Tender For Welcome Maintenance To Md Offrs Accn At Dhauladhar Enclave Under Age B/R-I Of Ge (N) Mamun.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Md Offrs Accn At Dhauladhar Enclave Under Age B/R-I Of Ge (N) Mamun.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 in two layers (5mm finishing layer over 10mm base layer) and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately). |
| 4 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling soffits of slabs, chajjas, columns and beams etc in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 5 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 6 | Preparation of old decorated plastered or unplastered surfaces of wall of any type / description such as distempering work, internal emulsion etc from internal surfaces of walls etc with mechanical means / grinder including making even and smooth using plastering / one coat wall care putty to surfaces and applying one coat of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 7 | Preparation of old decorated plastered or unplastered surfaces of wall of any type / description such as distempering work, internal emulsion etc from internal surfaces of walls etc with mechanical means / grinder including making even and smooth using plastering / one coat wall care putty to surfaces and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 8 | Preparation of old plastered or unplastered wall surfaces including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including filling of cracks and small holes with crack filling paste including cornices, pilasters etc. and applying two coats of white wash, complete all as specified and directed. |
| 9 | Preparation of old plastered or unplastered ceiling surfaces including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including filling of cracks and small holes with crack filling paste including cornices, pilasters etc. and applying two coats of white wash, complete all as specified and directed. |
| 10 | Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistance primer for external surface, complete all as specified and directed. |
| 11 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 2mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed. |
| 12 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed. Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 13 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directed. Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 14 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. |
| 15 | Taking down shutter of any description n exc 1 Sqm each and removing from site, complete complete all as specified and directed. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other Frames / Chowkhat of size 65x125mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardantand fixed in position with MS hold fast / lugs /SS dash fasteners of required dia and length (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other Frames / Chowkhat of size 65x100mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardantand fixed in position with MS hold fast / lugs /SS dash fasteners of required dia and length (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 19 | S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided), complete all as specified and directed. |
| 20 | S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws (stainless steel butt hinges and necessary S.S screws shall be paid separately), complete all as specified and directed. |
| 21 | S&F 30mm thick factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face, supplying and fining in frame at site as per specification and drawing |
| 22 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 23 | S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 24 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 25 | S&F 150mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed. |
| 26 | S&F 30mm width of flaps (when open) continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed. |
| 27 | S&F 100mm size Hasp & Staple safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed. |
| 28 | S&F 100mm size stainless steel handle, fancy type, complete all as specified and directed. |
| 29 | S&F in repairs 150mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed. |
| 30 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 31 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 32 | S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks, 1:2:4 type-B0, (using 12.5mm graded crushed stone aggregate) including wire mesh and plain/frosted glass and two coats of synthetic enamel paint over a shop coat of red oxide primer etc. complete all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3, complete all as specified and directed. |
| 33 | M&L for hacking out old broken glass (any thickness, size, quality or description) from frame glazed with putty or fixed with beads / clips, complete all as specified and directed. |
| 34 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / glazing pins in squares not exceeding 0.50 Sqm, complete all as specified and directed. |
| 35 | S&F 3mm thick sheet glass obscured or frosted, on one side glass, ordinary quality and glazing with oil putty / wooden beading / glazing pins in squares not exceeding 0.50 Sqm, complete all as specified and directed. |
| 36 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 37 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 38 | M&L for Glazed ceramic tile 300x600 / 450x300, 07-8mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 39 | M&L for 8 to 10mm thick Vitrified Ceramic tiles, Light shade, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 40 | M&L for 8 to 10mm thick Vitrified Ceramic tiles, Light shade, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed. |
| 41 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 42 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 43 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 44 | S&F 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 45 | Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 46 | S&F 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 47 | Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 49 | S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed. |
| 50 | S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed both ends including necessary fittings such as sockets for pipe or for union, complete all as specified and directed. |
| 51 | S&F in repairs 15mm bore pillar tap, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed. |
| 52 | S&F in repairs 20mm bore ball brass valves high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, complete all as specified and directed. |
| 53 | S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 54 | S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed. |
| 55 | S&F in repairs 15mm bore centre hole basin mixer, cast copper alloy chromium plated with capstan heads, single lever operated, fancy type, for mixing hot & cold water screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 56 | S&F in repairs 32mm dia bore PVC flexible waste pipe, complete all as specified and directed. |
| 57 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. |
| 58 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 59 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. |
| 60 | Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed. |
| 61 | M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays including making joints at every 2.5m and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed. |
| 62 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick PVC / AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 63 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 64 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 65 | M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, finished even and smooth without using extra cement, complete all as specified and directed. |
| 66 | M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 67 | M&L for 20mm thick cement plaster on concrete surfaces in cement mortar 1:4, finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 litre in 50 Kg of cement, complete all as specified and directed. (WPC shall be measured and paid separately) |
| 68 | Supply only Liquid water proofing compound, complete all as specified and directed. |
| 69 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc., complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface.(c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. |
| 70 | S&F 110mm bore PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp including taking down unserviceable existing pipe with fittings, complete all as specified and directed. |
| 71 | S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp including taking down unserviceable existing pipe with fittings, complete all as specified and directed. |
| 72 | S&F in repairs 110mm bore size PVC (SWR) branch piece, single with parallel branches, complete all as specified and directed. |
| 73 | S&F in repairs 75mm bore size PVC (SWR) branch piece, single with parallel branches, complete all as specified and directed. |
| 74 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls with clamps, complete all as specified and directed |
| 75 | S&F in repairs 110mm size PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 76 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. |
| 77 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 78 | M&L for MS TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 79 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including neccessary form work, complete all as specified and directed. |
| 80 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including demolition of existing stone slab and tiles, complete all as specified and directed. |
| 81 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 82 | S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. |
| 83 | S&F in repairs 2nd class hardwood,wrought, small fittings such as brackets of any type,l atch and hinge blocks, shaped door and window stops and the like articles n exc 200 Cucm each, complete all as specified and directed. |
| 84 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 85 | S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore shower rose cast copper alloy, chromium plated with swivel joints, fancy type with with 125mm CP neck, complete all as specified and directed. |
| 87 | S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 750mm x 900mm including fixing to wall and all accessories, complete all as specified and directed. |
| 88 | Dismantling of brick tile, terracing tiles, single layer from roof laid, with bedding layer of mortar etc and removal of rubbish beyond MOD land, complete all as specified and directed. |
| 89 | M&L for plain cement concrete tiles 250mm x 250mm x 20mm thick with grey cement and no pigment machine pressed, set joined and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 90 | S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. |
| 91 | S&F in repairs 18mm thick, factory made, WPC (wood plastic composit boards) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg/cm3 with 100% termite / water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc. as in Kitchen cupboard, Cabinet etc. complete as specified and manufacturer's specification, complete all as specified and directed. |
| 92 | S&F in repairs 18mm thick, factory made, WPC (wood plastic composit boards) sheet both side plain board for cupboard shutter of density 600 kg/cm3 with 100% termite / water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc. as in Kitchen cupboard, Cabinet etc. complete as specified and manufacturer's specification, complete all as specified and directed. |
| 93 | S&F in repairs 5mm thick, factory made, WPC (wood plastic composit boards) sheet one side prelam sheet for Kitchen cabinet / cupboard of density 600 kg/cm3 with 100% termite / water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc. complete as specified and manufacturer's specification, complete all as specified and directed. |
| 94 | S&F in repairs 150mm stainless steel brignt finish handle, including all fitting, complete all as specified and directed. |
| 95 | S&F in repairs stainless steel telescopic side channels of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised (soft close ball bearing runners) with width of flap 30mm and 60mm long, complete all as specified and directed. |
| 96 | S&F in repairs stainless steel plain basket of size 17''x20''x6'', complete all as specified and directed. |
| 97 | S&F in repairs Stainless steel partition of size 17''x20''x6'', complete all as specified and directed. |
| 98 | S&F in repairs Stainless steel cutlery of size 17''x20''x6'', complete all as specified and directed. |
| 99 | S&F in repairs Stainless steel cup & soucer of size 17''x20''x4'', complete all as specified and directed. |
| 100 | S&F in repairs Stainless steel plate basket of size 17''x20''x6'', complete all as specified and directed. |
| 101 | S&F stainless steel auto, zero crank hinges, fancy type with concealed pattern fitted to shutters, complete all as specified and directed. |
| 102 | S&F Magic catcher for shutter fitted with suitable screws, complete all as specified and directed. |
| 103 | S&F in repairs CP Health faucet fixed with spring action and lever along with 8mm bore stainless steel flexible hose with nut of length 1.2m fitted in the existing water connection in the toilets, complete all as specified and directed. |
| 104 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 64,900.00 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender