Petroleum and Natural Gas Boards / Undertakings / PSU Closing in 8 days TDR #58560495

Bids Are invited for Total Amount Including Gst As Per Rfq And Sor For Procurement Of Specialized High Temperature Sensor - Te/Tw,K, Dup,1.5In2500rtj#,Ss321,U320mmaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Eleme

Issued by Boards / Undertakings / PSU · Auraiya, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
8 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Auraiya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Total Amount Including Gst As Per Rfq And Sor For Procurement Of Specialized High Temperature Sensor - Te/Tw,K, Dup,1.5In2500rtj#,Ss321,U320mmaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Pwht, Radiography &Dp Tests, Material Test Certificate, Wake Frequency Calculation & Test.2. Long Studs, Nuts For Rtj Flanges With Vanstone Thermowell Are In Vendors Scope. Vendor Shallprovide The Same With Following Material As Per Piping Class G22g : Stud Material - As Per B18.2,A193 Gr.B16, Nut Material - A194 Gr.4 And Gasket Material : As Per B-16.20-Ansi B16.5,Ss347(140Bhn Max), 2500 , Thermocouple With Well,1.5In300#,680Mmaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Pwht, Radiography &Dp Tests, Material Test Certificate, Wake Frequency Calculation & Test. , Thermocouple , 6 In , K Type , 363 Mm For Pyro Make Duplex Thermocouple With Thermowell No. Of Elements : Duplex Calibration Standard : Iec 60584-2 Element Moc : Chromel-Alumel, Type K Sheath Dia : 6Mm Sheath Material : Inc 800Ht Junction Type: Ungrounded Thermowell Rod Moc : Inc 800Ht Plate Shield Moc : Inc 800Ht Contoured End Plug Moc : 25Cr , 37Ni , Nb , 0.1C Size And Rating : 6 In , 300 Lbs U Length : 363 Mm Temp Range : 840-855 Deg Celsius Service : Furnace Coil Outlet Make : Pyroaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Stress Rupture Test,Aged Ductility Test, Liquid Penetrant Inspection, Pwht, Radiography & Dp Tests, Material Testcertificate, Wake Frequency Calculation & Test.

BOQ

Sl. No. Item TitleItem Description
1TE/TW,K, DUP,1.5IN2500RTJ#,SS321,U320MMAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), PWHT, Radiography &DP tests, Material Test certificate, Wake frequency calculation & test.2. Long Studs, nuts for RTJ Flanges with Vanstone thermowell are in vendor's scope. Vendor shallprovide the same with following material as per piping class G22G : Stud material - As per B18.2,A193 GR.B16, Nut material - A194 GR.4 and Gasket Material : As per B-16.20-ANSI B16.5,SS347(140BHN MAX), 2500TE/TW,K, DUP,1.5IN2500RTJ#,SS321,U320MMAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), PWHT, Radiography &DP tests, Material Test certificate, Wake frequency calculation & test.2. Long Studs, nuts for RTJ Flanges with Vanstone thermowell are in vendor's scope. Vendor shallprovide the same with following material as per piping class G22G : Stud material - As per B18.2,A193 GR.B16, Nut material - A194 GR.4 and Gasket Material : As per B-16.20-ANSI B16.5,SS347(140BHN MAX), 2500
2THERMOCOUPLE WITH WELL,1.5IN300#,680MMAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), PWHT, Radiography &DP tests, Material Test certificate, Wake frequency calculation & test.THERMOCOUPLE WITH WELL,1.5IN300#,680MMAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), PWHT, Radiography &DP tests, Material Test certificate, Wake frequency calculation & test.
3THERMOCOUPLE , 6 IN , K TYPE , 363 MM FOR PYRO MAKE DUPLEX THERMOCOUPLE WITH THERMOWELL NO. OF ELEMENTS : DUPLEX CALIBRATION STANDARD : IEC 60584-2 ELEMENT MOC : CHROMEL-ALUMEL, TYPE K SHEATH DIA : 6MM SHEATH MATERIAL : INC 800HT JUNCTION TYPE: UNGROUNDED THERMOWELL ROD MOC : INC 800HT PLATE SHIELD MOC : INC 800HT CONTOURED END PLUG MOC : 25CR , 37NI , NB , 0.1C SIZE AND RATING : 6 IN , 300 LBS U LENGTH : 363 MM TEMP RANGE : 840-855 DEG CELSIUS SERVICE : FURNACE COIL OUTLET MAKE : PYROAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), Stress Rupture Test,Aged Ductility Test, Liquid penetrant inspection, PWHT, Radiography & DP tests, Material Testcertificate, Wake frequency calculation & test.THERMOCOUPLE , 6 IN , K TYPE , 363 MM FOR PYRO MAKE DUPLEX THERMOCOUPLE WITH THERMOWELL NO. OF ELEMENTS : DUPLEX CALIBRATION STANDARD : IEC 60584-2 ELEMENT MOC : CHROMEL-ALUMEL, TYPE K SHEATH DIA : 6MM SHEATH MATERIAL : INC 800HT JUNCTION TYPE: UNGROUNDED THERMOWELL ROD MOC : INC 800HT PLATE SHIELD MOC : INC 800HT CONTOURED END PLUG MOC : 25CR , 37NI , NB , 0.1C SIZE AND RATING : 6 IN , 300 LBS U LENGTH : 363 MM TEMP RANGE : 840-855 DEG CELSIUS SERVICE : FURNACE COIL OUTLET MAKE : PYROAddl Description:TEST REQUIREMENTS ARE MENTIONED AS UNDER:1. IBR (For Temperature Elements under IBR service, Carbon contents in steel shall not exceed0.25% for flanges, body parts etc. or any part that may require welding. Moreover the sulphur andphosphorous contents shall also be limited to 0.05% each) , Accuracy test, Response Time test, IR& Hot IR test, Continuity & polarity test, N2 Test, Hydrotest (200kg/cm2), Stress Rupture Test,Aged Ductility Test, Liquid penetrant inspection, PWHT, Radiography & DP tests, Material Testcertificate, Wake frequency calculation & test.

AI Tender Summary

OUR REF NO 58560495
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Gas Authority Of India Limited
Work Description Bids Are invited for Total Amount Including Gst As Per Rfq And Sor For Procurement Of Specialized High Temperature Sensor - Te/Tw,K, Dup,1.5In2500rtj#,Ss321,U320mmaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Pwht, Radiography &Dp Tests, Material Test Certificate, Wake Frequency Calculation & Test.2. Long Studs, Nuts For Rtj Flanges With Vanstone Thermowell Are In Vendors Scope. Vendor Shallprovide The Same With Following Material As Per Piping Class G22g : Stud Material - As Per B18.2,A193 Gr.B16, Nut Material - A194 Gr.4 And Gasket Material : As Per B-16.20-Ansi B16.5,Ss347(140Bhn Max), 2500 , Thermocouple With Well,1.5In300#,680Mmaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Pwht, Radiography &Dp Tests, Material Test Certificate, Wake Frequency Calculation & Test. , Thermocouple , 6 In , K Type , 363 Mm For Pyro Make Duplex Thermocouple With Thermowell No. Of Elements : Duplex Calibration Standard : Iec 60584-2 Element Moc : Chromel-Alumel, Type K Sheath Dia : 6Mm Sheath Material : Inc 800Ht Junction Type: Ungrounded Thermowell Rod Moc : Inc 800Ht Plate Shield Moc : Inc 800Ht Contoured End Plug Moc : 25Cr , 37Ni , Nb , 0.1C Size And Rating : 6 In , 300 Lbs U Length : 363 Mm Temp Range : 840-855 Deg Celsius Service : Furnace Coil Outlet Make : Pyroaddl Description:Test Requirements Are Mentioned As Under:1. Ibr (For Temperature Elements Under Ibr Service, Carbon Contents In Steel Shall Not Exceed0.25% For Flanges, Body Parts Etc. Or Any Part That May Require Welding. Moreover The Sulphur Andphosphorous Contents Shall Also Be Limited To 0.05% Each) , Accuracy Test, Response Time Test, Ir& Hot Ir Test, Continuity & Polarity Test, N2 Test, Hydrotest (200Kg/Cm2), Stress Rupture Test,Aged Ductility Test, Liquid Penetrant Inspection, Pwht, Radiography & Dp Tests, Material Testcertificate, Wake Frequency Calculation & Test.
Basic Detail
Tender No GEM/2026/B/8278759
Bidding Type Tender
Location
City Auraiya
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
3f6a35af-0ba4-467c-aae1-110405d64fbc.pdf
1794814085.xlsx
gemscc_2026-11-16-12-48-28_8bd74b8c0fbf00547c77e6f16ec52bf0.pdf
RFQ_4d655122-3ee0-461f-9ca11794814236646_BUYERPATA69.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
pdf

3f6a35af-0ba4-467c-aae1-110405d64fbc.pdf

xlsx

1794814085.xlsx

pdf

gemscc_2026-11-16-12-48-28_8bd74b8c0fbf00547c77e6f16ec52bf0.pdf

pdf

RFQ_4d655122-3ee0-461f-9ca11794814236646_BUYERPATA69.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender