Tender For Revival Works At Ghatapur-I Rl Project Under Chandbali Block
Tender Value
20.84 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
20845
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Revival Works At Ghatapur-I Rl Project Under Chandbali Block
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Labour Charges for Single under reamed pile foundation (Excavation of Bore Hole 250mm dia and 3.0m long) |
| 2 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50 Mtr. & lift of 1.5 Mtr. etc. complete as per the direction of the Engineer-in-Charge. |
| 3 | Earthwork in excavation for 200 mm & 160 mm dia HDPE Under Ground Pipe Line for foundation in hard soil such as Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Sahles, Moorum ordinary gravels etc. within 50 m. Initial lead and 1.5 m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc. complete as per direction of the Engineer-in-Charge. (Excavation by mechanical means 60% & manually 40%) |
| 4 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-in-charge. |
| 5 | Cement concrete (1:4:8) with 04cm size HGB crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, Cost of supplying cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 6 | Rigid smooth centering & shuttering H.G RCC works. (a) RCC foundation plinth footing base of column. |
| 7 | (b) Lintal |
| 8 | C ) RCC Roof slab and chajja upto 4.3 Mtr. |
| 9 | (D) RCC Column |
| 10 | Cement concrete (1:2:4) with 12 mm size black HGB crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, Cost of supplying cement T&P required etc complete as per the direction of the Engineer-in-Charge. |
| 11 | Brick work with Fly Ash Brick 25 cm x 12 cm x 08 cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-in-Charge. |
| 12 | Brick work with Fly Ash Brick 25 cm x 12 cm x 08 cm size having crushing strength not less than 75kg/ cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in superstructure complete as per the Engineer-in-Charge. |
| 13 | 2.5 cm DPC with CC (1:2:4) using 12 mm size HG Chips. |
| 14 | 12 mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge. |
| 15 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge. |
| 16 | Cost of the uncoated HYSD Bar reinforcement including Labour charges for cutting bending binding tying the cost of binding wires (18 to 20 gauge) including cost of MS Rod. |
| 17 | 25 mm thick AS Flooring with CC (1:2:4) using 12 mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 18 | Cost of Iron Door with Choukath (1.00 x 2.00 m) 1 No. & Iron Window with Choukath (0.75 x 1.00 m) size 1 No. |
| 19 | Labour for fitting and fixing of MS Door shutter & window shutter with grills including cost of screw complete with trasportation as per approved design. |
| 20 | Finishing wall with water proofing cement paint two coats. |
| 21 | Labour charges for painting two coats with any approved enamel paint over two coat primer. |
| 22 | 12 mm cement plaster in cement mortar (1:4) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and Cost of supplying all labour and T&P required for the work etc complete as directed by the Engineer-in-Charge. |
| 23 | Filling the foundation and plinth with excavated material as directed by the Engineer-in-Charge. |
| 24 | Filling in F&P with excavated materials in layers ot exceeding 0.30 m including breaking clods within 50 m. Initial lead including leveling the tranches as the case may be etc. complete as per the direction of the Engineer-in-Charge. (Quantity by means of Mechanical 60% & manually 40% i.e of respective item No. 03 above). |
| 25 | Writing charge of required information and data on both side of the transperancy pillar and on the wall of the pump chamber including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-in-Charge. |
| 26 | Cost, Supplying of ISI Mark High Density Polythelene (HDPE) Pipes for water supply as per IS-4984/2016 in the 200 mm dia HDPE Pipe PE-80-PN4 grades of materials pressure rating including the rate of ex-factory, transportation, Pre and Post Inspection, Cess etc. complete but excluding the cost of GST. |
| 27 | Supplying all materials, labour, T&P for jointing of 200 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per specification & laying in tranches including testing including transportaion with all cost etc. complete as per direction of the Engineer-in-Charge. |
| 28 | Cost, Supplying of ISI Mark high density polythelene (HDPE) Pipes for water supply as per IS-4984/2016 in the 160 mm dia HDPE Pipe PE-80-PN4 grades of materials pressure rating including the rate of ex-factory, transportation, Pre and Post Inspection, Cess etc. complete but excluding the cost of GST. |
| 29 | Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per specification & laying in tranches including testing including transportation with all cost etc complete as per direction of the Engineer-in-Charge. |
| 30 | Supplying of 100 mm dia nominal bore G.I Pipe having wall thickness 4.5 mm electrical resistance welded. Medium class confirming to IS 1239 (Pt-1/2004) with latest amendment screwed at both ends as per IS-554 with screw & socketed with one end and other end protected with plastic threaded protector. The socket confirming to IS 1239 (PT-II 1992) with latest amendment with random length of 4 to 7 Mtr. & socket bear ISI certification & manufacturer Trande Marks including all taxes etc. with guarantee. |
| 31 | Cost of supplying 100 mm dia G.I Bend (Medium duty) confirming to IS-1239 (Pt-II 1992) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST. |
| 32 | Cost of supplying100 mm dia G.I Flange (Medium duty) confirming to IS No. 6392/1971 with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST. |
| 33 | Cost of Supplying motor hood made ou of 18 Gauge CR Sheet including all taxes and royalties etc. |
| 34 | Cost of Supplying base plate for motor and panel made of MS Channel with holes including all taxes and royalties etc. |
| 35 | Cost of Supplying 100 mm Ø C.I. Foot Valve |
| 36 | Cost of Supplying Empty outdoor irrigation panel board made out of 18 Gauge CR Sheet including all taxes and royalties etc. |
| 37 | Supplying fitting fixing of 200 mm dia HDPE End Cap 6 kg./Cm2 including all taxes, cost & conveyance and royalties etc. |
| 38 | Supplying fitting fixing of 100 mm G.I Socket (Medium duty) confirming to IS-1239 (PT-II 1992) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST. |
| 39 | Supplying fitting fixing of 200 X 200 X 160 mm Spigot moulded reducing HDPE Tee 10 Kg. |
| 40 | Supplying fitting fixing of 160 X 160X 160 mm HDPE Tee Spigot design 6 Kg. |
| 41 | Supplying fitting fixing of 200 X 110 mm HDPE reducer including all taxes and royalties etc. |
| 42 | Cost of supplying 100 mm dia C.I Sluice Valve of double Flanged type PN-1.0 as per (IS-14846-2000 standard) with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST (As per S/R 2022). |
| 43 | Cost of supplying 100 mm dia C.I Double Flanged Non-Return Valve swing type PN-1.0 (IS-5312 (Part-I-2004) with bypass arrangement with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST (As per S/R 2022). |
| 44 | Cost of supplying all materials required for 50 mm dia Air Release Valve PN-1.6 shall confirm to IS 14845 with saddle, Raiser pipe & other fitting materials including all taxes & royalties of materials complete |
| 45 | Cost of supplying all materials required for 150 mm dia Butterfly Valve as per direction of site Engineer in charge including all taxes & royalties of materials. |
| 46 | Cost of supplying 160 X 160 X 110 HDPE Tee with HDPE Tee with GI weldless raiser bend etc. including all taxes & royalties of materials. |
| 47 | Cost of supplying 200 X 200 X 110 HDPE Tee with GI weldless raiser bend etc. including all taxes & royalties of materials complete |
| 48 | Cost of Labour charges and T&P for Installation of monoblock pumpset with 100 mm Ø GI Pipe in suction & delivery side and fittings of priming Tee along with all accessories, sluice Valve, NR Valve etc. and fittings, jointing with HDPE Pressure pipe line in delivery side including cost of transportation |
| 49 | Labour charges for river bank cutting and shaping for construction for PF. |
| 50 | Cost of supplying 160 mm dia HDPE End Cap with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST. |
| 51 | Cost of supplying 200 mm HDPE Elbow spigot design 10 kg. with ISI mark with reputed brand including all cost, conveyance, cess etc. complete but excluding cost of GST. |
| 52 | Labour charges for fitting & fixing of 50 mm Ø CI Air Release Valve complete set with under ground laid HDPE Pipe line |
| 53 | Labour charges for fitting & fixing of 200x200x110/ 160x160x110 mm Ø HDPE Tee with Weldless GI Raiser as per requirement with under ground laid Pipe line |
| 54 | Cost, supplying M.S. Nuts and Bolts (1/2'' to 5/8'') including all cost conveyance, cess etc complete |
| 55 | Cost of supplying 3 mm thick Rubber insertion including cess etc. complete |
| 56 | Cost of supplying 200 X 160 mm Ø HDPE Reducer of 6 kgf/cm2 |
| 57 | Cost of Out let for Tee Tank |
| 58 | 12.5 HP /9.37 KW enery efficiency Mono Block pumpset of total head 20 Mtr having discharge 1700 LPM fitted with bronze impeller TB-2 of IS-318/1981, companion flange and Class F insulation suitable for operation at 415V +6% -15%, 3 phase 50Hz A.C Power including all cost, coveyance and cess etc. complete. |
| 59 | Supplying of Autostar Delta Control Pannel Starter of sheet steel enclosure suitable for operation of 15 HP/5.6 KW squirrel cage induction Motor with 16 amp (AC/3) duty contactor at 415 Volt+6% - 15%, 3 Phase, 50 HZ,AC supply with over load relay range 8.9 Amp to 13.5 Amp. and No volt coil with Electronic timer suitable for operation at voltage of 300 - 400 volt and to provide dependable protection during over load and single phasing including all taxes etc. with ISI make guarantee. |
| 60 | 3x16 sqmm Trapodar cable XLPE (cross link polythein) insulated (HD) ARMOURED Electric cable with alluminum conductor for use in 3 phase power system of working voltage up to & including 11KV 50HZ confirming to IS 7098 (Pt-2) of approved brand of ISI marked including all taxes, cost & conveyance etc. complete. |
| 61 | 63 Amp.T.P. Main switch confirming IS No. 4084 (Part-I & Part-II) with ISI Mark of reputed company with utilisation capacity category AC-22 including fixing in panel board as per direction of site Engineer. |
| 62 | Pipe earthing with 30mm diax 3mtr G.I Pipe with proper slotting-2 nos., 30mm dia G.I Flange-2 no., No.8 G.I Wire-10Kg., Charcol-10bags,salt-100kg.,50mm diam flexible conduit pipe-5 mt.,digging earth pit 2nos., (1.2m x1.2m x3m) and earth trench-3x6.3m x1.0m x6m with transportation, fitting and labour charges etc. complete as per direction of Engineer-In-Charge. |
| 63 | Labour charges for Electrical Installation & energisation |
| 64 | Supplying all materials T&P and labour for wiring of Pump Chamber with required wiring materials like PVC pipe,3/20 PVC Wire, Ampere Tape, PVC Tape, 63 Amp. Kit Kat,12\\"X10\\" Tin Board with fibre plate, Indicator Lamp with holder,angle holder conduit Pipe, Flexible conduite pipe 05 Pin Socket, Wall Clamp, Nut Bolt, 03 Way,100 W Bolt Switch and fitting. Fixing on completion of wiring including supplying,Transportation of materials to work site including cost conveyance royalty taxes of all materials as per direction of Engineer-in-charge. |
| 65 | Supplying all materials T&P and labour for fitting of T.D Cable with Main supply line underground by digging cable,Trench & fitting after laying of cable connection the pannel as required as per direction of the site Engineer-in-Charge. |
| 66 | Supplying of 4 KVAR power shunt capacitor with ISI mark of reputed company including all taxes etc. |
| 67 | Supplying 4 mm2 single core PVC coated Copper wire with ISI mark of reputed company including all taxes etc. |
| 68 | Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 80 Sqmm AAA Conductor average span 40mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, Interposing Pole, Cut-Point and guarding at Road crossings etc as required. including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 69 | Consturction of 3 Phase L.T.line as per REC standard confirming to RE rule 1956 with 200 Kg 8 M long PSC pole support in 0.40M span with 3x35mm² +1x25 mm ² LT x LPE AB cable with all G.I. Channels, Danger Board at each pole, Anti Climbing Devices, Stay set at Bending point and double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, Interposing Pole, Cut-Point and guarding at Road crossings etc as required. including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 70 | Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr / 330 kg 10 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPNODL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPNODL etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender