Tender For Periodical Services And Repairs To Joinery, Plumbing And Certain Misc Works At Ascon Nods And Hatma Under Ge (A) Barmer
Tender Value
20 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services And Repairs To Joinery, Plumbing And Certain Misc Works At Ascon Nods And Hatma Under Ge (A) Barmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat with shutter shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 2 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed. |
| 3 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Accepting Officer(a) Aluminium anodized Butt Hinges 125mm - 3 Nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 Nos per leaf(c) Aluminium anodized Handles 200 mm - 2 Nos per leaf |
| 4 | S & F Spray duco painted Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 5 | S & F Spray duco painted Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 6 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 7 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 8 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and and plywood face panels, commercial type on both sides complete all as specified and including supply and fixing following items As approved by Accepting Officer :(a) Aluminium anodized Butt Hinges 125mm - 3 Nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 Nos per leaf(c) Aluminium anodized Handles 200 mm - 2 Nos per leaf(d) Aluminium anodized Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Aluminium anodized Floor Door Stooper - 1 No per leaf |
| 9 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR- Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Aluminium anodized Butt Hinges 125mm - 3 nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 nos per leaf(c) Aluminium anodized Handles 200 mm - 2 nos per leaf(d) Aluminium anodized Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Aluminium anodized Floor Door Stooper - 1 nos per leaf |
| 10 | M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed. |
| 11 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and as directed.(Note : Hinges shall be measured and paid separately) |
| 12 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors, complete all as specified and as directed. and directed. |
| 13 | S & F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass i.e tempered/ laminated/plain /glazed above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys, hydraulic door closer/floor spring etc complete all as specified and directed approved by accepting officer including taking down of old existing door of any nature and supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 14 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified.including taking down of old existing windows of any naturemode of measurment :-( Clear opening will be measured ) |
| 15 | M&L rendering 15mm thick on stone masonary surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 including taking down of old plaster of any nature and any thickness complete all as specified and directed. |
| 16 | M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all including taking down of old plaster of any nature and any thickness as specified and directed. |
| 17 | M&L 15mm thick cement plastering on concrete surfaces in CM (1:4) finishing surfaces even and smooth without using extra cement including taking down of old plaster of any nature and any thickness complete all as specified and as directed. |
| 18 | M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for preparation of newly plastered surfaces ceiling and applying complete ceiling three coats of white wash all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint @ 5sq.m/kg/1 coat over a one coat of of external primer by using following brands of cement base paint complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) |
| 21 | S & F for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe , Ball valve and provision of wash out pipe etc including taking down existing tank complete . |
| 22 | All as per item No. 21.00 here-in-above but tanks of 1000 Litres capacity, |
| 23 | S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified. |
| 24 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 all as directed and specified. |
| 25 | S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. |
| 26 | S & F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. |
| 27 | S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete |
| 28 | S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 29 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Note : The items for counter will be measured and paid separately. |
| 30 | S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete. |
| 31 | S&F in repair PVC connection 600mm long and 15 mm dia with brass fly nut at both ends complete. |
| 32 | S&F in repair Jet Spray (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.00 metre long flexible tube including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 33 | S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 34 | Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. as approved by accepting officer |
| 35 | S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. |
| 36 | S&F in Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified. |
| 37 | S&F in repairs of 32mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms.for kitchen sink |
| 38 | S & F in repair Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified. |
| 39 | S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in charge. |
| 40 | Supply & Fixing in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 41 | Supply & Fixing in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 42 | Supply & Fixing in repair 25 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 43 | S&F in repairs 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S&F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 45 | S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. Make: Prayag & equivalent. |
| 46 | S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 47 | Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc. |
| 48 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type. |
| 49 | S & F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified. |
| 50 | S&F in repairs 15mm bore stop valves/angle cock , cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 51 | S&F in repairs 15mm dia two way angle cock of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed. |
| 52 | S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete. |
| 53 | Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and directed. |
| 54 | S & F PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet all as specified and directed. |
| 55 | S & F in repairs Stainless steel gratings with frame, 140 mm dia, with hole for waste pipe connection all as specified and as directed. |
| 56 | M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair. |
| 57 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete. |
| 58 | S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door all as specified and directed |
| 59 | S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door all as specified and directed |
| 60 | S&F in repairs PVC (SWR) bends 75 mm dia any radius all as specified and directed |
| 61 | S&F in repairs PVC (SWR) bends 110 mm dia any radius all as specified and directed |
| 62 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete. |
| 63 | S&F in repairs PVC (SWR) bends 110 mm dia any radius with access door all as specified and directed |
| 64 | S&F in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door all as specified and directed |
| 65 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 66 | Dismantling of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 67 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 68 | M & L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring / hard standing as specified |
| 69 | M&L for cement concrete 1:2:4, type B-1 (20mm graded aggregate) as in floors,hardstanding without using extra cement complete all specified and directed. |
| 70 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in flooring finished even and fair under floor finishes. |
| 71 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 72 | M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk |
| 73 | M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 74 | All as per item No. 73.00 here-in- above but in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 75 | M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 76 | All as per item No. 75.00 here-in- abovebut as in skirting over 10mm thick cement mortar backing plaster in CM1:3 |
| 77 | M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by accepting officer . |
| 78 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 79 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk |
| 80 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. |
| 81 | M&L for Kota stone slab 20-25mm thick (in single piece as vertical support and horizointal base for granite top) laid over 15mm thick screed bed in cm 1:6in cooking platform, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed. |
| 82 | M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match |
| 83 | Demolition of brickwork or stone, PCC block, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 84 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 85 | M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 86 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer and 2.00 mm thick wall care putty complete all as specified and directed. |
| 87 | M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 all as specified. |
| 88 | Cutting chases, holes in Brick walls, Stone walls, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. |
| 89 | Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 90 | M & L for complete removal of existing treatment including removing unnecessary nails including filling of cracks/holes by crack filler and applying two coats of 100 % premium exterior acrylic emulsion paint of first quality of required shade,Make Apex Ultima of Asian Paint or long life of berger or Excel Everlast 12 of Nerolac, over a coat of primer on wall as directed by engr in charge having VOC less then 50gm/litre and UV resisitance as per IS 15489:2004,Alkali & fungal resisitance, dirt resisitance exterior paint of required shade ( Company Depot tinted) with silicon additives @1.00 litre/ 10 sqm, including necessary scaffolding for any height complete all as specified and as directed. NOTE:- 1) Scraping /complete removal will be carried out by mechanical means/grinder including necessary scaffolding. 2) painting will be done in Camouflage pattern complete all as specified and directed. |
| 91 | All as specified in Item No 90.00 above but applying two coat of cement base paint @ 5sq.m/kg/1 coat over a coat of primer on wall by using following brands of cement base paint including necessary scaffolding for any height complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) NOTE:- 1) Scraping /complete removal will be carried out by mechanical means/grinder including necessary scaffolding. 2) painting will be done in Camouflage pattern complete all as specified and directed. |
| 92 | All as specified in Item No 90.00 but Applying two coat of oil bond distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 1mm )thick including necessary scaffolding arrangement for any height as required at site all as specified and directed. Please Enable Macros to View BoQ information |
| 93 | All as specified in Item No 90.00 but Applying two coat of oil bond distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 1mm )thick including necessary scaffolding arrangement for any height as required at site all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender