillar and on the wall of the pump chamber including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-in-Charge.
26Cost, Supplying of ISI Mark High Density Polythelene (HDPE) Pipes for water supply as per IS-4984/2016 in the 200 mm dia HDPE Pipe PE-80-PN4 grades of materials pressure rating including the rate of ex-factory, transportation, Pre and Post Inspection, Cess etc. complete but excluding the cost of GST.
27Supplying all materials, labour, T&P for jointing of 200 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per specification & laying in tranches including testing including transportaion with all cost etc. complete as per direction of the Engineer-in-Charge.
28Cost, Supplying of ISI Mark high density polythelene (HDPE) Pipes for water supply as per IS-4984/2016 in the 160 mm dia HDPE Pipe PE-80-PN4 grades of materials pressure rating including the rate of ex-factory, transportation, Pre and Post Inspection, Cess etc. complete but excluding the cost of GST.
29Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per specification & laying in tranches including testing including transportation with all cost etc complete as per direction of the Engineer-in-Charge.
30Supplying of 100 mm dia nominal bore G.I Pipe having wall thickness 4.5 mm electrical resistance welded. Medium class confirming to IS 1239 (Pt-1/2004) with latest amendment screwed at both ends as per IS-554 with screw & socketed with one end and other end protected with plastic threaded protector. The socket confirming to IS 1239 (PT-II 1992) with latest amendment with random length of 4 to 7 Mtr. & socket bear ISI certification & manufacturer Trande Marks including all taxes etc. with guarantee.
31Cost of 100 mm dia G.I Bend (Medium duty) confirming to IS-1239 (Pt-II 1992) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
32Cost of 100 mm dia G.I Flange (Medium duty) confirming to IS No. 6392/1971 with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
33Cost of supplying 100 mm dia MS Tubewell clamp (Pair) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
34Cost of supplying 200 X 100 mm dia MS Tubewell Cap with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
35Cost of supplying 200 mm dia HDPE End Cap 6 kg./Cm2 including all taxes, cost & conveyance and royalties etc.
36Cost of supplying 6 mm2 PVC insulated Wire Rope for preventing slipping the Submerssible Pumpsets including all taxes and royalties etc.
37Cost of supplying 100 mm G.I Socket (Medium duty) confirming to IS-1239 (PT-II 1992) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
38Cost of supplying 200 X 200 X 160 mm Spigot moulded reducing HDPE Tee 10 Kgf/cm2
39Cost of supplying 160 X 160X 160 mm HDPE Tee Spigot design 6 Kgf/cm2
40Cost of supplying 200 X 110 mm HDPE reducer including all taxes and royalties etc.
41Cost of supplying 100 mm dia C.I Sluice Valve of double Flanged type PN-1.0 as per (IS-14846-2000 standard) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST (As per S/R 2022).
42Cost of supplying 100 mm dia C.I Double Flanged Non-Return Valve of swing type PN-1.0 (IS-5312 (Part-I-2004) with bypass arrangement with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST (As per S/R 2022).
43Cost of Labour charges and T&P for lowering of Subermessible pumpset with 100 mm Ø GI Pipe in suction & delivery side and fittings of priming Tee along with all accessories, sluice Valve, NR Valve etc. and fittings, jointing with HDPE Pressure pipe line in delivery side including cost of transportation
44Cost of supplying 160 X 160 X 110 HDPE Tee with HDPE Tee with GI weldless raiser bend etc. including all taxes & royalties of materials.
45Cost of supplying all materials required for 50 mm dia Kirloskar Air Release Valve PN-1.6 shall confirm to IS 14845 with saddle, Raiser pipe & other fitting materials including all taxes & royalties of materials complete
46Cost of supplying all materials required for 150 mm dia Butterfly Valve as per direction of site Engineer in charge including all taxes & royalties of materials.
47Cost of supplying 160 mm dia HDPE End Cap with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
48Cost of supplying 110 mm dia Slipon Flange with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
49Cost of supplying 200 mm HDPE Elbow spigot design 10 kg. with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
50Cost of supplying 160 mm HDPE Tail Piece of 160 mm long with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST.
51Labour charges for fitting & fixing of 150 mm Ø Butterfly valve as per therequirement of under gound pipe line
52Labour charges for fitting & fixing of 50 mm Ø CI Air Release Valve complete set with under ground laid HDPE Pipe line
53Labour charges for fitting & fixing of 200x200x110/ 160x160x110 mm Ø HDPE Tee with Weldless GI Raiser as per requirement with under ground laid Pipe line
54Supplying of 7.5 HP./5.6 KW Star Rated (BEE 03 Star Energy efficient) Submerssible pumpset Coupled with totally enclose water cooled squirrel cage induction motor with delivery discharge 900 LPM at 25 Mtrhead (having Bronze metal impeller grade LTB-02 of IS 318/1981 confirming to IS specification) with full length cable, cable clip, support clamp etc. suitable for operation at 415+6%,- 15% Volt, 3 Phase, 50 Hz and AC Power supply with ISI Mark gauarantee including all taxes.
55Supplying of Autostar Delta Control Pannel Starter of sheet steel enclosure suitable for operation of 15 HP/5.6 KW squirrel cage induction Motor with 16 amp (AC/3) duty contactor at 415 Volt+6% - 15%, 3 Phase, 50 HZ,AC supply with over load relay range 8.9 Amp to 13.5 Amp. and No volt coil with Electronic timer suitable for operation at voltage of 300 - 400 volt and to provide dependable protection during over load and single phasing including all taxes etc. with ISI make guarantee.
56Supplying of 3 core X10mm2 PVC Insulated (HD) Armoured Electric cable with Aluminium Conductor for use in 3 Phases power system of working voltage upto and including 11 KV of 50 HZ confirming to IS-1554 (PT-5)/1998 with ISI mark including all taxed etc.
57Supplying 63 Amp 415 volt T.P Main switch confirming to IS- 4064 (PT-1 & PT-II) with utilisation category AC-22 with ISI mark including all taxes etc.
58Pipe earthing with 30mm dia x 3 Mtr G.I Pipe with proper slotting-02 Nos.,30mm diam G.I Flange-02 Nos., No 8 G.I Wire-10Kg., Charcol-10 bags, Salt-100Kg., 50mm diam flexible conduit pipe-05 Mtr., digging earth pit 02 Nos. (1.2m x1.2m x3m) and earth trench-03x6.3mx1.0mx06m with transportation, fitting and labour charges etc complete as per direction of Engineer-In-charge.
59Labour charges for Electrical Installation &energisation
60Supplying all materials T&P and labour for wiring of Pump Chamber with required wiring materials like PVC pipe,3/20 PVC Wire, Ampere Tape, PVC Tape, 63 Amp. Kit Kat,12\\"X10\\" Tin Board with fibre plate, Indicator Lamp with holder,angle holder conduit Pipe, Flexible conduite pipe 05 Pin Socket, Wall Clamp, Nut Bolt, 03 Way,100 W Bolt Switch and fitting. Fixing on completion of wiring including supplying,Transportation of materials to work site including cost conveyance royalty taxes of all materials as per direction of Engineer-in-charge.
61Supplying all materials T&P and labour for fitting of TD Cable with Main supply line underground by digging cable,Trench & fitting after laying of cable connection the pannel as required as per direction of the site Engineer-in-charge.
62Supplying 4 KVAR Power Shunt Capacitor including all taxes etc.
63Supplying 4 mm2 single core PVC coated Copper wire including all taxes etc.
64Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 80 Sqmm AAA Conductor average span 40mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, Interposing Pole, Cut-Point and guarding at Road crossings etc as required. including cost of all materials, labour transportation,inspection & commissioning etc. complete.
65Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr / 330 kg 10 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPNODL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPNODL etc complete.
66Cost of 200 mm dia PVC casing pipe ASTM confirming to ISI (sch-80)
67Labour charges for cutting Transverse slot on 200 mm dia PVC ASTM pipe with slot size 1.5mm as per specification
68Cost of 200 mm dia PVC well cap / end cap
69Cost of 200 mm dia PVC cone / bail plug
70Cost of 200 mm dia PVC Nipple / short piece
71Cost, supplying of washed and screened gravel PE-6 size river shingels or bajri including all cost etc complete (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum
72Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in allivial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of ownRigs with its accessories,tools and plants and all consumables (like coir rope,cotton waste and bentonite powder etc. complete and excavation of mud pit, settling pit and water channel with re-filling all) for lowering of finished bore suitable for lowering (minimum 450 mm dia.) of 200mm dia ASTM-PVC pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations.(GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion a) 0 mtr. To 80 mtr.(UPTO 100 mtr.)
73Supply of all Labour & T&P for lowering the 200mm dia (Sch.80) ASTM PVC Pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position including cutting & threading of soltted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.
74Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58563283
AUTHORITY Government Departments
TENDER VALUE 22.76 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender For Revival Works At Kasati Tw Project Under Tihidi Block
Basic Detail
Tender No 01/ 2026-27(2090)/ OLIC(BDK)/ Dt. 22.10.2026
Bidding Type Tender
Location
City Bhadrak
State Odisha
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 22.76 Lakhs
Tender Fee 7080
EMD 22765
Exemption Available
Document List
9d996afb-b7cc-4a72-a7fc-9cb6de657add.html
BOQ_621524.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

9d996afb-b7cc-4a72-a7fc-9cb6de657add.html

xls

BOQ_621524.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender