Tender For Installation And Energisation Of Burda-Ii L.I.P Under Gurundia Block
Tender Value
32.59 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
32590
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation And Energisation Of Burda-Ii L.I.P Under Gurundia Block
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%) |
| 3 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 4 | Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 5 | Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.a) In foundation and plinth |
| 6 | b) In Super Structure |
| 7 | Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 8 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) Plinth Bend |
| 9 | b) Lintel |
| 10 | c) Chajah |
| 11 | d) Roof Slab |
| 12 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 13 | 2.5mm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 14 | 20mm cement plaster in cement mortar (1:4) finished smooth to stone work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 15 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 16 | Supplying, fitting and placing uncoated HYSD Bar rain for cement complete as per drawing and tachnical specification as per the direction of Engineer incharge. |
| 17 | Writing charges of required data on the wall of pump chamber/Transporency Pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 18 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 19 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 20 | Supply fitting and fixing of Iron Door with Choukat |
| 21 | Supply fitting and fixing of Iron Window with Choukat |
| 22 | Painting 2 coats with approved shade of paint after a coat of primer including all cost |
| 23 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade after 1 coat of white washing |
| 24 | 20mm thick cement plaster (1:4) for grading plaster |
| 25 | Supply, fitting and fixing of skylight |
| 26 | Cost of 200 mm Ø HDPE Pipe PN 4 (PE-80) |
| 27 | Cost of 160 mm Ø HDPE Pipe PN 4 (PE-80) |
| 28 | Supplying all materials, labour, T&P for jointing of 200 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge |
| 29 | Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge |
| 30 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge.a) Hard soil |
| 31 | Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40% i.e. of respective item No. 1 above) |
| 32 | 12.5 HP/9.375 KW Energy efficiency Monoblock pump set of total head 20 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller |
| 33 | Cost of Control Panel with Automatic Star Delta Starter, relay range 8.9 to 13.5 with MCB for pump up to 15 HP |
| 34 | Cost of 6 KVAR Capacitor |
| 35 | Cost of 63 Amp-400 V.T.P main switch confirming to IS No.4064 |
| 36 | Cost of motor hood made out of 18 gauge CR sheet |
| 37 | Cost of Base plate made of MS Angle with holos |
| 38 | Cost of 3 x 16 mm2 T.D. Cable |
| 39 | Cost of 4.0mm2 PVC Single Core Copper Wire |
| 40 | Cost of 100 mm Ø G.I. Pipe |
| 41 | Cost of 100 mm Ø G.I. Bend |
| 42 | Cost of 100 mm Ø C.I. Foot Valve |
| 43 | Cost of 100 mm Ø G.I. Flange |
| 44 | Cost of 200 mm Ø HDPE Bend |
| 45 | Cost of 100 mm Ø Sluice Valve |
| 46 | Cost of 100 mm Ø C.I. Reflux Valve (NR) |
| 47 | Cost of 50 mm Ø Kirloskar make C.I. double Air release valve with saddle & Raiser pipe |
| 48 | Cost of 200 x 200 x 160 mm Spigot moulded reducing HDPE Tee 10 kg |
| 49 | Cost of 200 mm HDPE End Cap |
| 50 | Cost of 200 mm HDPE Tail piece 160 mm long |
| 51 | Cost of 160 mm HDPE Tail piece 160 mm long |
| 52 | Cost of 100x100x25mm G.I. Tee with ball valve for priming |
| 53 | Cost of 200mm x 110mm Ø MS Reducer |
| 54 | Cost of River Bank Cutting and Shaping for Construction of P.F. |
| 55 | Cost of 160mm Ø Butterfly Valve with all fittings (160mm Ø MS Pipe 1mtr. length, 160mm Ø Socket-2 Nos. and Flange-2 Nos. |
| 56 | Cost, supplying of 160 mm x 160 mm x 110 mm Ø weld less G.I. Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc. complete |
| 57 | Cost of 160 mm HDPE End Cap |
| 58 | Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specifications including laying & fitting |
| 59 | Cost of Misc. Welding charges for \\"Z\\" joint, \\"S\\" bend, \\"Y\\" Joint etc. |
| 60 | Cost of Nut Bolt |
| 61 | Cost of Rubber Insertion |
| 62 | Cost of Outlet |
| 63 | Labour charges for delivery and fitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation |
| 64 | Cost for Electrical installation and energisation in complete shape |
| 65 | Supply of small T&P kit comprising of hand gloves-1 pair,tester-1 no, 8 inch cutting plier -1 no, 12 inch sly wrench-1 no, 12 inch Screw driver-1 no. , 24/27 & 21/23 De spanner-2 nos., 24/27 & 21/23 Ring spanner- 2 Nos. (Taparia) |
| 66 | Cost of digitiliation of pre / post photo, display board in ACP sheets with informatary information as per guide line including fixing all. |
| 67 | Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 400 kg 10 M long PSC Pole with 55 Sqmm AAA Conductor average span 50mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T C Disc. polymer Insulators in tension point with spike provision |
| 68 | Construction and erection of 11 /0.4 KV , 25 KVA (Level-II,Star-II)Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay including tapping pole with material and spike provision |
| 69 | Electrical Earthing including all materials as per the direction of the Engineer- incharge including all Taxes excluding cost of GST. |
| 70 | Construction of 3 Phase L.T line as per REC standard confirming to RE rule 1956 with 300Kg 9 Mtr long PSC pole support in 30M span length with 3x35mm² +1x25 mm ² LT, AB cable with coil earthing device, LT dead end clam, Suspension clamp with spike provision |
| 71 | Spike provisin on 10 mtr & 9 mtr long PSC pole for elephant corridor area as per the direction of the site engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender