Public Administrative Department Local Bodies Closing in 2 days TDR #58558271

Tender For Urgent Providing And Fixing Of Public Health Fixtures And Other Allied Works At Toilet Block In Infosys Foundation Red Cross Sarai, Sector 12, Chandigarh. (Ch. To : Revenue Head).Approx. Amount : Rs. 9,99,858/-; Emd : Rs. 19,997/- ; Time L

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
19998
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Urgent Providing And Fixing Of Public Health Fixtures And Other Allied Works At Toilet Block In Infosys Foundation Red Cross Sarai, Sector 12, Chandigarh. (Ch. To : Revenue Head).Approx. Amount : Rs. 9,99,858/-; Emd : Rs. 19,997/- ; Time Limit : 1 Month.

BOQ

Name of Work:- URGENT PROVIDING AND FIXING OF PUBLIC HEALTH FIXTURES AND OTHER ALLIED WORKS AT TOILET BLOCK IN INFOSYS FOUNDATION RED CROSS SARAI, SECTOR 12, CHANDIGARH. (CH. TO : REVENUE HEAD).APPROX. AMOUNT : Rs. 9,99,858/-; EMD : Rs. 19,997/- ; TIME LIMIT : 1 Month.
Sl. No. Item Description
1Dismantling existing floor tiles with cement motor including stacking of serviceable materials and disposal of unserviceable material upto a lead of 50 meters (NSI)
2Dismantling existing wall tiles and floor tiles with cement motor including stacking of serviceable materials and disposal of unserviceable material upto a lead of 50 meters (NSI)
3Dismantling G.I. pipes (internal & external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge 15 mm to 40 mm nominal bore (DSR No. 15.44.1)
4Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge (DSR No. 14.82)
5Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead (DSR No. 15.52)
6Dismantling Wash hand basin with existing CI brackets & fitting of all sizes including handing over the material to department all complete as per directions of Engineer-in-Charge.(Extra Item) (NSI)
7Providing and fixing soil, waste and vent pipes Sand cast iron S&S pipe as per IS: 1729 (DSR 17.35)
8100 mm dia (DSR 17.35.1.1)
975 mm dia (DSR 17.35.2.1)
10Providing and fixing collar: (DSR 17.57)
11100 mm Sand cast iron S&S as per IS - 1729. (DSR 17.57.1)
1275 mm Sand cast iron S&S as per IS - 1729. (DSR 17.57.2)
13Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: (NSI)
14100 mm dia (NSI)
1575 mm dia (NSI)
16Providing and fixing plain bend of required degree : 100 mm dia Sand cast iron S&S as per IS - 1729 (DSR No. 17.39.1)
17100 mm dia (DSR No. 17.39.1.1)
1875 mm dia (DSR No. 17.39.2.1)
19Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : (DSR No. 17.61)
20100 mm dia (DSR No. 17.61.1)
2175 mm dia (DSR No. 17.61.2)
22Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks (DSR No. 18.76.1)
23Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof (DSR No. 18.77)
24Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS- 1729 (DSR No. 17.60.1.2)
25Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall (DSR No. 18.11)
2615 mm dia nominal bore (DSR No. 18.11.1)
2720 mm dia nominal bore (DSR No. 18.11.2)
2825 mm dia nominal bore (DSR No. 18.11.3)
29Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (DSR No. 18.46)
3015 mm nominal bore (DSR No. 18.46.1)
3120 mm nominal bore (DSR No. 18.46.2)
3225 mm nominal bore (DSR 18.46.3)
33Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore (DSR No. 18.17.1A)
3432 mm nominal bore (DSR No. 18.17.2)
35Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore (DSR 18.18.2)
36Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore. (DSR 18.53.1)
37Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR No. 8.5)
38Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as Directed, within a lead of 50 m All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (DSR 2.10.1.2)
39Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.30.3.1)
40Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.4.1.1)
41Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions (DSR No. 19.19.1.1)
42Providing and fixing grabe rail of stainless steel pipe 1-1/4\\" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge. (NSI)
43Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR No. 17.7.4)
44Extra over & Above Item no 17.7.4 of DSR for using under counter washbasin of size 550x445x190mm as per archtechural drawings, code X0494 or parryware (niagara) model with auto closing piller cock system code G 2013A1 of parry ware (lapis neo) with adjustable brackets ( special for under counter) to entire satisfaction of Engineer-in-charge. (NSI)
45Difference in rate for providing and fixing auto closing systerm code G201 3A1 or Parryware (Lapisneo) instread of ordinary piller cock systerm to be used in handicaped toilet. (NSI)
46Providing and fixing C.P. Bras angular stop cock of 15 mm nominal bore (NSI)
47Providing and fixing white vitreous china ceramic flat back half stall flow sensor urinal wall mounted of size 580x380x350mm with all fitting required, standaed size CP Brass flush pipe,with automatic flushing system speaders, auto closing ahle cock, CP dome waste 32mm, GI waste pipe 32mm, clamps (all CP Bras) including painting of fitting complete in all respect (NSI)
48Providing and fixing CP brass auto closing concealed urinal press matic taps complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)
49Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (DSR No. 17.31)
50Providing and fixing urinal partition 10mm thick High Stainless Steel of size 1.5 x 2.75 fixed in postion with clams holding the Steel Partition All exposed edges to be grinded with smooth finish to the entire satification of engineer-in-charge including carriage of material to site of work. to the entire satification of engineer-in-charge including carriage of material to site of work. [Fixed on slopping back wall before fixing ceramic tiles] (NSI)
51Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR No. 17.22A)
52Providing and fixing of in position best indian make ISI marked 15mm CP brass extionsion nipples including the cost of CP flange complete in all respect as per the entire satisfaction of Engineer in charge (NSI)
53Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No. 17.1.1)
54Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid (DSR No. 17.2.1)
55Providing and fixing to the inlet mouth of rain water pipe cast iron gratting 15cm diameter and weighing not less then 4.40 gram. DSR : 12.44
56Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR 18.48)
57Providing and fixing of water meter cover made out of MS angle frame 25mmx25mm shutter 20mmx20mmx5mm MS sheet 18 gauge with locking arrangement primer painting complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)
58Providing and Fixing C.P. brass bib cock of approved quality conforming IS:8931 (DSR : 18.49)
59Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia (DSR : 17.28.1.1)
60Providing and fixing of automatic hand drier make of approved quality complete in all respect as per the satisfaction of engineer in Charge. (NSI)
61Providing and placing PVC mat 15mm thick (NSI)
62Providing and fixing of dustbin in WC cabins and under wash basinscomplete in all respects. (NSI)
63Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (DSR No. 17.71)
64Providing and fixing Sanitary Napkin Vending Machine, incinator, Battery and happy days pads complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)
65Providing and fixing G.I. tank nipple AVR make. Complete in all respect: 15 mm nominal bore (NSI)
6620 mm nominal bore (NSI)
67Providing and fixing C.P. Extension 1/2'' nipple size Complete in all respect (NSI)
68Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (DSR No. 17.16 A).
69Providing and Fixing Toilet paper holder: (DSR No. 17.34.1)
70Providing and fixing PTMT towel rail complete with brackets fixed to woodencleats with CP brass screws with concealed fittings arrangement of approvedquality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms( DSR. No. 17.73.1)
71Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore (DSR No. 18.21.2.1)
72Providing and Fixing of laminated sign board material for indication of Sign board at toilet block complete in all respect as per the satisfaction of Engineer in charge: (NSI).
7324\\"X24\\" (NSI).
7412\\"X12\\" (NSI).
75Providing and laying Ceramic glazed floor tiles of size 300x300 mm make kajaria, H.R johneons, spenza, cera etc., (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigmentetc., complete. (NSI)
76Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size tile 300mm X 600mm of approved make, in all colours, as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (NSI)
77Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). (DSR No. 14.1.1)
78Providing and fixing 50 watt LED light including cost of wiring, labour and bracket out side on the wall complete in all respects. (NSI)
79Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular swith, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B(DSR No. 1.10.2 E)
80Wiring for light/ power plug with 2X4 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq mm FRLS PVC insulated copper conduct single core cable for loop earthing as required (DSR No. 1.12)
81Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole (DSR No. 2.10.3 E)
82Supplying and fixing metel box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. 200 mm X150 mmX100mm deep (DSR No. 1.22.11)
83U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe (NSI)
8475 mm dia. (NSI)
85110 mm dia (NSI)
86Supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (DSR No. 1.24)
8715/16 a Switch (DSR No. 1.24.3)
883 pin 5/6 A socket outlet (DSR No. 1.24.4)
896 pin 15/16 A socket outlet (DSR No. 1.24.5)
90P/F of 0.75 mm single core PVC insulated copper cable for earthing at Toilet Block (NSI)
91Providing and fixing of Exhaust fan Make: crompton/Havells complete in all respects including the cost of wiring and switches etc. Size 12\\" double ball bearing. (NSI)
92Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (DSR No. 11.56.1)
93Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR No. 13.47.1)
94Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (DSR No. 13.80)
95Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR No. 13.91)
96Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR No. 13.41.1)
97Providing and fixing factory made PVC door frame of Size 75x50 mm of Rajshri plastiwood WPC ( Wood plastic composite) single extruded solid door frame single rebate in plain colour to entire satisfaction of Engineer-in-charge (NSI)
98Providing and fixing factory made 30 mm thick PVC flush door shutters made out of (Rajshree plastiwood pre- laminate (both side decorate) 5mm thick rigid pvc foam sheet, frame shall be made out of 19x19mm MS Square tube of 19 gauge & inside 20mm thick pvc hollow profile filled along tube frame, 5mm rigid PVC foam sheet fixed and pressed machincally on both side of frame with approved quality of adhesive. all the edges of door shutter shall have 5mm thick rigid pvc foam sheet lipping in double layer. item includes powder coated MS butt hinges 100x58x1.9 mm fixed with bright finish or black enamed 40mm / 20mm mild sheet screws as per requirment to entire specifications of Engineer-in-charge. Decorative finish (both side wood grained finish) (NSI)
99Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10 mm( DSR No.9.97.3)
100Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm (DSR No. 9.100.1)
101Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm (DSR No. 9.96.1)
102Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper (DSR No. 9.101.2)
103Less against old material. Old Sanitary Items, Electrical items, Old Civil Items etc. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58558271
AUTHORITY Local Bodies
TENDER VALUE 9.99 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Municipal Corporation
Work Description Tender for Urgent Providing And Fixing Of Public Health Fixtures And Other Allied Works At Toilet Block In Infosys Foundation Red Cross Sarai, Sector 12, Chandigarh. (Ch. To : Revenue Head).Approx. Amount : Rs. 9,99,858/-; Emd : Rs. 19,997/- ; Time Limit : 1 Month.
Basic Detail
Tender No 2026_MCPH1_169
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 23 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 9.99 Lakhs
Tender Fee 1000
EMD 19998
Exemption Not Available
Document List
9cc7d993-4357-49cb-ba6d-7dd22823cb89.html
BOQ_119220.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

9cc7d993-4357-49cb-ba6d-7dd22823cb89.html

xls

BOQ_119220.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender