Educational and Research Institute Government Departments Closing in 4 days TDR #58560626

Tender For Construction Of Additional Layer House At Poultry Farm Under Aicrp On Poultry Breeding, Covas, Cskhpkv, Palampur.

Issued by Government Departments · Kangra, Himachal Pradesh
Tender Value
8.53 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
17080
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Additional Layer House At Poultry Farm Under Aicrp On Poultry Breeding, Covas, Cskhpkv, Palampur.

BOQ

Name of Work:- Construction of Additional layer house at Poultry Farm under AICRP on Poultry Breeding, COVAS, CSKHPKV, Palampur.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 meter in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 meter, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of any meter. All kinds of soil, including entire carriage of material within all leads & lifts.
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) including entire carriage of material within all leads & lifts.
3Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including entire carriage of material within all leads & lifts.
4Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including entire carriage of material within all leads & lifts.
5Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in Cement mortar 1:4 (1 cement :4 coarse sand) including entire carriage of material within all leads & lifts.
6Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including entire carriage of material within all leads & lifts.
7Providing form work Centering and shuttering including strutting, propping etc. and removal of form including entire carriage of material within all leads & lifts.In Lintels, beams, plinth beams, girders, bressumers and cantilevers
8Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including entire carriage of material within all leads & lifts.
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars including entire carriage of material within all leads & lifts. (Amba/Kamdhenu/Jai Bharat make)
10Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of material within all leads & lifts. (Amba/Kamdhenu/Jai Bharat make)
11Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m² including entire carriage of material within all leads and lifts. (Tata make)
12Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/ m² including entire carriage of material within all leads and lifts.
13Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Sal wood including entire carriage of material within all leads & lifts.
14Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including entire carriage of material within all leads & lifts.
15Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm including entire carriage of material within all leads & lifts.
16Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of material within all leads & lifts.200x10 mm
17Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm including entire carriage of material within all leads & lifts.
18Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including entire carriage of material within all leads & lifts.
19Providing and fixing glass strips in joints of terrazp/cement concrete floors 40 mm wide and 4 mm thick including entire carriage of material within all leads & lifts.
20Providing and laying 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand) including entire carriage of material within all leads & lifts.
21Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of material within all leads & lifts.
22Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including entire carriage of material within all leads & lifts. (Nerolac/Asian make 1st quality )
23White washing with lime to give an even shade New work (three or more coats) including entire carriage of material within all leads & lifts.
24Providing plinth protection 50mm.thick in cement concrete 1:3:6 (1cement:3sand:6graded crushed stone aggregated 20mm.nominal size) including entire carriage of material within all leads & lifts.
25Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material within all lead & lifts.
26Providing and fixing chicken mesh of Galvanised MS wire gauge of IS gauge Designation dia 18 gauge & 20mm mesh to windows & clearstorey windows including 40x20mm beading of 1st class deodar wood complete in all respect as per the direction of Engineer-In-charge.
27Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding including entire carriage of material within all lead & lifts.
28Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 metre in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto any metre and lift upto 1.5 metre, as directed by Engineer-in-charge. All kinds of soil including entire carriage of material within all leads & lifts. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58560626
AUTHORITY Government Departments
TENDER VALUE 8.53 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Himachal Pradesh Krishi Vishva Vidyalaya
Work Description Tender for Construction Of Additional Layer House At Poultry Farm Under Aicrp On Poultry Breeding, Covas, Cskhpkv, Palampur.
Basic Detail
Tender No EE CSKHPKV NIT No.2002-07 dt 27/10/2026
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 8.53 Lakhs
Tender Fee 350
EMD 17080
Exemption Not Available
Document List
06c38145-9e96-41fe-845c-9acf701ceec5.html
BOQ_221227.xls
sbd.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

06c38145-9e96-41fe-845c-9acf701ceec5.html

xls

BOQ_221227.xls

pdf

sbd.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender