Tender For Rmc/Amc Of All Hydro Mechanical Components Of Power House Bhep-I For 02 Years
Tender Value
1.35 Crore
Estimated cost
Bid Submission
07 Dec 2026
14 days left
EMD
2.71 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rmc/Amc Of All Hydro Mechanical Components Of Power House Bhep-I For 02 Years
BOQ
| Sl. No. | Item Description |
| 1 | MANPOWER |
| 2 | Supervisor |
| 3 | Fitter (mechanic) Highly Skilled |
| 4 | Technicians (electrician) Highly Skilled |
| 5 | Helper Semi-skilled |
| 6 | Helper Skilled |
| 7 | CONSUMABLES |
| 8 | Cotton cloth |
| 9 | Cotton dhoti |
| 10 | Emery cloth fine |
| 11 | Emery paper coarse |
| 12 | Detergent for cleaning |
| 13 | Hand wash |
| 14 | Hydraulic oil HLP 32 |
| 15 | Gear oil 90grade |
| 16 | Transformer oil |
| 17 | Printer Ink |
| 18 | Measuring tape 30mtr |
| 19 | 3-Socket 6amp, Switch, Top 16 Amp complete board with main mcb 32amp single phase |
| 20 | Floor Wiper |
| 21 | Synthetic Broom |
| 22 | Floor Mop |
| 23 | Halogen tube 1000 watts with essembly |
| 24 | Halogen Tube Fitting |
| 25 | Hand Torch wipro large |
| 26 | Search Light |
| 27 | Insulation Tape |
| 28 | Wire 1sqmm,1.5sq mm, 2.5mm (02 Rolls each) |
| 29 | Colin Spray |
| 30 | 2 core wire 4mm2 |
| 31 | Single core wire 4 mm2 |
| 32 | Heat sleaves (Various sizes 3mm, 4mm, 8mm, 10mm. 10 mtr each) |
| 33 | Cable Ties Various Sizes |
| 34 | Copper wire lugs Various sizes |
| 35 | Socket, Switch, Top 16 Amp |
| 36 | Petrol |
| 37 | Diesel |
| 38 | WD-40 |
| 39 | M seal |
| 40 | Surgical Hand Gloves |
| 41 | Hand gloves for grip |
| 42 | Insulating gloves for 415 V |
| 43 | Rustolene |
| 44 | Cadmium compound |
| 45 | Multipurpose Grease |
| 46 | Welding rod 3.15mm |
| 47 | Welding rod 4.00mm |
| 48 | Welding Rod for Cast iron |
| 49 | Locktite |
| 50 | Welding glass black |
| 51 | Welding glass white |
| 52 | Welding screen |
| 53 | Wire brush |
| 54 | Grinding wheels for Hand grinder AG4 |
| 55 | Cutting Wheels for hand grinder AG4 |
| 56 | Buffing wheels for hand grinder AG4 |
| 57 | wire cup Brush for angle grinder |
| 58 | Cold Welding Paste |
| 59 | Led Bulbs 15 W |
| 60 | Led Light flood type 50W ip66 reputed make |
| 61 | Silica gel |
| 62 | Safety shoes black colour Reputed make – Allan Cooper , liberty etc as per site requirement |
| 63 | Safety Equipment like safety helments ,belts Etc |
| 64 | TOOLS AND TACKLES |
| 65 | Insulated plier (Nose) |
| 66 | Plier (combination) |
| 67 | Chisel 12 inch |
| 68 | Chisel 10 inch |
| 69 | Hammer iron 2Kg |
| 70 | Hammer iron 5 kg |
| 71 | Manifold Gauge set |
| 72 | Soldering iron |
| 73 | Ring and D- spanner set All sizes Reputed make |
| 74 | Electric Drill machine |
| 75 | Drill bit set (Metal + concrete) |
| 76 | Grease Gun with bucket 10kg capacity including All accessories |
| 77 | Cordless impact drill machine with sockets of various sizes |
| 78 | Allen key Set |
| 79 | Angle grinder 4” reputed make |
| 80 | AG 7 reputed make |
| 81 | Chain block 3 ton |
| 82 | Chain block 5 ton |
| 83 | Champion set |
| 84 | potable Single phase welding machine (200–250A) |
| 85 | Digital multimeter reputed make |
| 86 | Clamp - meter reputed make |
| 87 | Screw driver set |
| 88 | Ratchet Socket set (Goti) Light and heavy |
| 89 | Oil testing equipment (for hydraulic & gear oil) |
| 90 | Laptop(HP i5, 8GB RAM,1TB), All in one printer, table for office work |
| 91 | NEW WORKS |
| 92 | Supply & Repairing of cabins Room of gantry cranes DT/TRT includes Door, chair, cabin blower & light, exhaust fan, windows repair work. |
| 93 | Requirement of protection cover of Fibre sheet for Hoist motor & wire rope drum at the top of gantry crane at collection gallery & TRT Crane. |
| 94 | Supply & installation of Distribution panel for the Surge shaft emergency gate panels & control system. |
| 95 | “In addition to the Routine Maintenance Contract (RMC), an Annual Maintenance Contract (AMC) shall be carried out once in a year on complete job basis. The AMC shall include comprehensive servicing, inspection, testing, chemical cleaning, calibration of gantry crane & EOT crane and performance optimization of the entire Hydro mechanical equipment's including hydraulic pumps, hydraulic cylinders, motors, gear box, thrusters, DT gates, TRT gates, power packs, electrical panels and control systems. The AMC shall be executed through a separate job. |
| 96 | UPGRADATION |
| 97 | SITC of replacement main control panel, limit switches 10amp with complete operate of control panel of all control circuit of Gates position up and down, protection system, VFD, long traveller and other allied control .Power supply copper coated cable 415v-3 phase, control supply wire 110vac with olr circuit breakers, repair of cabin room for TRT gate of Gantry crane complete job with all electrical equipment’s & wiring replacement. (New control Panel install) 1. Main panel power supply. 2. Control panel with all protection system 3. Replacement of cabin control panel. Enclosure panel type. Make of panel inclusions -Schneider, ABB, Rita. Cable make : Havels, Polycab |
| 98 | Supply of Drive motor 0.75kw. |
| 99 | SITC of wire cable for gantry crane 4 core copper 35sqmm diameter 50m length. Annexure:-ASITC of wire cable for gantry crane by way of providing 4 core, 35 sq. mm, Copper coated having diameter 8 mm and length 50 m. The job includes replacement of 50 metres Old trailing cable with new flexible trailing cable along with replacement of roller assemblies and accessories like thimbles, nuts& bolts with washer etc.1. Specification of the cable1.1 size of cable shall be 35 sq.mm.1.2 4 Core copper coated1.3 Reputed Make like POLYCAB/HAVELLS or any other superior make.The material shall comply to IS: 3938-1983 (or latest)-Indian Standardspecification for Electric wire rope hoists (SG). |
| 100 | Supply, Installation, Testing and Commissioning of Distance/ Proximity sensors and supply power panel to measure the movement of Lifting beam during the operation of gates.SITC of distance/proximity sensor by way of mounting the sensors on hoist rope drum or on the lifting beam wherever feasible as to measure the exact movement when the lifting beam touches the gate during the operation of DT gates. Installation of HMI, PLC based control panel of reputed company for exact measurement of gate travelling in meters for up & down movement with help of gear boxes and encoder system along with complete wiring on existing system. These sensors to be mounted on the hoist drums/ lifting beam as to accurately show the position of the lifting beams with respect to the gantry crane, the installation is such that it will move in coordination with the rope of the hoist drum. The job also includes the installation of sensors and display size 2feet*4feet in such a position So that underwater distance can also be measured during the up& down movement of DT gates without getting affected by the turbulence /water motion of the water. The distance measured should be displayed on the screen of at least 2ft x 4ft on the both sides of the girders of the crane. The system shall be capable of continuous operation during Varying conditions occurring throughout the year to which a crane is exposed normally in service. The range of climatic conditions 10°C to 5°C throughout the year and with moisture conditions thought the year. Vendor has to submit two copies of connection diagrams of receiver, interface panel/ junction box and crane control panel |
| 101 | SITC of Load Display SystemSITC of complete upgraded microprocessor controlled safety system for TRT GATE GANTRY CRANE i.e. Load Cell. The upgraded system shall be compatible to the existing system fitted on the crane functionally as well as physically. Display unit of about 2ftx2ft is to be installed on the both sides of the girder of gantry crane which continuously shows load while in operations & shall provide indications in case of excessive loads. Load cell shall be attach to the wire ropes and Individual display for both the hooks will be installed on both sides of gantry crane girders and also hooter system shall be installed in case of overload hooter will automatically give the indication. The system shall have a \\"Self-testing feature\\" upon power turn-on and continue to test itself repeatedly and unobtrusively during normal operation and warn the user in advance during the case of malfunction. Further, in case of malfunction. the facility of \\"Error Code Display\\" with adequate information on service manual to trace down a fault of the sensor, Printed circuit board (PCB) and further fault in that unit shall also to be provided. The system shall be capable of continuous operation during varying conditions occurring throughout the year to which a crane is exposed normally in service. The range of climatic conditions l0°C to 5°C throughout the year and with moisture during the rainy season. Specification covers scope of supply of the following items in complete set of or in part with accessories of the upgraded System Central Microprocessor Unit, Control Console, Load Sensor User friendly Display unit LED Suitable for working in day and Nightlight. Vendor has to submit two copies of Connection diagrams of receiver, interface panel/ junction box and crane control panel |
| 102 | Supply. Installation, Testing and Commissioning of Wireless Radio Remote (RRC) control system.The job includes supply and installation of Radio Remote Control system suitable to operate Gantry crane. The scope of supply shall consist of (iv) Radio Remote Control.1 no. Transmitter- Joy sticks type or Push button type 1 no. Receiver.1 no. Antenna and cable.(v) Two sets of Ni-Ah rechargeable batteries. 1 no. Battery Charger (suitable to charge one set of batteries at a time).The remote control Units shall have following features for following motion: (i) MAIN POWER (ii) MAN HOIST (iii) LONG TRAVEL (iv) EMERGENCY STOPON / OFFONE SETONE SETON / OFF CONTROLSITC of Radio Remote Control system suitable to operate Gantry crane by way of Wireless Complete RRC transmitter with battery, receiver, interface panel/ junction box, selector switch, cables for connection between receiver, panel/junction box and crane control panels. Installation and commissioning of RRC system in crane. Installation of RRC receiver, Selector switch and interface panel/ junction box on crane and laying and termination of cable between RRC receiver, interface panel/ junction box and crane control panels. Vendor shall consider lump Sum quantity for length of cable to be supplied for connections |
| 103 | Alignment/Repair of the gantry track and lifting beam with hook adjustment.Alignment/repair of gantry track and lifting beam with hook adjustment by way of removal of old damaged part of track by way of dismantling of old rails and installation of new track wherever required by way of grouting and welding of new track with existing track. The job also includes alignment of new rails wherever required including welding of all rail joints, replacing the damaged clamp bolts, rail joints existing concrete. The alignment of the rails has to be done in accordance with the existing rails and the span, rail levels and alignment rails shall not exceed as per standard tolerances. Packing should be provided where it required and also application of epoxy mortar system of ASTMC-881 on old concrete and laser alignment of complete track.The material shall comply to IS: 800-2007 (or latest) Indian Standardcode of practice for General Construction in steel |
| 104 | Electric Spares for Main Hoist circuit for Draft Tube Gates |
| 105 | Main Hoist Brake, Torque: 35KG-M (3 Phase, 415VAC) |
| 106 | Main Hoist Brake, Torque: 36KG-M (190 VDC) |
| 107 | Hoist Limit Switch (Rotary, 10A) Contact: 1NO+1NC+1NC |
| 108 | Valve Open Limit Switch (Rotary Geared, 10A) Contact: 1NO+1NC |
| 109 | Stator contactor (95A, Triple Pole, 2NO+2NC) Coil Voltage: 110VAC |
| 110 | Control Contactor (9A, 1NC) |
| 111 | O/L Relay (30-50A )with single phasing prevention and Separate Mounting |
| 112 | Push button Yellow |
| 113 | Push button Blue |
| 114 | Push button Green |
| 115 | NO Control Block |
| 116 | NC Control Block |
| 117 | Mushroom Head Type Pushbutton(Red) |
| 118 | HRC Fuse Links(100A) |
| 119 | HRC Lightning Fuse(32A) |
| 120 | HRC Control Fuse(16A) |
| 121 | HRC Fuse Links(10A) |
| 122 | HRC Control Fuse(4A) |
| 123 | HRC Control Fuse(2A) |
| 124 | Fuse Base (125A) |
| 125 | Fuse Base (32A) |
| 126 | ON Delay Timer(0.1-30 Sec.) |
| 127 | Off Delay Timer(Range: 0.1-30 Sec.), Coil Voltage: 110VAC |
| 128 | Indicating Lamp Red(110VAC) |
| 129 | Electric spares-LT Circuit for Draft Tube Gates |
| 130 | LT Brakes, Torque: 9Kg-M (3 Phase, 415 V AC) |
| 131 | LT Limit Switch (Two way lever, 10A) Contact: 2NC |
| 132 | Stator contactor (9A, Triple Pole, 1NC) |
| 133 | O/L Relay (1.4-2.3A,TP ) with single phasing prevention and Separate Mounting Block |
| 134 | Electric Spares for Main Circuit for Draft Tube Gates |
| 135 | TPN Isolator (125A, TP, 415V) |
| 136 | MCCB (100-125A) thermal magnetic type |
| 137 | Indicating Lamps Red(220V) |
| 138 | Indicating Lamps Yellow(220V) |
| 139 | Indicating Lamps Blue(220V) |
| 140 | Control Switch(6A, Two pole On-Off) |
| 141 | Lighting Switch(16A,Two pole On-Off ) |
| 142 | Push Button for STOP(Red, 2NC ) |
| 143 | Push Button for START(Green, 2NO) |
| 144 | Control Transformer(700VA, 415/110V) |
| 145 | Lighting Transformer(415V/240V 3000VA) |
| 146 | Tranformer, 1 Phase Tapping on Sec. (415V/24V, 300VA) |
| 147 | Gravity Limit Switch(10A,230VAC,1NC) |
| 148 | Space Heater(Strip Type, 40W, 230V AC) |
| 149 | Thermostate(30⁰C-90⁰C) |
| 150 | Plug(20A, 230V, 2P+E) |
| 151 | Socket( 20A, 230V AC , 2P+E ) |
| 152 | Toggle Switch(10A, 230V AC) |
| 153 | Circulating Fan(4\\",230V AC) |
| 154 | Exhast Fan(4\\",230V AC) |
| 155 | Cabin Light(40W, 230V AC) |
| 156 | Shunt trip Coil of 110 V AC Shunt TRIP Operating Mechanism. |
| 157 | MCB for Crane Lights(10A, SP, 230V AC) |
| 158 | Girder Lights (50W, 230V AC) |
| 159 | MCB(25A, SP) |
| 160 | MCB(2A, DP) |
| 161 | Variable Frequency Drive 2.2kw upto |
| 162 | Electric spares for Main Hoist Circuit for TRT Gates |
| 163 | Main Hoist Brake, Torque: 20KG-M (3 Phase, 415VAC) |
| 164 | Main Hoist Brake, Torque: 15KG-M(190 VDC) |
| 165 | Hoist Limit Switch(Rotary, 10A) |
| 166 | Mechanical Spares for TRT Gates |
| 167 | EHT Thrustor/Brake 18Kg (415V) Phase3 Amp-40 Type-ST 1.85 Ltr Transformer |
| 168 | Brake of Hoist/Lifting motor EHT 18Kg 415V Phase 3 Amp Type ST-520 Oil Capacity 1.85 ltrs Oil type transformer oil |
| 169 | Limit Switch Two way lever type rating 10 amp |
| 170 | Bottom Seals-20x111x10310 |
| 171 | Side Seals (bottom unit) 160x45bulbx14x2853 |
| 172 | Mechanical spares for Draft tube gates |
| 173 | EHT Thrustor/Brake 18Kg (415V) Phase3 Amp-0.25 Type-ST520 1.85 Ltr |
| 174 | Brake (DCEM Disc for Hoist) Type EHT+DCEM Disc Torque rating 35+36.69kgm |
| 175 | Limit Switch Rotary Geared Gravity Rating 10 amp volts 415 |
| 176 | Limit Switch Type two way lever type Rating 10amp special duty |
| 177 | Terminal Box/Joints-160A |
| 178 | Terminal Box/Joints-50A |
| 179 | Terminal Box/Joints-10A |
| 180 | Terminal Box/Joints-8A |
| 181 | Add on Blocks/ Aux contactorMNX A2 |
| 182 | Top seal , Double stem type-160x45x890complete segment |
| 183 | Side seals double stem type (Top unit)-160x45x2196 complete segment |
| 184 | Corner seals 160x491.5x470 complete segment |
| 185 | Side seals double stem type (Bottom unit)-160x45x2196 complete segment |
| 186 | CSK Bolts-M16X124 |
| 187 | Hex Nut-M16 |
| 188 | Bottom seals wedge type-20x100x9884 complete segment |
| 189 | Repair of 3 phase induction motor 0.75kw |
| 190 | Repair of 3 phase induction motor 7.5kw |
| 191 | Thruster Braking pads with liner of vaious sizes |
| 192 | Miscellaneous charges |
| 193 | Transport Charges and maintenance charges for 02 years |
| 194 | Supply of office/site stationery including log books, registers, A4 papers, files, folders, pens, and printing formats required for maintaining daily, weekly and monthly reports and records, complete in all respects Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender