Power Government Departments Closing in 3 days TDR #58561281

Tender For Supply Installation Testing and Commissioning of 125 Kva Dg Set And Allied Works At Kerala Infrastructure And Technology For Education (Kite) In Thiruvananthapuram District

Issued by Government Departments · Ernakulam, Kerala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
3 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Supply Installation Testing and Commissioning of 125 Kva Dg Set And Allied Works At Kerala Infrastructure And Technology For Education (Kite) In Thiruvananthapuram District

BOQ

Name of Work:- SITC OF 125 kVA DG SET AND ALLIED WORKS AT KERALA INFRASTRUCTURE AND TECHNOLOGY FOR EDUCATION (KITE) IN THIRUVANANTHAPURAM DISTRICT
Sl. No. Item Description
1ESTIMATE
2OD88602/2026-2027 Supply, unloading, installation, testing and commissioning of 125 kVA Diesel Generator Set with Acoustic Enclosure conforming to CPCB IV+ norms. The DG Set shall have the specifications as follows:- ENGINE Diesel Oil Engine with direct injection, 4 stroke vertical in line cylinders, liquid cooled with specified shaft output after reduction of power for engine Auxiliaries and when operating at a governed speed of 1500 RPM at NTP condition. The engine shall be suitable for continuous duty and shall conform to IS 10000 or other necessary standards as required. The engine shall be with Optimal Operating Efficiency that gives low emission and high efficiency. The engine shall be with all standard specifications, accessories, fittings etc. complete as required ALTERNATOR Self-excited, self-regulated, screen protected, drip proof alternator with static excitation system, capable of developing rated output at 415 V, Power Factor 0.8, Frequency 50 Hz when running at 1500 RPM at NTP conditions and conforming to IS 4722. The Alternator shall be equipped with special windings to reduce harmonics and the same shall be made with Vacuum Pressure Impregnation and epoxy gel coating etc. complete as required CONTROL PANEL Floor mounting sheet steel construction fabricated out of 1.6 mm sheets and with one / two hinged front doors of 2 mm sheet steel bolted back / sides, totally enclosed and vermin proof with the following components. 1 Nos - Genset Controller having Alternator parameters like Voltage, Frequency, Amps, KW, KVAR, PF etc. 3 Nos - 200/5A 5VA CL:1 CT or other Required Rating 1 Nos - Three Phase 4 Wire KWH Meter 1 Set - Aluminium / Copper Busbars of 63A Rating 2 Nos - Indicating lamps showing SET RUNNING and SET ON LOAD 1 Nos - 200A 36kA 4P MCCB with Shunt Release 3 Nos - Instrument Fuses 2 Nos - Earthing Studs etc. complete as required ACOUSTIC ENCLOSURE Fabricated out of 16 SWG CRCA MS sheet with nut bolt type construction, Powder coating shall be done after seven-tank surface preparation process of sheet metal, Canopy panel and doors shall have inside lining of Fire Retardant foam as acoustic material, four hinged doors shall be provided to canopy, one door shall have glass window for control panel etc. complete as required NOISE LEVEL 75 DB at 1 metre from the enclosure surface under free field conditions as per CPCB Norms etc. complete as required BASE FRAME Fabricated in sheet metal, rugged in construction, designed for mounting engine and alternator close coupled, with cross members mounted on AVM, having provision for mounting of acoustic enclosure, lifting hook for convenient lifting of complete set, i.e., along with canopy, engine and alternator etc. complete as required FUEL TANK Removable type fuel tank with 8 hours full load running capacity fabricated out of CRCA MS sheet duly painted and fitted with inlet and outlet connections etc. complete as required ACCESSORIES 1 Nos - Dry 12V Battery 1 Nos - Battery Charger 1 Set - Battery Leads 1 Nos - Exhaust Expansion Bellow etc. complete as required REMOTE MONITORING SYSTEM DG Set shall be linked with a central monitoring data server through SIM and internet in order to view all critical indicators on mobile or laptop with alarms etc. complete as required The scope also includes the testing of Energy Meter, CTs, Relays etc. and obtaining Test Certificates from Electrical Inspectorate (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents). The DG Set shall be provided with a standard warranty of 24 months. The scope also includes providing AMC for a period of 5 Years from the date of installation and commissioning with a minimum of 3 visits per year for necessary checking and for doing any preventive maintenance works
3OD88607/2026-2027 Supply, installation, testing and commissioning of Floor Mounting Cubical Type ATS Panel suitable for 415 V, Three Phase, 4 Wire 50 Hz AC supply system having sufficient front surface area fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame works, covers and gland plates, cleaning and finishing complete with 7 tank process for Powder Coating in approved shade and then provided with Clear Coating, having above 250 Amps capacity type TPN Aluminium alloy / Copper busbars of high conductivity, DMC / SMC / FRP busbar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 3 mm at the rear with 2 Nos. earth stud, solid connections from main busbars to switch gears with approved size of Aluminium busbars and control wiring with 1.5 / 1.0 Sq.mm HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables, cable alleys etc. complete as required. For all MCCBs Ics shall be 100% Icu. The panel shall conform to the Electrical Inspectorate standards and it shall only be manufactured after getting approval from the Engineer in-charge, Consultant and the Electrical Inspectorate. BUSBAR 1 Runs of 40 mm x 10 mm Aluminium for each Phase 1 Runs of 40 mm x 6 mm Aluminium for Neutral EB INCOMER 1 Set - RYB Indication Lamps with Control MCBs 1 Nos - 250A 36kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts, Test Trip Red NO Push Button and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs 1 Nos - 250A 4P AC3 Duty Contactor 3 Nos - 250/5A 10VA CL:1 Tape Wound CT 1 Nos - Digital Multifunction Meter measuring V, A, F, KWH, KVA, PF with Control MCBs 1 Nos - Digital Voltage Protection Relay having Over Voltage Protection, Under Voltage Protection, Phase Unbalance Protection, Phase Failure Protection, Phase Incorrect Sequence Protection, 4 Digits Ultra Bright 7 Segment LED Display, Trip Relay cum DPM with Class 0.5, True RMS Measurement, Previous fault Storage, LED Indication, User Selectable System Sequence, User Selectable 3 Phase 3W or 4W, Adjustable Set Point for Over Voltage, Under Voltage and Phase Failure, Adjustable Time Delay for Over Voltage, Under Voltage and Phase Failure, AND Function, Trip or Buzzer etc. with Control MCBs 1 Nos - 2 Position Key Operated Selector Switch with 1 NO + 1 NC Element (*Key Removable in Both Position) 1 Nos - 8 Module DIN Rail Mounting Type 1 + Type 2 / Class 1 + Class II 100kA SPD on the Incoming / Outgoing Side of Incomer MCCB along with Green (Healthy) and Red (Faulty) Indication Lamps with Control MCBs [The connections to RYB Phases, Neutral and Earth shall be done using 25 Sq.mm HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables with less than 0.45m in length] DG INCOMER 1 Set - RYB Indication Lamps with Control MCBs 1 Nos - 250A 36kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts, Test Trip Red NO Push Button and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs 1 Nos - 250A 4P AC3 Duty Contactor 3 Nos - 250/5A 10VA CL:1 Tape Wound CT 1 Nos - Digital Multifunction Meter measuring V, A, F, KWH, KVA, PF with Control MCBs 1 Nos - Digital Voltage Protection Relay having Over Voltage Protection, Under Voltage Protection, Phase Unbalance Protection, Phase Failure Protection, Phase Incorrect Sequence Protection, 4 Digits Ultra Bright 7 Segment LED Display, Trip Relay cum DPM with Class 0.5, True RMS Measurement, Previous fault Storage, LED Indication, User Selectable System Sequence, User Selectable 3 Phase 3W or 4W, Adjustable Set Point for Over Voltage, Under Voltage and Phase Failure, Adjustable Time Delay for Over Voltage, Under Voltage and Phase Failure, AND Function, Trip or Buzzer etc. with Control MCBs 1 Nos - 2 Position Key Operated Selector Switch with 1 NO + 1 NC Element (*Key Removable in Both Position) AUTOMATIC TRANSFER SWITCH 1 Nos - 250A 4P Automatic Transfer Switch with Interlock ATS shall have the specifications of AC 33B Utilization Category, Solenoid Drive, Integrated Controller Type, Three-Position, Specific Transfer Switching Equipment, Generator Start-Stop Module with Control Function, Provision to add Auxiliary Contacts to indicate mechanical positions if necessary, conforming to IEC 60947-6-1 with CE, CB and RoHS Certification etc. complete as required OUTGOINGS 1 Nos - 200A 25kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts, Test Trip Red NO Push Button and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs and Digital Earth Leakage Relay with CBCT and Control MCBs 1 Nos - 125A 25kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts, Test Trip Red NO Push Button and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs and Digital Earth Leakage Relay with CBCT and Control MCBs 1 Nos - 80A 25kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts, Test Trip Red NO Push Button and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs and Digital Earth Leakage Relay with CBCT and Control MCBs
49.1.27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
59.1.25 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
69.1.21 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
7OD88606/2026-2027 Supplying and making end termination with brass compression gland and Copper lugs for the following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 kV grade etc. complete as required 4 X 2.5 Sq.mm
8OD88591/2026-2027 Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE Aluminium conductor cable of 1.1 kV grade etc. complete as required 3 1/2 X 185 Sq.mm
9OD88620/2026-2027 Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE Aluminium conductor cable of 1.1 kV grade etc. complete as required 3 1/2 X 120 Sq.mm
10OD88621/2026-2027 Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE Aluminium conductor cable of 1.1 kV grade etc. complete as required 3 1/2 X 35 Sq.mm
11OD88590/2026-2027 Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 kV grade etc. complete as required 4 X 2.5 Sq.mm
12OD88605/2026-2027 Excavation of all types of soils for the laying of PVC insulated and PVC sheathed / XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC / Conduit Pipes, Earthing conductors to the required width and depth up to and including 1.0m and back filling etc. complete as required. (The trench dimensions and specifications shall conform to CPWD / PWD, Electrical Inspectorate and KSEBL Standards)
13OD88600/2026-2027 Earthing with ISI Marked Nickel Sealed Copper Bonded 20mm dia, 3.0m long Rod having 250 microns coating thickness with T clamp including Stainless Steel Nuts, Bolts, Round Washers, Spring Washers and other required accessories and providing masonry enclosure with cover plate having locking arrangement with sufficient earthing compound etc. complete as required
14OD88611/2026-2027 Supply and laying of the earthing conductors of the following sizes in existing earth excavated or built up trenches, clamping in trays, walls, racks, risers, trusses etc. using heavy duty Aluminium / GI flats of which spacing between 35cm to 65cm without making holes in the earthing conductor and pulling through pipes including all minor civil works, including connection / terminating with existing Stainless Steel bolts, nuts, round and spring washers after tinning process etc. complete as required. (Jointing shall be done by overlapping and with existing 2 sets of Stainless Steel bolts, nuts, round and spring washers spaced at 50mm) 25 X 3 mm Copper Strip
15OD88601/2026-2027 Supply of Stainless Steel 304 Grade 8mm x 11/4 Inch bolt and its nut, spring washer and double round washers etc. complete as required
16OD88614/2026-2027 Supply of Stainless Steel 304 Grade 6mm x 11/4 Inch bolt and its nut, spring washer and double round washers etc. complete as required
17OD88598/2026-2027 Supply of Stainless Steel 304 Grade 6mm x 1 Inch bolt and its nut, spring washer and double round washers etc. complete as required
18OD88619/2026-2027 Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection etc. complete as required 3.15 mm copper conductor (10 SWG)
1990.16.5.3 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
20OD88608/2026-2027 Supply, fabrication and installation of ATS Panel Board / DG Set Exhaust Piping mounting supports or Cable Tray and supports using MS Angles, Flats and C Channels of adequate size painted with two coats of epoxy primer and two coats of black / grey / other approved shade epoxy paint. The scope also the includes the supply and installation of necessary rectangular / square plates, anchor fasteners, bolts, nuts, round and spring washers or screws etc. complete as required
21OD88597/2026-2027 Supply and providing Extension of DG Exhaust Pipeline using the following sizes of B Class MS pipes with all required accessories like bends, coupling, flanges, flexibles, bolts, nuts, round and spring washers or screws etc. using already fabricated and duly painted existing MS Structural supports etc. and painting the same using 600 Deg.C Heat Resistant Aluminium paints etc. complete as required Up to and including 150mm dia
22OD88593/2026-2027 Supply of all materials and providing extension of already existing Foundation for mounting 125 kVA DG Set including Excavation, PCC, Brick / RCC and Mortar Works etc. complete as required. The finishing of the Foundation shall be done with cement mortar in the ratio 1:3 having a neat appearance. Brick Works if done shall be done with cement mortar in the ratio 1:5. Concrete Mix for PCC Works shall be in M.15 Grade (1:2:4) and RCC Works if done shall be in M.20 Grade (1:1.5:3). The contractor shall submit the drawings of the Foundation to the Engineer-in charge and Consultant for getting approval before the commencement of works or the works shall be executed as per the drawings and directions given to the contractor by the Engineer-in charge and Consultant
23OD88622/2026-2027 Dismantling of already installed 40 kVA Diesel Generator Set with Acoustic Enclosure conforming to CPCB II norms after removing the existing 3.5C x 120 Sq.mm A2XFY Cable including its glanding and terminations, earthing connections, extended exhaust pipes, additional roofings or other structures if any etc. complete as required
24OD88623/2026-2027 Dismantling of already installed 3.5C x 185 Sq.mm A2XFY EB Incomer Cable, 3.5C x 120 Sq.mm A2XFY DG Incomer Cable and 3.5C x 35 Sq.mm A2XFY Outgoing Feeder Cable including its glanding and terminations connected to the 200A On Load Changeover Switch in the Changeover Panel etc. complete as required
252.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
26OD88596/2026-2027 Supply and fixing 2Kg Dry Chemical Powder (DCP) type fire extinguisher complete with Gun Metal cap, hose with squeeze grip nozzle, wall fixing brackets conforming to BIS: 2171 and with ISI mark etc. complete as required
27OD88599/2026-2027 Supply and providing a set of 2 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red oxide paint and written with white paint FIRE and mounted on MS angle iron frame with bracket of appropriate size and capacity including filling sand etc. complete as required
28OD88603/2026-2027 Supply and providing Electrical Grade Rubber Mat of size 2m x 1m having 6mm thickness in front of Panel Boards and DBs conforming to IS 15652 : 2006 standard etc. complete as required
29OD88595/2026-2027 Supply and fixing Laminated Shock Treatment Chart duly mounted on a good frame work etc. complete as required
30OD88594/2026-2027 Preparation and submission of Application, Drawings and obtaining Scheme Approval of 125 kVA DG Set from Electrical Inspectorate. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)
31OD88592/2026-2027 Preparation and submission of Completion Report, Arranging Inspection and obtaining Sanction for Energization of 125 kVA DG Set from Electrical Inspectorate. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)
32EXCLUSIVE OF GST Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58561281
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 24-11-2026
Authority
Authority Name Kerala Electrical And Allied Engineering Co Limited
Work Description Tender for Supply Installation Testing and Commissioning of 125 Kva Dg Set And Allied Works At Kerala Infrastructure And Technology For Education (Kite) In Thiruvananthapuram District
Basic Detail
Tender No KEL/KMEP/EPROC/101/2026-27
Bidding Type Tender
Location
City Ernakulam
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 2950
EMD 50000
Exemption Available
Document List
b28e40ee-a1a0-4e24-8d7a-cd7185ec6e70.html
BOQ_1520184.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

b28e40ee-a1a0-4e24-8d7a-cd7185ec6e70.html

xls

BOQ_1520184.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender