Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58557914

Tender For Providing Of Certain E/M Minor Works At Af Stn Bareilly Under Ge (Af) Bareilly

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
13.87 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
27740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of Certain E/M Minor Works At Af Stn Bareilly Under Ge (Af) Bareilly

BOQ

Name of Work:- Provn of certain E/M Minor works at AF Stn Bareilly under GE (AF) Bareilly
Sl. No. Item Description
1Excavation in trenches not exceeding 1.5 mtr wide & not exceeding 1.5 mtr deep for laying pipe lines,cables etc and getting out in soft /loose soil including forming surface to required level all as specified.
2Returning,filling in trenches ( soil) in layers not exceeding 25 cm thick including spreading, levelling, well ramming and watering as required all as specified.
3Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point all as specified.
4S&F for 25 mm bore galvanised iron tubing, medium grade with all fittings and laid in trench or fixed on wall /floor all as specified.
5S&F for 20 mm bore galvanised iron tubing, medium grade with all fittings and laid in trench or fixed on wall /floor all as specified.
6S&F for 25mm dia gun metal gate valve, Class-I, 1.5 Mpa with ISI marked and iron wheel head, screwed both ends to GI pipes all as specified .
7S&F for 20mm dia gun metal gate valve, Class-I, 1.5 Mpa with ISI marked and iron wheel head, screwed both ends to GI pipes all as specified .
8Supply, commissioning and testing of addressable fire alarm control panel (2 loop DC) , microprocessor based, LCD display complete with mounting battery of suitable capacity all as specified.
9Supply, commissioning and testing of analogue addressable Manual Call point ESP analogue addressable protocol having status LED for alarming and standby mode, electronically addressed, resettable type duly approved by LPCB complete all as specified.
10Supply, commissioning and testing of analogue addressable loop powered wall sounder with flasher providing multi volume levels and multi tones with a maximum output up to 102 dB(A) with low current consumption, fitted on isolator type base which is fully compatible with ESP analogue addressable protocol, user selectable modes, electronically addressed duly approved by LPCB complete all as specified.
11Supply, commissioning and testing of addressable smoke detector with base complete all as specified .
12Supply, commissioning and testing of addressable heat detector mounting wall /roof /ceiling complete all as specified.
13S&F for submain wiring with two run of 1.5 Sqmm 2 core FRLS multi-stranded armoured copper conductor cable for fire detectors with all accessories and cable pointers duly painted with FIRE RED tags at an interval of every one metre all as specified.
14M&L for rigid metalic conduit including of all tees, bends, elbow, redducer, bellmouth tube ends and fixing accessories such as couplers, locks nuts, saddles, pipe hooks etc of size 25 mm all as specified.
15M&L for earthing with copper plate electrode 600mm x 600mm x 3.15 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level and connected to & including copper strip 20mmx3 mm by means of nuts and bolt check nuts and washers of galvanised iron sheet, passing through protection pipe of 25 mm dia light grade GI pipe all as shown in electrical plate Nos 3 of SSR Part-I and connected to earthing test point inclduing testing, filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs apart and PCC 1:3:6 type C-1 in chamber with precast RCC cover 40mm thick reinforced with 8 mm dia TMT bar 3 Nos both way with handle made out of 20 mm dia MS bar, water pipe 15mm dia light grade with wire mesh, funnel and connecting testing all as specified.
16M&L for test point terminal block made of gun metal or phosphorus bronze of size 75mmx75mmx25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screws for holding the bronze plate including fastening/ bolting the roof down conductor and earth electrode over the bronze plate with copper bolts & nuts of suitable size, providing 10mm thick fibre sheet of size 15cmx15cm below the test point to avoid direct contact with wall including enclosing the test point with 1.6mm thick MS sheet front openable box duly painted complete all as specified.
17M&L for aluminium strip of size 25mmx3mm as in earth continuity conductor or main earthing lead burries in ground, fixed to wall or any other indicated situation for loop earthing and the like up to test point on necessary insulators and fastening screws, rawl plugs complete all as specified.
18M&L for single pointed air termination aluminum rod of 12 mm dia and 300 mm long including 20 mm size air terminal base / ridge saddle made of gun metal with and including fixing with PCC arrangment on the ridge of RCC roof / on pole as required all as specified.
19M&L for construction of new earth pit chamber of size 30cmx30cmx30cm with cement concrete 1:2:4 , type B-1 using 20mm graded stone aggregate including cast iron frame with hinged pit MS sheet cover of size 300mmx300mm x3.15mm and all as per Electrical plate No.3 as specified.
20Supply, laying and testing LT XLPE cable insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specifeid.
21M&L for sand cushioning for UG cables using dry river sand with gently punning down all as specified. Note : measurement purpose punned thickness shall be considered.
22M&L for Sub class 'B' brick for covering under ground cable laid flat transversally width equal to the lenth of the cable all as specified.
23Design, Supply, installation, testing and commissioning of outdoor type LT feeder pillar panel overall depth not less than 450mm, mild steel channel base frame mounted on the 3 side covered brick. pedestal of height 450 mm above ground level, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 400 Amps insulated, provision of spreader link to both incoming and outgoing side of MCCBs for termination of cables. LT panel shall be fabricated by an approved fabrication house having modern fabrication and testing facility which includes at least seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 micron) with approved shade of RAL 7032 (SIEMENS GRAY). Incoming :- (i) Isolator having current rating 63 Amp , 4 Pole of breaking capacity 25 KA, 415 volts -01 No. (ii) Volt meter 0-500 volts,Square flush pattern,digital type -01 No. (iii) Amp meter square flush pattern 0-600 Amps digital type-01 (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marked . Outgoing :- (i) Isolator having current rating 32 Amp, 4 pole of breaking capacity 25 KA, 415 volts -03 Nos.
24M&L for earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth strip of 32mmX6mm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C-1 in chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in type B-1 including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of SSR Part-I and connected to earthing test point all as specified.
25M&L for horizontal boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 50 mm bore and making good the disturbed surface all as specified.Note: GI pipe will be measured and paid separately.
26S&F for 50 mm bore GI tube, light grade with all fittings and laid in trenches or inserting in horizontal boring complete all as specified.
27Supply, installation , testing and commissiong of factory made LT panel outdoor type platform mounted of size 1800 mm x 1200 mm x 450 mm suitable for 415 volts 3 phase 4 wire system 50Hz supply having aluminum bus bar 600 amps for phases and neutral, installed on porcelain / epoxy insulator. the panel shall be dust proof, vermin proof (IP54) and applying spray paintig with two coats of synthetic enameled paint over a coat of red oxide primer on sheet and made of out of 3.15 mm thick CRCA sheet self moulded type and 50mmx50mmx6 mm angle iron frame front and rear opening with double shutter and locking arranement with 50mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified. The scope of work includes provision of housing the following acceessories:- Incoming:- (i) MCCB 160 Amp,4 pole of breaking capacity 36 KA -01 No. (ii) Volt meter 0-500 volts square flush pattern,digital type -01 No. (iii) Amp meter square flush pattern 0-600 Amps digital type-01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marked . (vi) Alarm System for indicate the commercial power failure. Outgoing : - (i) MCCB 100 Amp, 4 pole of breaking capacity 25 KA,415 volts -01 No. (iii) MCCB 63Amp, 4 pole of breaking capacity 25 KA, 415 volts -02 Nos. Please Enable Macros to View BoQ information
28Supply, installation , testing and commissiong of factory made LT panel outdoor type platform mounted of size 1800 mm x 1200 mm x 450 mm suitable for 415 volts 3 phase 4 wire system 50Hz supply having aluminum bus bar 600 amps for phases and neutral, installed on porcelain / epoxy insulator. the panel shall be dust proof, vermin proof (IP54) and applying spray paintig with two coats of synthetic enameled paint over a coat of red oxide primer on sheet and made of out of 3.15 mm thick CRCA sheet self moulded type and 50mmx50mmx6 mm angle iron frame front and rear opening with double shutter and locking arranement with 50mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified. The scope of work includes provision of housing the following acceessories:- Incoming:- (i) MCCB 160 Amp,4 pole of breaking capacity 36 KA -01 No. (ii) Volt meter 0-500 volts square flush pattern,digital type -01 No. (iii) Amp meter square flush pattern 0-600 Amps digital type-01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marked . (vi) Alarm System for indicate the commercial power failure. Outgoing : - (i) MCCB 100 Amp, 4 pole of breaking capacity 25 KA,415 volts -01 No. (iii) MCCB 63Amp, 4 pole of breaking capacity 25 KA, 415 volts -02 Nos. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557914
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 13.87 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Certain E/M Minor Works At Af Stn Bareilly Under Ge (Af) Bareilly
Basic Detail
Tender No GE(AF)/BLY/T-53 of 2026-27
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 13.87 Lakhs
Tender Fee 500
EMD 27740
Exemption Available
Document List
acb9b202-51dd-4a2e-aa25-4f05837ffd2a.html
BOQ_896227.xls
TENDER53.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

acb9b202-51dd-4a2e-aa25-4f05837ffd2a.html

xls

BOQ_896227.xls

pdf

TENDER53.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender