Tender For Replacement Of Ash Disposal Pipe Lines From Plant Boundary To Ash Pond At Nalco, Damanjodi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Dec 2026
12 days left
EMD
40000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Ash Disposal Pipe Lines From Plant Boundary To Ash Pond At Nalco, Damanjodi
BOQ
| Sl. No. | Item Description |
| 1 | 02.08.00) Earthwork in all kinds of soil in foundation, trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed, complete as directed by the Engineer-in-charge. |
| 2 | 02.08.01) Same as item (02.08.00) above but lift upto 1.5m in all type of soil. |
| 3 | 02.25.00) Back filling with the available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5 m. |
| 4 | 02.31.00) Bush / Grass cutting over area with necessary tools, tackles, cleaning the site, making stack at specified locations, all complete as specified by the Engineer-in-Charge. |
| 5 | 04.01.00) Providing and laying plain cement concrete at all depths below and up to ground level in foundations, fillings, non-suspended floors including tamping, curing etc. But excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete (using Nowrangpur quality sand) [CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE POINT]. |
| 6 | 04.01.03) P.C.C. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) etc. |
| 7 | 05.02.00) Providing and laying reinforced cement concrete work in roofs, slabs, lintels, beams, chajjas, coloums,walls in vertical or horizontal, fins,bressummers,shelves, suspended floors, landing, balconies, pillars,piers,abutments,posts and struts etc.in super structure at all heights including necessary curing, finishing and plastering the exposed surface with cement mortar 1:3(1 cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. complete(using Nowrangpur quality sand)( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE POINT). |
| 8 | 05.02.03) Same as above item in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggregate of 20mm & down size). |
| 9 | 05.09.05) Centering and shuttering including strutting, propping etc. and removal of frame work for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillars, posts, struts and stair cases and all types of RCC work at all heights in any floor as directed by Engineer-in-Charge. |
| 10 | 05.22.03) Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming to IS:1786 for R.C.C. work at all height and depths, carrying the same from store / issue points to work site, straightening, cleaning, bending to required shape and lengths as per details, including supplying soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused / scrap / unserviceable steel to owner's storage point etc. all complete. [REINFORCEMENT STEEL / TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE POINT]. |
| 11 | 10.01.00) Fabrication and fixing of Pipe supports with M.S.Channels, Angles, MS rounds etc. to hold down the Pipes in position including taking delivery from NALCO's store, the required steel sections/rounds etc & also including all tools tackles, consumables and labour etc all complete as per the direction of Engineer-in-charge. (REQUIRED STEEL SECTIONS SHALL BE ISSUED FREE OF COST FROM NALCO's STORE POINT) |
| 12 | 10.02.02) Fabrication & Erection of structural steel work true to level and alignment as per drawings and specifications and instruction of Engineer-in-charge including making arrangements for transportation from central store to required location / erection site etc. all complete including all labour, tools, tackles, consumables etc at all heights as per site requirements. (REQUIRED STRUCTURAL STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE POINT). |
| 13 | 13.61.00) Painting with approved quality synthetic enamel paint for steel, pipe work of approved brand and manufacturer in all shades on old / new work to give an even shade over a coat of primer after preparation of all surfaces etc. complete as directed by Engineer-in-charge. (Required enamel paint and primer paint will be supplied by contractor only). (OF ASIAN / SHALIMAR / JOHNSON & NIKOLSON / BURGER MAKE PAINTS). |
| 14 | 13.61.01) Two coats over one coat of primer. |
| 15 | 15.03.00) Dismantling of R.C.C. work including stacking of bars and disposal of un-serviceable materials with in 50 mtrs. lead as directed by the Engineer-in-charge with all complete. |
| 16 | 15.18.00) Dismantling of structural steel works of all types at all heights including making the cut edges smooth by grinding etc. The dismantled members are to be lowered carefully as specified by Engineer-in-charge without any damage etc all complete.The mode of dismantling shall be approved after mutual discussion in advance with the Engineer-in-charge. |
| 17 | 32.04.00) Return of old pipes, supports, scrap materials, etc. or any other materials from site to the NALCO's store or to any other places as directed by Engineer-in-charge. |
| 18 | 33.01.00) Replacement of the rubber gasket of the sleeve coupling of all types and sizes of Ash Disposal pipe line including removal of sleeve coupling and re-fixing of the same at its original location along with the new / serviceable rubber gaskets at all locations like pipe rack, pipe sleeprs etc. at any heights including all tools, tackles, labours, equipements and consumables required for completion of work as per the instruction of Engineer-in-Charge. (REQUIRED RUBBER GASKETS SHALL BE ISSUED AT NALCO's STORE POINT IN FREE OF COST) |
| 19 | 33.02.00) Replacement of sleeve coupling at all type & size in Ash Disposal line. The job includes removal of old damaged coupling, fixing of new set of coupling with rubber gaskets and nut-bolts. Job to be done at all locations, heights including supply of tools, tackles, labours and consumables etc. all complete as per the direction and instruction of Engineer- in-Charge. ( REQUIRED SLEEVE COUPLING SHALL BE ISSUED FREE OF COST AT NALCO's STORE POINT). |
| 20 | 33.02.01) Fixing or removal of sleeve coupling set. |
| 21 | 33.04.00) Repair of ERW pipe line as and when required by providing a pad plate after cutting the pad plate out of available / damaged pipes and making fit-up, tack welding, finally full welding to make the pipe line leak proof with all labours, consumables, tools, tackles, plant & equipments etc. (e.g. diesel welding generator etc. for cross country works) including required transportation of man & materials etc. all complete as per the instruction of Engineer-in-charge. [REQUIRED SCRAP PIPE FOR PAD PLATE SHALL BE SUPPLIED AT FREE OF COST] (THE PAYMENT SHALL BE MADE FOR SINGLE LENGTH OF PAD PLATE). |
| 22 | 33.05.00) Dismantling of pipeline of following diameters / pipes / sprinklers at any location / elevation in Ash & Red mud reclamation lines & disposal lines / water supply mains with all labours, tools, tackles, consumables & supervision etc. all complete as per the instruction of Engineer-in-charge. |
| 23 | 33.05.02) 250mm dia pipe. |
| 24 | 33.05.03) 300mm dia pipe. |
| 25 | 33.06.00) Fabrication, erection & testing of the MS / CS pipeline (Pipe ends are to be bevelled and joined by welding or coupling or bolting) of following diameters / pipes at any / all location / elevation at pipe rack or pipe sleepers with all labours, tools, tackles, consumables, plant & equipments with necessary padding if required at each pipe pedestal and supervision, etc. all complete as per the instruction of Engineer-in-charge.(The job includes transportation of pipes from Nalco's store point to the workspot, marking of chainage of the replaced pipe, chainage marking at 25 mtrs. distance interval, date of replacement & line number.) No extra payment will be made for putting couplings in between the replaced pipes as and when required. (REQUIRED PIPES & COUPLINGS SHALL BE ISSUED FREE OF COST AT NALCO's STORE POINT). |
| 26 | 33.06.02) 250mm dia pipe. |
| 27 | 33.06.03) 300mm dia pipe. |
| 28 | 33.10.00) Miscellaneous piping works of following description for pipe modification / rectification etc. which are not envisaged in any other item including all labours, tools, tackles, consumables, plant and equipments at any / all location / elevations as per instruction of Engineer-in-charge. |
| 29 | 33.10.01) Cutting and bevelling of pipes of all diameters. |
| 30 | 33.10.02) Fit-up and tack welding of pipes of all diameters . |
| 31 | 33.10.03) Full welding of pipes of all diameters after tack-welding (5mm to 10mm thick weld) |
| 32 | 33.35.00) Fabrication of mitre bend of all angles as specified below from 150mm upto 350 mm diameter pipes as per piping specifications including supply of all consumables, labours, equipments, tools, tackles etc. all complete as per drawings, specification & instruction of Engineer-in-charge. |
| 33 | 33.35.05) 90 / 60 degree with 3 cut welds out of 10\\" dia pipe. |
| 34 | 33.35.06) 45/30/22 1/2/15 degree with 2 cut welds out of 10\\" dia pipe. |
| 35 | 33.35.07) 90 / 60 degree with 3 cut welds out of 12\\" dia pipe. |
| 36 | 33.35.08) 45/30/22 1/2/15 degree with 2 cut welds out of 12\\" dia pipe. |
| 37 | 33.36.00) Erection of bends of all sizes. |
| 38 | 33.36.04) Erection of bends of all degrees of 12\\"(300 mm) dia. |
| 39 | 33.52.00) Fabrication of EQUAL / UNEQUAL TEES of all kinds as specified below from 150 mm upto 350 mm diameter pipes as per piping specifications including supply of all consumables, labours, equipments, tools, tackles etc. all complete as per drawings, specification & instruction of Engineer-in-Charge. (REQUIRED PIPES & FLANGES WILL BE SUPPLIED AT FREE OF COST FROM NALCO STORE POINT). |
| 40 | 33.52.03) 250 mm dia |
| 41 | 33.52.04) 300 mm dia. |
| 42 | 33.53.00) Erection of EQUAL / UNEQUAL TEES of all kinds as specified below from 150 mm upto 350 mm diameter pipes as per piping specifications including supply of all consumables, labours, equipments, tools, tackles etc. all complete as per drawings, specification & instruction of Engineer-in-Charge. (REQUIRED PIPES & FLANGES WILL BE SUPPLIED AT FREE OF COST FROM NALCO STORE POINT). |
| 43 | 33.53.03) 250 mm dia |
| 44 | 33.53.04) 300 mm dia. |
| 45 | 41.20.00) Blind fixing/Removal from 10\\"(250 mm) dia. upto 14\\"(350 mm) dia. pipe in Ash & Red Mud pipe line area as and when required. [REQUIRED BLIND WILL BE SUPPLIED AT FREE OF COST FROM NALCO's STORE POINT]. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender