Tender For Repair Of Fountains And Work Of Installing New Ones Installed In Talkatora Lake
Tender Value
44.56 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
89137
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Of Fountains And Work Of Installing New Ones Installed In Talkatora Lake
BOQ
| Sl. No. | Item Description |
| 1 | (53.7)P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 2 | (53.7.1)1.5 Sq.mm 3 core flat / Round |
| 3 | (53.7.3)4.0 Sq.mm 3 core flat / Round |
| 4 | (NON BSR)Supply, installation & commissioning of Boat Style Floatation System, from an ISO 9001:2008 certified company in the form of two floatation compartment made of Fibre glass reinforced plastic (FRP). Floats immune to rust corrosion or rot. Each FRP float consists of a shell of FRP lamination between 3-4mm thick. This shell shall be completely sealed to prevent ingress of water. To provide for any eventually whereby the shell is holed, it shall be completely filled with closed cell foam which shall prevent the ingress of water. The foam shall be polystyrene and should fill the whole of the shell. The nozzles, water formation head, submersible pumps, lights all are mounted on this glass reinforced plastic white boat with minimum infrastructure. Provision for fixing lights in hidden recesses. An anchoring system with buoys keep the water formation in position but at the same time make it easy to bring the water formation ashore if required. Practical answer to install a water formation in minimum time and without costly civil work.Specifications:Length of Boat: 4.32 mtrWidth of Boat: 1.00 mtrLength of Steel Channels: 2.5 mtrLength of size of Steel Wire Ropes: 3/8” 50 ft x 4 lengthsUnder frame of steel protected by hot dip galvanizing. Fittings in plated steel. Proper anchoring system provided with steel cables and clamps and eye lugs for casting in anchor blocks. |
| 5 | (NON BSR)Providing and fixing of. 6 nos.Cascade jet with 1 nos center jet. thick foam jets inclussive of fountain nozzle each fully adjustable for a precision effect. The pipe should be made of Galvanize Iron with flages, Nut bolts, Gaskets, pipe work, manifold nozzles made of precision machined brass/gun metal including all final finishing work of pipe surface etc.of brass dully choromeplated manufacured. |
| 6 | (NON BSR)Supply and installation of 10 HP submersible monoblock pumpsets of Kirloskar/KSB/Crompton make fit fine stainless steel mesh filter mountable on suction of fountain pump, operative equivalent producing minimum 30mt. high Jet. The pump set must be on gimble system keep the jet vertical. For launching and retrieving the fountain the pump must be winched up to a horizontal position. |
| 7 | (NON BSR)Supply and installation of Electric panel for 10 HP comprises of a sheet metal enclosure with hinged front door, back-wall mounting type with provision for incoming & outgoing cable entry, main switch, overload relays, contactors, overload tripping, CAM operated rotary switch, light sequencer, start stop push button switch & indication lamps etc. complete with internal wiring wiring. Lighting system shall be connected by a separate switch and fuse but shall not be energized unless pumps are first switched on. Electric panels protected against dust and jets of water per rating IP-55 Tested and certified by Govt. of india Test Lab. Electrical panel will be at a distance of as per site condition. |
| 8 | (NON BSR)SITC of IP 68 protected LED underwater lighting system manufactured by ISO 9001:2008 certified company di cast housing 9x3W, 24V DC LED lamps with dynamic color changing capability avilable in quick connecting cable courpled with various mounting accessories, Ability to create 16.7 million uniform, smooth and brilliant colors with out revealing any lamp image. Gland Shall be IP68, including connections with 2.5 sq mm. copper conductor cable etc. as reqd. Luminaries shall have stainless steel AISI 304 top Ring with chrome plated and housing and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. All external nuts bolt and studs of AISI 304 standard stainless steel with high quality elastomer gasket and a toughened glass. Waterproof luminaries shall be waterproof when fully immersed in water per rating IP68 and shall have been tested and certified as such by a Govt. of India Test Laboratory as per direction of engineer-in-charge. |
| 9 | (NON BSR)Supply and fixing of DMX controller for RGB lights upto 12.50 Amps with 12 volt complete as required. |
| 10 | (NON BSR)Anchoring Providing and fixing suitable anchoring of fountains pontoon with nylon rope and CC block anchors. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender