Tender For Repair / Maintenance Of Pumping Machineries Cleaning Of Oh Tanks And Ug Sumps And Other Allied Misc E/M Works For Water Supply Installations At Acc And S Area Under Ge(S) Ahilyanagar
Tender Value
48 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Pumping Machineries Cleaning Of Oh Tanks And Ug Sumps And Other Allied Misc E/M Works For Water Supply Installations At Acc And S Area Under Ge(S) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 120 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 2 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 100/90 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 3 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 75 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 4 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 60 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 5 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 30 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 6 | Repair/ maintainance/ servicing and checking thoroughly, defective centrifugal pump set of capacity 25 HP by dismantling of pump set at site and checking inspection and replacement of unserviceable spares as required or as directed.Notes :- (a) Spares shall be measured and paid separately under relevant items as 'Supply only'. (b) The work involves proper alignment after repairing, testing, recommissioning the pump set to the entire satisfaction of Engineer-in-Charge. |
| 7 | Supply only gland sleeve for 25 to 30 HP pump set complete all as directed. |
| 8 | Supply only gland sleeve for 60 to 75 HP pump set complete all as directed. |
| 9 | Supply only gland sleeve for 90 to 100 HP pump set complete all as directed. |
| 10 | Supply only gland sleeve for 120 HP pump set complete all as directed. |
| 11 | Supply only gland plate with gland packing, CI, for 25 to 30 HP pump set including nuts and bolts complete all as specified and as directed |
| 12 | Supply only gland plate with gland packing, CI, for 60 to 75 HP pump set including nuts and bolts complete all as directed |
| 13 | Supply only gland plate with gland packing, CI, for 90 to 100 HP pump set including nuts and bolts complete all as directed |
| 14 | Supply only gland plate with gland packing, CI, for 120 HP pump set including nuts and bolts complete all as directed |
| 15 | Supply only water retaining (Deflector) ring for 25 to 30 HP pump set complete all as directed |
| 16 | Supply only water retaining (Deflector) ring for 60 to 75 HP pump set complete all as directed |
| 17 | Supply only water retaining (Deflector) ring for 90 to 100 HP pump set complete all as directed |
| 18 | Supply only water retaining (Deflector) ring for 120 HP pump set complete all as directed |
| 19 | Supply only spilt linter ring, CI, for 25 to 30 HP pump set complete all as directed |
| 20 | Supply only spilt linter ring, CI, for 60 to 75 HP pump set complete all as directed |
| 21 | Supply only spilt linter ring, CI, for 90 to 100 HP pump set complete all as directed |
| 22 | Supply only spilt linter ring, CI, for 120 HP pump set complete all as directed |
| 23 | Supply only cartridge for bearing for 25 to 30 HP pump set complete all as directed |
| 24 | Supply only cartridge for bearing for 60 to 75 HP pump set complete all as directed |
| 25 | Supply only cartridge for bearing for 90 to 100 HP pump set complete all as directed |
| 26 | Supply only cartridge for bearing for 120 HP pump set complete all as directed |
| 27 | Supply only shaft sleeve, CI, for 25 to 30 HP pump set complete all as directed |
| 28 | Supply only shaft sleeve, CI, for 60 to 75 HP pump set complete all as directed |
| 29 | Supply only shaft sleeve, CI, for 90 to 100 HP pump set complete all as directed |
| 30 | Supply only shaft sleeve, CI, for 120 HP pump set complete all as directed |
| 31 | Supply only stuffing box (Throat), CI, for 25 to 30 HP pump set complete all as directed |
| 32 | Supply only stuffing box (Throat), CI, for 60 to 75 HP pump set complete all as directed |
| 33 | Supply only stuffing box (Throat), CI, for 90 to 100 HP pump set complete all as directed |
| 34 | Supply only stuffing box (Throat), CI, for 120 HP pump set complete all as directed |
| 35 | Supply only set of gasket for 25 to 30 HP pump set complete all as directed |
| 36 | Supply only set of gasket for 60 to 75 HP pump set complete all as directed |
| 37 | Supply only set of gasket for 90 to 100 HP pump set complete all as directed |
| 38 | Supply only set of gasket for 120 HP pump set complete all as directed |
| 39 | Supply only set of 'O' ring for 25 to 30 HP pump set complete all as directed |
| 40 | Supply only set of 'O' ring for 60 to 75 HP pump set complete all as directed |
| 41 | Supply only set of 'O' ring for 90 to 100 HP pump set complete all as directed |
| 42 | Supply only set of 'O' ring for 120 HP pump set complete all as directed |
| 43 | Supply only wear ring, for 25 to 30 HP pump set complete all as directed |
| 44 | Supply only wear ring, for 60 to 75 HP pump set complete all as directed |
| 45 | Supply only wear ring, for 90 to 100 HP pump set complete all as directed |
| 46 | Supply only wear ring, for120 HP pump set complete all as directed |
| 47 | Supply only impeller, CI for 25 to 30 HP pump set complete all as directed |
| 48 | Supply only impeller, CI for 60 to 75 HP pump set complete all as directed |
| 49 | Supply only impeller, CI for 90 to 100 HP pump set complete all as directed |
| 50 | Supply only impeller, CI for 120 HP pump set complete all as directed |
| 51 | Supply only pump shaft CI for 25 to 30 HP pump set complete all as directed |
| 52 | Supply only pump shaft CI for 60 to 75 HP pump set complete all as directed |
| 53 | Supply only pump shaft CI for 90 to 100 HP pump set complete all as directed |
| 54 | Supply only pump shaft CI for 120 HP pump set complete all as directed |
| 55 | Dismantling and taking down unserviceable electric motor of 90/ 100/ 120 HP capacity of pump set from foundation and transportation to workshop for repairing, opening and rewinding with new super enamelled copper insulated winding wire as per existing gauge of copper wire, winding with insulating material, varnishing, heating etc and reassembling, transporting back to site of work and installing on existing foundation including proper alignment and testing complete all as specified and as directed.Note :- All disturbed surfaces shall be made good to match the existing surfaces without any extra cost to the department. |
| 56 | Dismantling and taking down unserviceable electric motor of 60 / 75 HP capacity of pump set from foundation and transportation to workshop for repairing, opening and rewinding with new super enamelled copper insulated winding wire as per existing gauge of copper wire, winding with insulating material, varnishing, heating etc and reassembling, transporting back to site of work and installing on existing foundation including proper alignment and testing complete all as specified and as directed.Note :- All disturbed surfaces shall be made good to match the existing surfaces without any extra cost to the department. |
| 57 | Dismantling and taking down unserviceable electric motor of 25 / 30 HP capacity of pump set from foundation and transportation to workshop for repairing, opening and rewinding with new super enamelled copper insulated winding wire as per existing gauge of copper wire, winding with insulating material, varnishing, heating etc and reassembling, transporting back to site of work and installing on existing foundation including proper alignment and testing complete all as specified and as directed.Note :- All disturbed surfaces shall be made good to match the existing surfaces without any extra cost to the department. |
| 58 | S&F in repairs ball bearing suitable for 120 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed |
| 59 | S&F in repairs ball bearing suitable for 90/ 100 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed |
| 60 | S&F in repairs ball bearing suitable for 60/ 75 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed |
| 61 | S&F in repairs ball bearing suitable for 25/ 30 HP capacity pump including bearing checknut, press washer, shaft brass nut including taking out old unserviceable bearing all as specified and as directed |
| 62 | S&F in repairs ball bearing suitable for 120 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed |
| 63 | S&F in repairs ball bearing suitable for 90/ 100 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed |
| 64 | S&F in repairs ball bearing suitable for 60/ 75 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed |
| 65 | S&F in repairs ball bearing suitable for 25/ 30 HP capacity motor including cir clip and taking out old unserviceable bearing all as specified and as directed |
| 66 | S&F in repairs, coupling bushes with studs of existing type and size suitable for 120 HP pump set all as specified and as directed. |
| 67 | S&F in repairs, coupling bushes with studs of existing type and size suitable for 90 HP to 100 HP pump set all as specified and as directed. |
| 68 | S&F in repairs, coupling bushes with studs of existing type and size suitable for 60 HP to 75 HP pump set all as specified and as directed. |
| 69 | S&F in repairs, coupling bushes with studs of existing type and size suitable for 25 HP to 30 HP pump set all as specified and as directed. |
| 70 | S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 120 HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed. |
| 71 | S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 90 HP to 100 HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed. |
| 72 | S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 60 HP to 75 HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed. |
| 73 | S&F in repairs, love-joy / flexible type coupling, made out of MS, complete suitable for 25 HP to 30 HP pump set, including rubber star bush/rubber bush with nut bolts, metal filling existing shaft of motor/ pump and re-grinding, making key slot etc and testing with zero level alignment complete all as specified and as directed. |
| 74 | M&L for repairs to foundation of motor pump set of 120/ 100/ 90 HP by removing and taking out pump motor from foundation by unscrewing the nuts bolts and keeping away, dismantling old foundation, providing new foundation of MS channel MC 75 to MC 150 size, angle section as required at site as directed and strengthing the foundation plate, tightening/ screwing with SS nut bolts, providing UPVC pipe for drainage of water and re-fixing of motor on foundation including welding at proper connections, replacement of foundation nut bolts, washers, with accurate realignment of motor with pump to avoid vibration and to provide smooth running of pump on full load, testing and commissioning complete all as directed. Note:- The quoted rate shall be deemed to be inclusive of all civil works including PCC 1:2:4, type B2 as in foundation and grouting work including necessary form work, plaster etc complete as directed. |
| 75 | M&L for repairs to foundation of motor pump set of 60 / 75 HP by removing and taking out pump motor from foundation by unscrewing the nuts bolts and keeping away, dismantling old foundation, providing new foundation of MS channel MC 75 to MC 150 size, angle section as required at site as directed and strengthing the foundation plate, tightening/ screwing with SS nut bolts, providing UPVC pipe for drainage of water and re-fixing of motor on foundation including welding at proper connections, replacement of foundation nut bolts, washers, with accurate realignment of motor with pump to avoid vibration and to provide smooth running of pump on full load, testing and commissioning complete all as directed. Note:- The quoted rate shall be deemed to be inclusive of all civil works including PCC 1:2:4, type B2 as in foundation and grouting work including necessary form work, plaster etc complete as directed. |
| 76 | M&L for repairs to foundation of motor pump set of 25 / 30 HP by removing and taking out pump motor from foundation by unscrewing the nuts bolts and keeping away, dismantling old foundation, providing new foundation of MS channel MC 75 to MC 150 size, angle section as required at site as directed and strengthing the foundation plate, tightening/ screwing with SS nut bolts, providing UPVC pipe for drainage of water and re-fixing of motor on foundation including welding at proper connections, replacement of foundation nut bolts, washers, with accurate realignment of motor with pump to avoid vibration and to provide smooth running of pump on full load, testing and commissioning complete all as directed. Note:- The quoted rate shall be deemed to be inclusive of all civil works including PCC 1:2:4, type B2 as in foundation and grouting work including necessary form work, plaster etc complete as directed. |
| 77 | S&F in repairs, Pressure gauge complete set with GI bend pipe, nipples, operating switch / valve of capacity 0-100 kgf/sq cm as per sample suitable for 25 to 120 HP pump set complete all as specified and as directed. |
| 78 | Supplying Water testing report from Govt. approved testing center which includes organoleptic and physical parameters to prove the potablity of water from any pump house and the water sample shall be taken jointly by the contractor and rep of Engr-in-Charge for testing of essential characteristics, bacteriological examination all as directed by Engineer-in-Charge. |
| 79 | S&F in repairs, single phase preventor, suitable for 100/ 90/ 75/ 60/ 30/ 25 HP pump set starter, 415/440 Volt, 50 Hz all as specified and as directed. |
| 80 | S&F in repairs, 3 pole power contactors, TYPE -MNX -95 conforming to IS, Amp rating 95 Amps (MNX95) fixed in existing starter complete all as specified and as directed. |
| 81 | S&F in repairs, 3 pole power contactors, TYPE -MNX -70 conforming to IS, Amp rating 70 Amps (MNX70) fixed in existing starter complete all as specified and as directed. |
| 82 | S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-4 starter complete all as specified and as directed. |
| 83 | S&F in repairs, spare contact kit and spare coil conforming to IS suitable for ML-6 starter complete all as specified and as directed. |
| 84 | S&F in repairs 3 pole power contactor ML-2, TP 32 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed. |
| 85 | S&F in repairs 3 pole power contactor ML-3, TP 40 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed. |
| 86 | S&F in repairs 3 pole power contactor ML-4, TP 70 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed. |
| 87 | S&F in repairs 3 pole power contactor ML-6, TP 110 Amps capacity suitable for operation on 415 Volts 50 Hz, AC supply complete all as specified and as directed. |
| 88 | S&F in repairs, spare contact Kit TYPE -ML 2, fixed in existing starter complete all as specified and as directed. |
| 89 | S&F in repairs, spare contact Kit TYPE -ML 4, fixed in existing starter complete all as specified and as directed. |
| 90 | S&F in repairs, spare contact Kit TYPE -ML 6, fixed in existing starter complete all as specified and as directed. |
| 91 | S&F in repairs, spare coil TYPE -ML 2, fixed in existing starter complete all as specified and as directed. |
| 92 | S&F in repairs, spare coil TYPE -ML 4, fixed in existing starter complete all as specified and as directed. |
| 93 | S&F in repairs, spare coil TYPE -ML 6, fixed in existing starter complete all as specified and as directed. |
| 94 | S&F in repairs, Thermal Overload Relay TYPE -ML 2/3, fixed in existing starter complete all as specified and as directed. |
| 95 | Dismantling and taking out unserviceable electric submersible pump set 15HP capacity from borewell and transportation to and from workshop, for repairing and servicing by replacing unserviceable parts such as impeller, bushing , thrust bearing waterseal / coupling etc including re-installing and testing with proper alignment complete all as specified and directed.Note : SS coupling/ adapter shall be measured and paid separately as \\"Supply and fix\\" |
| 96 | S&F SS Coupling to connect DE and NDE ends of motor and pumps with locking pins suitable for 15 HP all as specified and as directed. |
| 97 | S&F SS Coupling / adapter, suitable to connect HDPE pipe to pump outlet with MS clips all as specified and as directed. |
| 98 | Dismantling and taking out unserviceable electric sumersible pump set 2 to 5 HP capacity from borewell and transportation to and from workshop, for repairing and servicing by replacing unserviceable parts such as impeller, bushing , thrust bearing, waterseal / coupling inclu lathe work etc and re-installing and testing with proper alignment complete all as specified and directed. |
| 99 | S & F in replacement Manual Change over switch of capacity 63 Amp complete with all connections including Taking down old change over box all as specified and directed. |
| 100 | S & F in replacement Manual Change over switch of capacity 100 Amp complete with all connections including Taking down old change over box all as specified and directed. |
| 101 | S&F in replacement of On Load Change over switch 415 Volt in sheet metal inclosure, three phase, 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directed . |
| 102 | S&F in repairs, LT panel CT coils as per exiting size and make complete all as specified and directed. |
| 103 | M&L for replacement of R Y B phase indicators complete set of make as per existing complete all as specfied and as directed. |
| 104 | S&F in repairs, PTFE Teflon Graphite gland packing rope of size 10mm/12mm/14mm all as specified and as directed. |
| 105 | Supply only bearing grease HP/BP superior quality all as specified and as directed. |
| 106 | Supply, laying, jointing and testing, ductile iron pipes of 150 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge. Notes :-1) Tyton joints required are deemed to be included in the unit rate quoted. |
| 107 | Supply, laying, jointing and testing, ductile iron pipes of 200 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge. Notes :-1) Tyton joints required are deemed to be included in the unit rate quoted. |
| 108 | Supply, laying, jointing and testing, ductile iron pipes of 250 mm bore with spigot and socket ends, centrifugally cast, class-K 9, conforming to IS 8329 in any length, laid in trenches/ pipe support etc, pressure testing after laying complete as per IS- 12288 including styrene butadiene rubber gasket joints complete all as specified and as directed by Engr-in-Charge. Notes :-1) Tyton joints required are deemed to be included in the unit rate quoted. |
| 109 | Notes for Item No 102 to 104:-1) The Quantity considered in the schedule is tentative. 2) The contractor shall execute the work without disturbing the existing pipe line. Old U/S pipe line shall be removed by the contractor after successful execution of the work.3) Many sewage lines/ chambers and LT/HT/ communication cables are passing through the area, hence due care shall be taken by the contractor during excavation and laying of pipe. Where new pipe line laying crosses the existing sewage line, the contractor shall ensure that the crossing is made using a full length pipe. No joints / fittings shall be permitted within a distance of 2.5 meter in either side of sewage line centre point and PCC 1:3:6 concrete packing shall be provided completely surrounding the sewage line at the crossing as directed to avoid a chance of contamination. Exacavation shall be carried out by manual means in such locations as per directions of Eng in charge. Please note that any damage caused to existing infrastructure shall be made good by the contractor at his own cost and necesaary fiitings and cable joints shall be provided immediately to ensure uninterrupted supply. The damage should be rectified immediately within 06 hrs and any further delay may attract a penalty of Rs 2000.00 per day.4) Contractor shall ensure proper road barricading and safety measures while executing the road cutting work. |
| 110 | S&F cast iron body ball type foot valve flanged of 80mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed. |
| 111 | S&F cast iron body ball type foot valve flanged of 100mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed. |
| 112 | S&F cast iron body ball type foot valve flanged of 150mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed. |
| 113 | M&L for dewatering the UG sump of 5,00,000 gallons capacity, cleaning with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of 50 mm height and 40 mm width complete all as specified and as directed.Location : Dhobi ghat pump house. |
| 114 | M&L for dewatering the UG sump of 5,00,000 gallons capacity, cleaning with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of 50 mm height and 40 mm width complete all as specified and as directed.Location : New KLP pump house |
| 115 | M&L for dewatering the UG sump of 4,00,000 gallons capacity, cleaning with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of 50 mm height and 40 mm width complete all as specified and as directed.Location : J K Road pump house |
| 116 | M&L for dewatering the UG sump of 50,000 gallons capacity, cleaning with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark, Grade-I bleaching powder / Liquid Chlorine, wash with fresh water, drying up and writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of 50 mm height and 40 mm width complete all as specified and as directed.Location : CQAV OHT |
| 117 | M&L for PVC netlon jallies with wooden battens of sectional area n exc 13 Sqcm, wooden beads n exc 75 mm girth duly fixed with nails, and fitted on top entry of over head reservoir and fixed to windows to prevent entry of birds/dirt particles all as specified and as directed. |
| 118 | M&L for taking down carefully, existing unservicable water level Indicator from OH tank/ UG sump and repair the same by replacement of steel wire 4mm dia (8 SWG), MS V shaped pully 3 Nos, PVC Float 01 Nos, MS indicator, scraping, cleaning and painting steel surfaces complete, marking levels with night glow radium paint and fixing in position and testing for proper function complete all as specified and as directed. |
| 119 | M&L for preparation of surfaces of old MS/ CI/ DI pipes and pumps and applying one coat of synthetic enamel paint all as specified and as directed. |
| 120 | Supply and lay DWC cable duct pipe 63 mm dia conformng to IS : 16205 Part-24, 450 N for laying of LT cables etc complete with all accessories all as specified and as directed. |
| 121 | Supply and lay DWC cable duct pipe 110 mm dia conformng to IS : 16205 Part-24, 450 N for laying of LT cables etc complete with all accessories all as specified and as directed. |
| 122 | Supply only calcium hypo chlorite, dry free flowing and free from lumps of following generic specification: (a) Chlorine - Min 65 % (b) Particle size (passing through 1.70 mm IS sieve) - min 99.5 % (c) water insoluble matter - max 6% (d) calcium hydroxide - max 4% (e) Sodium chloride - 15% complete all as specifed and diected . Make : Any make approved by E-in-Cs Branch . |
| 123 | M&L for construction of valve pit/chamber of Internal dimensions 1200 mm x 1200 mm x 1200 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3 coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed. |
| 124 | M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 100mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed. |
| 125 | M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 150mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed. |
| 126 | M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 200mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed. |
| 127 | M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 250mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed. |
| 128 | M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2 Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 300mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed. |
| 129 | S&F in repairs rolled mild steel plates 6mm thick (plain or chequred), channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - O or Fe 310 - O including painting with 2 coats of synthetic enamel paint over a coat of primer all as specified and as directed. |
| 130 | Supply and laying electrical insulation mat of thickness 6 mm of approved quality and specified voltage grade in pump house / control panel area complete in all respect as per relevent standards and site requirement all as per specified and directed by Engr-in-charge. |
| 131 | Supply install in replacement and testing out door wheather proof bus bar chamber of size 100 cm x 60cm x 30cm made out of 3.15mm CRCA MS sheet having one side openable hinged door shuter with looking arangement/provn of two nos 80cm long 40x40x6mm anlge iron legs welded and 04 nos Aluminium bus bar of 200 Amp rating and provn of one MCCB TPN 100 Amp 25 KA for controlling Electric supply complete errected on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland , lugs/thimbles all as specified. |
| 132 | S&F rubber lined non return valve (Ball type) cast iron body, flanged ends, 150 mm bore including neophrene ball and by pass arrangements complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return vave all as specified and as directed. |
| 133 | Supply, Laying and testing in replacement LT UG cable of size 50 sqmm 3 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty,electric cable with copper conductor,1100 Volts grade in trenches /wall /floor /pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 134 | S&F in repairs, three phase DOL starter and all components suitable for 1.5/ 3 HP submersible pump set having relay range 11- 18 Amps or as per existingall as specified and as directed. |
| 135 | S&F in repairs, three phase DOL starter and all components suitable for 3 HP motor, having relay range 13- 21 Amps or as per existing all as specified and as directed. |
| 136 | M&L for Taking up cast iron water mains including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead for 150 mm dia pipe all as specified and as directed by Engr-in-charge. |
| 137 | M&L for Taking up cast iron water mains including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead for 200 mm dia pipe all as specified and as directed by Engr-in-charge. |
| 138 | M&L for Taking up cast iron water mains including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead for 250 mm dia pipe all as specified and as directed by Engr-in-charge. |
| 139 | Excavation in trenches by manual/ mechanical means (Hydraulic excavator) not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of pipe, foundation etc. or for Shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sq m on plan, including dresssing of sides and ramming of bottoms, lift upto 1.5 m, including getting out any type of soil (soft/hard/dense soil) and disposal of surplus excavated soil to a distance not exceeding 50 m complete all as specified and as directed. |
| 140 | Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. |
| 141 | Supply, Laying and testing in replacement LT UG cable of size 185 sqmm 3.5 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty ,electric cable with aluminium conductor,1100 Volts grade in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 142 | Supply, Laying and testing in replacement LT UG cable of size 150 sqmm 3.5 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty ,electric cable with aluminium conductor,1100 Volts grade in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 143 | Supply, Laying and testing in replacement LT UG cable of size 120 sqmm 3.5 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty ,electric cable with aluminium conductor,1100 Volts grade in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 144 | Supply, Laying and testing in replacement LT UG cable of size 95 sqmm 3.5 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty ,electric cable with aluminium conductor,1100 Volts grade in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 145 | Supply, Laying and testing in replacement LT UG cable of size 70 sqmm 3.5 core, XLPE insulated, PVC Sheathed ,ISI marked ,earthed system , armoured heavy duty ,electric cable with aluminium conductor,1100 Volts grade in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs all as specified and directed by Engineer in charge including dismantling and taking out of existing cableNote : Excavation and earth work shall be measured and paid separately. |
| 146 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2020(Part-I) complete all as specified and directed. |
| 147 | S&F in replacement, MCCB 4 Pole, 400 Amps, 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge. |
| 148 | S&F in replacement, MCCB 4 Pole, 250 Amps, 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge. |
| 149 | S&F in replacement, MCCB 4 Pole, 200 Amps, 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge. |
| 150 | S&F in replacement, MCCB 4 Pole, 160 Amps, 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge. |
| 151 | S&F in replacement, MCCB 4 Pole, 125 Amps, 16 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed by Engr in Charge. |
| 152 | M&L for 15mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, including taking down old pipe and fittings complete all as specified and as directed. |
| 153 | M&L for 20mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, including taking down old pipe and fittings complete all as specified and as directed. |
| 154 | M&L for 25mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, including taking down old pipe and fittings complete all as specified and as directed. |
| 155 | M&L for 50mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, including taking down old pipe and fittings complete all as specified and as directed. |
| 156 | M&L for 100mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, including taking down old pipe and fittings complete all as specified and as directed. |
| 157 | S&F in repairs, MCB DB, double door type (when MCBs are to be used), triple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 158 | S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitabl size of copper lugs etc complete all as specified and as directed. |
| 159 | S&F in replacement of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230 volts complete all as specified and as directed. |
| 160 | S&F in replacement 1100 Volt grade, heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed in service connection with twin core cable flat of stranded multistranded aluminium conductor of size 10 Sqmm suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one complete all as specified and as directed. |
| 161 | Supply and fix in replacement post top lantern LED type 25 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI Pipe as per lamp size including connection and testing complete all as specified and directed .Make : Havells cat No CORALPT25WLED757PSYMTOPC or equivalent of makes specified. |
| 162 | S&F in replacement for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, \\"Y\\" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable for upto 150 mm bore pipe complete all as specified and as directed. |
| 163 | S&F in replacement for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces, single branch, \\"Y\\" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable for 200 mm to 600 mm bore pipe complete all as specified and as directed. |
| 164 | M&L for run lead joints suitable for 150mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed. |
| 165 | M&L for run lead joints suitable for 200mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed. |
| 166 | M&L for run lead joints suitable for 250mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed. |
| 167 | M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 15mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed. |
| 168 | M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 20mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed. |
| 169 | M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 25mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed. |
| 170 | M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 40mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed. |
| 171 | M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 50mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make complete all as specified and as directed. |
| 172 | S&F in repairs, GI union ISI marked suitable for the 40/50 mm dia bore of GI pipe complete all as specified and directed . |
| 173 | S&F in repairs, GI union ISI marked suitable for the 25 mm dia bore of GI pipe , complete all as specified and directed . |
| 174 | S&F in repairs, GI union ISI marked suitable for the 20 mm dia bore of GI pipe , complete all as specified and directed . |
| 175 | S&F in repairs, GI union ISI marked suitable for the 15 mm dia bore of GI pipe , complete all as specified and directed . |
| 176 | Cleaning of area around OH tanks, UG sumps, water supply installations by removing of the existing vegetation (i.e. Small trees/ bushes/ plants/ grass, etc) and removing the same from premises all as specified and as directed. |
| 177 | S&F in repairs, LED flood light fitting, 70 watt, 230V AC outdoor type with thermal management in multiple optics and equipped with IP65/66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.Make : - Havells Cat No. JETAALBAFLOODLIGHT70W or equivalent model of makes specified. |
| 178 | M & L for rolled mild steel structural members as in fabrication work as per site requirement in supports of existing foundation / clamps/ plates/ making keys of required lengths with handle to operate all kind of valves from floor level / GL etc. fabricated from structural steel sections including necessary welding / cutting / bending , nuts, bolts, washers , drilling and fixing wherever required and including one coat of primer, one under coat and one finishing coat of paint, steel conforming to Fe-410-W (Grade E-250, Quality-A) all as specified and as directed by Engineer in Charge. |
| 179 | M&L for chamber cover, fabricated out of angle iron of size 40mm x 40mm x 6 mm in framework embedded in PCC coping, 3mm thick MS sheet cover with flat iron 40mm x 6mm all around and diagonally and hinged to the angle iron frame work with locking arragement and handle, duly painted with two coats of anticorrosive bituminous paint over a coat of anticorrosive bituminous primer complete including taking down existing chamber cover all as specified and as directed. |
| 180 | M&L for PCC 1:2:4, type B1, using 20 mm graded stone aggregates including necessary formwork and finishing even and smooth without using extra cement as in paths, hardstanding, in repairs of supporting pillars of pipe, as in floors in pump houses and sub stations complete including demolition of existing deteriorated PCC complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender