Tender For Provision Of Certain E/M Items At Various Pol/Hygiene Chemical Stores And Allied Works Services & Provn Of Hose Ramp At Air Force Station Arjan Singh Under Ge (Af) Panagarh
Tender Value
17.50 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
35000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain E/M Items At Various Pol/Hygiene Chemical Stores And Allied Works Services & Provn Of Hose Ramp At Air Force Station Arjan Singh Under Ge (Af) Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation etc. or for shafts, wells, cesspits, manholes, pier hols etc. n. exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed |
| 2 | Returning, filling in trenches of any type of soil including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed |
| 3 | Removing of excavated soil exceeding 250 m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed. |
| 4 | M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for brick work using fly ash bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 6 | M&L for brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick on concrete/brick surface on wall in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for hard core (broken stone) of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick watered and well rammed to a true surface complete all as specified and directed. |
| 9 | M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and as directed. |
| 10 | M&L for 50mm thick PCC type B-0, (1:2:4) (using 12.5mm graded crushed stone aggregate) as in floor finishes complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surface and applying two coats of exterior emulsion paint (Apex ultima) over one coat of alkali resisitant primer paint as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE.(Note:- (i) After painting works, cleaning of all floors, glass and furniture by own arrangement. (ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 12 | Surface dressing n exc 15 Cm deep in soft / loose soil and site clearance complete all as specified and as directed. |
| 13 | M&L for pre polished chequered cement concrete tile 25 cm X 25 cm X 25 mm thick with mixture of white & grey cement in equal propotion and no pigments machine pressed set jointed and pointed in neat cement slurry in floors, over screed bed or bedding layer of 15 mm thick cement mortar( 1:4) for laying floor finishes complete all as specified and as directed by Engineer-in-Charge . |
| 14 | M&L for sand filling under floors or in foundations including watering and consolidation, spreading and well ramming in layers n exc. 25 cm thick complete all as specified and as directed by Engineer-in-Charge . Please Enable Macros to View BoQ information |
| 15 | M&L for sand filling under floors or in foundations including watering and consolidation, spreading and well ramming in layers n exc. 25 cm thick complete all as specified and as directed by Engineer-in-Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender