Water Resources and Irrigation Government Departments Closing in 8 days TDR #58562011

Tender For Execution Of Work For Installation And Energisation Of Bamrit-Iv Lift Project Under Paikmal Block In Baragada District.

Issued by Government Departments · Bargarh, Odisha
Tender Value
34.61 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
34617
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Execution Of Work For Installation And Energisation Of Bamrit-Iv Lift Project Under Paikmal Block In Baragada District.

BOQ

Name of Work:- Execution of Work for Installation and Energisation of Bamrit-IV Lift Project under Paikmal Block in Baragada District.
Sl. No. Item Description
1Part-A
2Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge.
3Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%)
4Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
5Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
6Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.a) In foundation and plinth
7b) Brick work with Fly ash bricks of size (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in Superstructure with curing etc.complete as per direction of Engineer-in-charge.
8RRHG Stone Masonary in C.M. (1:6)
9Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge.
10Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) Plinth Bend
11b) Lintel
12c) Chajah
13d) Roof Slab
14R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
152.5mm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
1620mm cement plaster in cement mortar (1:4) finished smooth to stone work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
1712mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
18Providing & supplying of M.S.Rod for for M.S. Reinforcement for R.C.C work including cutting, bending, binding & tying the grills & placing in position including cost of binding wire etc.complete as per direction of Engineer-in-charge
19Writing charges of required data on the wall of pump chamber/Transporency Pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
20Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
21White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge.
22Supply fitting and fixing of Iron Door with Choukat
23Supply fitting and fixing of Iron Window with Choukat
24Painting 2 coats with approved shade of paint after a coat of primer including all cost
25Distempering two coats to walls with distemper of approved shade on new work to give an even shade after 1 coat of white washing
2620mm thick cement plaster (1:4) for grading plaster
27Supply, fitting and fixing of skylight
28Cost of 200 mm Ø HDPE Pipe PN 4 (PE-80)
29Cost of 160 mm Ø HDPE Pipe PN 4 (PE-80)
30Transportation of 200 mm dia HDPE pipe from nearest approved manufacturing units as listed in EPM rate contract to village site of the project
31Transportation of 160 mm dia HDPE pipe from nearest approved manufacturing units as listed in EPM rate contract to village site of the project
32Supplying all materials, labour, T&P for jointing of 200 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge
33Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge
34Filling the foundation and plinth with excavated material as directed by the Engineer-incharge.a) Hard soil
35Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40% i.e. of respective item No. 1 above)
3612.5 HP/9.375 KW Energy efficiency Monoblock pump set of total head 20 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST
37Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
386KVAR Power Shunt Capacitor with ISI mark of of reputed approved brand of ISI marked including all cost, conveyance, cess etc complete but excluding cost of GST
3963 AMP Triple Pole Mainswith confirming to IS No.4064(Part I & II) with ISI marking of reputed company having utilisation capacity cagegory AC- 22 reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
40Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge but excluding cost of GST
41Motor base plate made with M.S angle with one coat of red axide primer and two coats of powder coated paint suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge but excluding cost of GST
423x16 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098 (Pt-II) of approved brand of ISI marked including all cost, conveyance, cess etc complete but excluding cost of GST
43Cost of 4.0mm2 PVC Single Core Copper Wire
44Electrical Earthing
45100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
46100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
47100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete but excluding cost of GST
48100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
49100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
50100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
51200mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
52Cost, supplying of 50mm dia C.I double Air Release Valve with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark
53Cost of 200 x 200 x 160 mm Spigot moulded reducing HDPE Tee 10 kg
54Cost of 200 mm HDPE End Cap
55Cost of 200 mm HDPE Tail piece 160 mm long
56Cost of 160 mm HDPE Tail piece 160 mm long
57100X100X25mm dia G.I.Tee with ISI mark of reputed brand having priming arrangement by locking system including all cost, conveyance, cess etc complete but excluding cost of GST
58Cost of 200mm x 110mm Ø MS Reducer
59Cost of River Bank Cutting and Shaping for Construction of P.F.
60Cost of 150mm Ø Butterfly Valve with all fittings (150mm Ø MS Pipe 1mtr. length, 150mm Ø Socket-2 Nos. and Flange-2 Nos.
61Cost, supplying of 160 mm x 160 mm x 110 mm Ø weldless G.I. Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc. complete
62Cost of 160 mm HDPE End Cap
63Cost of Layout Plan for Works
64Cost of Misc. Welding charges for \\"Z\\" joint, \\"S\\" bend, \\"Y\\" Joint etc.
65Cost of Nut Bolt
66Cost of Rubber Insertion
67Cost of Outlet
68Labour charges for delivery and fitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation
69Cost for Electrical installation and energisation in complete shape
70Supply of small T&P kit comprising of hand gloves-1 pair,tester-1 no, 8 inch cutting plier -1 no, 12 inch sly wrench-1 no, 12 inch Screw driver-1 no. , 24/27 & 21/23 De spanner-2 nos., 24/27 & 21/23 Ring spanner- 2 Nos. (Taparia)
71Cost of digitiliation of pre / post photo, display board in ACP sheets with informatary information as per guide line including fixing all.
72Part-B
73Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 Mtr. long PSC Pole with 55 Sqmm AAA Conductor average span 40 mtr, 11 KV \\"V\\" Cross arm required No. of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I. Channels, Danger Board at each Pole, Anti Climbing Devices, Stay Set and Bending point & double stay at end point with 18mm G.I.H.T. Slay concreting of Stay with Anchor plate, guarding at Road crossings etc. if required including cost of all materials, labour, transportation, erection & commissioning, earthing with chamber etc. complete
74Construction & erection of 11/0.4 KV, 25 KVA Double Pole mounted Sub-Station with 5 mtr. x 3 mtr. x 1.5 mtr. height mesonary toe wall / G.I. Flat fencing boundary wall with Flat with Polymer Insulator, LT Dist. Box with MCCB, Aluminim bus bar of single bay with kitkat fuse, sand filling and metal spreading with M.S. Grill gate, all Channel materials should be G.I., 7 Nos. earthing with chamber with 3 mtr. G.I. pipe of 40mm dia with connecting of 25mm x 5mm G.I. flat to all earthing including 25 KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. long structure, supported in 300 kg. 9 mtr. long PSC pole, transformer hard channel & top channel made of 2.8 Mtr. long 100 x 50 x 6mm G.I. Channel, Transformer belting on 2.80 Mtr. long 50mm x 50mm x 5mm G.I. Angle, (all REC SPN Std. F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B. Switches (F-9) both mounted on 2.8 Mtr. long 75mm x 40mm x 6mm G.I. Channel and supported by 1.0 M long 50 x 50 x 5mm G.I. Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each pole, Anti climbing Devices & all other necessary fitting i.e. required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPWODL specification etc. including cost of all materials, labour, transportation complete with liasioning for testing inspection & commissioning, SITC and Erection of GI fencing / brick masonary boundary wall 16 running metre with grill gate etc. complete but excluding cost of 6% supervision & inspection charges as per specification of TPWODL etc. complete.
759 mtr long 300 kg PSC pole for HT line (including S/S & Tapping PSC Pole)
76Materials for Tapping pole excluding 9 mt long PSC pole as per specification of DISTCOM.
77Boundry wall of Sub-Station (size 15' x 10') with Sand filling and metal spreading, Fixing of Iron gril gate of double doors of 01 mt each to be fixed in proper size of briks. The gate is to be painted with silver coloured enamel paints and lock & key arrangements to be provided etc. as per the direction of the site engineer-in-charge.
78Internal wiring for Pump house as per instruction the direction of the site engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58562011
AUTHORITY Government Departments
TENDER VALUE 34.61 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Execution Of Work For Installation And Energisation Of Bamrit-Iv Lift Project Under Paikmal Block In Baragada District.
Basic Detail
Tender No EE/OLIC/BGH-05/2026-27
Bidding Type Tender
Location
City Bargarh
State Odisha
Key Dates
Publish Date 17 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 34.61 Lakhs
Tender Fee 7080
EMD 34617
Exemption Available
Document List
BOQ_621521.xls
c901f826-1c35-49b4-8236-58ab97a16392.html
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_621521.xls

html

c901f826-1c35-49b4-8236-58ab97a16392.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender