Tender For Development And Beautification Work Of The Statue Of Dr. Bhimrao Ambedkar/Maharishi Valmiki Statue In Gram Panchayat- Sultanpur Hatana Block - Baghpat
Tender Value
8.44 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
8500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baghpat → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development And Beautification Work Of The Statue Of Dr. Bhimrao Ambedkar/Maharishi Valmiki Statue In Gram Panchayat- Sultanpur Hatana Block - Baghpat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR no. 2.8.1 All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR no. 4.1.8 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R No. 6.1.1 |
| 4 | Centering and shuttering including stutting, propping etc. and removal of form. Foundation as per DSR SI No- 5.9.1 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)- All work up to plinth level : D.S.R.No. 5.1.2 |
| 6 | Centering and shuttering including stutting, propping etc. and removal of form. Columns, pillars as per DSR SI No - 5.9.6 |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : D.S.R.No. 5.2.2 |
| 8 | Steel reinforcement for RCC work including straightening , cutting ,bending, placing in position and binding all complete. Dsr no 5.22.3 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R.No. 6.4.1 |
| 10 | Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8 mm thick (mirror polished and machine cut edge) Grenite stone of any colour and shade D.S.R.No. 7.38.1.1 |
| 11 | P/L vitrified floor tile laid on 20mm thick cement mortar(1:4) as DSR No. 11.41 & 11.41A |
| 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. D.S.R.No. 10.2 |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). D.S.R.No. 10.28 |
| 14 | 12 mm cement plaster of mix CEMENT PLASTER (IN COARSE SAND) 1:6 (1 cement: 6 coarse sand) |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.. D.S.R.No. 13.80 |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) D.S.R.No.13.46.1 |
| 17 | Painting with synthetic enamel paint of approved brand & manufacture of required colour to give even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacture as per DSR no. 13.62.1 |
| 18 | Construction of granular sub base by providing well graded material spreading in uniform layers with Tractor mount grader on prepared surface mixing by mix in place method Tractor with rotavator at OMC,and compacting with Three wheel 80-100 KN Static Roller to achieve the desire density,complete as per technical specification clause 401. By Manual Means |
| 19 | Providing and Laying of M-30 Gray colour Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 20 | Supply of water proof painted Precast R.C.C. bench having sitting flat bench length 1.50 mtr, bench width 0.40 mtr, 50 mm thick, bench front total height 0.45 mtr, back support length 1.50 mtr, width of flat back support 0.35 mtr, 50 mm thick, total back height of bench 0.95 mtr, supported on two sides similar moulded approved design and shape R.C.C. legs having section 100mm x100 mm, fitted with nut-bolt. Using M-30 grade of Concrete and by using vibro compaction process. (AS PER APPROVED DESIGN AND SHAPE). Complete with all material and labour as per EIC. |
| 21 | Supply & Fixing of Informatory Sign board at site including letter, writing, painting etc all comp at site. |
| 22 | Supply & Fixing of 10 mtr. G.I. Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm & base plate 16 mm thick) having of 3mm thikness with double arm bracket, length of 1mtr. 1 length in 1:2:4 RCC foundation bolt including the cost of foundation, ezcavation & back filling and Required T&P......... complete in all respect. (Sch.No. PWD NEW 2024 CHAPTER -21.2.9) |
| 23 | Supply & Fixing of Hexagonal frame of 6 No. LED T Lamp with NC 2 lacquer acrylic lacquer and 2k PU painting and fitting.... complete in all respect. (Market Rate) |
| 24 | Supply & Laying of Aluminium Conductor PVC Insulated Armoured served sheathed cables 110 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks 10sqmm 2 core cable. complete in all respect. (Sch No. PWD NEW 2024 CHAPTER-20a. 1.2) |
| 25 | upplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars/Lighting DBs for Automatic switching On & Off of street lights at sun set & sun rise or twilight (Auto On, Auto Off, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. (2 outpit per phase and suitable for single phase supply) (DSR-15.4.2 |
| 26 | S/F of factory wired integral LED Flood Light 170-200 watt fitting 5 single PC, pressure die cast and extruded aluminium housing complete IP in all respect. (CAT-AAA) PWD NEW (Sch. No. 23.26) |
| 27 | Supply and Burrying of 75mm dia 1mtrs. Long electrode casted with maintenan free, conductive concrete, non corrosive mixture (ultra low risistive carbon 0.001ohm/m) in the ratio of 3:1:1 normal soil will be used as backfill material. (PWD 2018 Sch. No-729A) |
| 28 | S/F of Sign Board with lettering & numbering on pole with Photography each Pole (Merket Rate) |
| 29 | Supply & Drawing following sizes of FRLS PVR insulated copper 8 conductor, sinle core cable 2X6sqmm........ Complete in all respect DSR-1.17.29 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender