Tender For Supply Of Furniture At Area Store Gwalior
Tender Overview
Project Description
Tender for Supply Of Furniture At Area Store Gwalior , Supply Of Furniture , Staff Table: Providing And Supplying Staff Table Of Size 4 Ft × 2 Ft 6 In × 2 Ft 6 In, Made Of 18 Mm Thick Bwr-Grade Plywood Of Approved Quality, With Bis Marking Where Applicable. Top And Outer Sides Shall Have 1.0 Mm Thick Mica Laminate. Inner Surfaces Shall Be Properly Finished / Painted In Approved Shade, Including Putty And Primer. The Table Shall Have Two Drawers On Both Sides (As Stated In Source Specification), Good-Quality Handles, Telescopic Channels And Locks. Complete In All Respects As Per Directions Of The Engineer-In-Charge. , Staff Chair: Supplying And Placing Revolving Staff Chair, Low-Back Type, With Height-Adjustable Gas Lift, Pu Armrests And High-Density Moulded Pu Foam In Seat And Back. Make / Quality Shall Be Approved By The Engineer-In-Charge. , Visitor Chair: Office Chair Of Overall Size Approximately 500 Mm Width × 550 Mm Depth × 820 Mm Height, With Seat Height Approximately 460 Mm. Seat And Backrest Shall Have 50 Mm Pu Foam Of 40 And 32 Density Respectively (As Specified In Source). Seat Front Shall Be Covered With Good-Quality Tapestry Fabric And Back With Abs Plastic Cover. Main Frame Shall Be Ms Steel Pipe, 30 × 10 × 2.0 Mm, Duly Fabricated And Finished. Components Shall Be Properly Pre-Treated And Painted. Complete As Directed By The Engineer-In-Charge.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of furniture |
| 2 | STAFF TABLE: Providing and supplying staff table of size 4 ft × 2 ft 6 in × 2 ft 6 in, made of 18 mm thick BWR-grade plywood of approved quality, with BIS marking where applicable. Top and outer sides shall have 1.0 mm thick mica laminate. Inner surfaces shall be properly finished / painted in approved shade, including putty and primer. The table shall have two drawers on both sides (as stated in source specification), good-quality handles, telescopic channels and locks. Complete in all respects as per directions of the Engineer-in-Charge. |
| 3 | STAFF CHAIR: Supplying and placing revolving staff chair, low-back type, with height-adjustable gas lift, PU armrests and high-density moulded PU foam in seat and back. Make / quality shall be approved by the Engineer-in-Charge. |
| 4 | VISITOR CHAIR: Office chair of overall size approximately 500 mm width × 550 mm depth × 820 mm height, with seat height approximately 460 mm. Seat and backrest shall have 50 mm PU foam of 40 and 32 density respectively (as specified in source). Seat front shall be covered with good-quality tapestry fabric and back with ABS plastic cover. Main frame shall be MS steel pipe, 30 × 10 × 2.0 mm, duly fabricated and finished. Components shall be properly pre-treated and painted. Complete as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender