Tender For annual repair & maintenance of (Minor Civil & Electrical Works) For The Financial Year 2026-27 Of Sru Unit At Dalhousie.
Tender Value
17.24 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
19 days left
EMD
34480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of (Minor Civil & Electrical Works) For The Financial Year 2026-27 Of Sru Unit At Dalhousie.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings. |
| 2 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified. |
| 3 | S&F 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified. |
| 4 | M & L for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint as approved by user and directed by Engineer-in-Charge over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge |
| 5 | Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) exc 1.5sqm but n exc 4.0 sqm each |
| 6 | Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n exc 1.5sqm each |
| 7 | S&F pressed steel frames of size 105mmx60mm for doors OF with one or more rebates including necessary fixing lugs, hinges ,lock strike plate ,etc complete all as specified and directed by Enginner in charge |
| 8 | S&F factory made steel window/ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60×25mm including grill using 10sqmm bar double rebated both gauge and glass shutter comprised gauged glazed skelton shutter ERW sec 50×20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T sec 20×3mm complete welded to frame with one vertical mullion of ERW box type T sec of size 60×25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for Each window including following fitting welded to frame shutter :- (a) Hold fast 150mm long of 12×3mm made to shape 04 Nos per window, (b) Handle of Z sec 20×25mm, 100mm long per No leaf, (c) Stainless steel tower bolt 150mm long, 02 Nos per leaf, (d) Z sec 20×25mm, 100mm long stopper 01 Nos per leaf, (e) cleat 55mm long of hollow square 15×20×63mm welded to hinge 01 Nos per leaf,(f) MS pintal hinges of size 75×12mm, 02 Nos per leaf incl. Stainless steel wire cloth , 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty incl. two coats of synthetic enamel paint complete incl taking down existing window/ventilator. Note:- During fixing of windows/ventilator, surfaces shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 9 | S&F 35 mm thick plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated. |
| 10 | S&F 3 mm thick plainsheet glass, ordinary quality and glazing with oil putty in square n exc o.5 sqm each pane all as specified by Engr-in-charge. |
| 11 | S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm in complete fixed with tinned tacks or galvanised wire staples all as specified and as directed |
| 12 | S&F 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engr-in-charge. |
| 13 | S&F 150 mm size aluminium handles, cast type,anodised complete all as specified by Engr-in-charge. |
| 14 | S&F 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified by Engr-in-charge. |
| 15 | S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 16 | M&l for two coat of Synthetic enamel paint over a coat of pink primer on new wood surface of any description not otherwise described over 10cm in width or girth including preparation of new surfaces complete all as specified and all as directed by Engineer-in-Charge. |
| 17 | Demolition of brick work built in CM including all quoins arches pillars etc. |
| 18 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks. |
| 19 | Taking down cement plaster on brick wall upto any height and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and as directed |
| 20 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L 5 mm thick cement plaster in cement mortar 1:3 on celings, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic paint of any shade as approved by GE as per manufacturers instruction complete all as specified and directed by engineer in charge. |
| 24 | M&L for Preparation new surfaces of wall and applying three coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed. |
| 25 | M&L for Preparation of new surface of ceiling and applying three coats of Oil bound distemper over 3mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for Preparation of old decorated wall surfaces and applying two coats of Oil bound distemper on walls over 3 mm thick wall care putty |
| 27 | M&L for Preparation of old decorated ceiling surfaces and applying two coats of Oil bound distemper over 3mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for Complete removal of existing treatment on walls and applying two coats of exterior acrylic paint of any shade in as approved by GE as per manufacturers instruction complete all as specified and directed by engineer in charge. Please Enable Macros to View BoQ information |
| 29 | M&L for Complete removal of existing treatment on walls and applying two coats of exterior acrylic paint of any shade in as approved by GE as per manufacturers instruction complete all as specified and directed by engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender