Tender For Augmentation Of Water Supply At Eklavya Model Residential School, Mathili (At Mendukuli)
Tender Value
27.13 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
12 days left
EMD
27133
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malkangiri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Water Supply At Eklavya Model Residential School, Mathili (At Mendukuli)
BOQ
| Sl. No. | Item Description |
| 1 | Augmentation of Water Supply at Eklavya Model Residential School, Mathili (at Mendukuli) |
| 2 | Construction of 200 KL UGR: Design, drawing, construction errection, testing and commissioning of 200KL capacity RCC Under Ground storage reservoir (Circular type with speherical top dome) and as per detailed scope of the work & technical specification mentioned the Engineer, including testing of soil etc., transportation of all materials to work site, payment of royalty, etc. all complete as per specification and direction of Engineer-in-charge. |
| 3 | Head works: Supply, transportation, loading, unloading of 3Phase bore vertical submerssible 5HP motor . ( for Production well ) |
| 4 | Control panel suitable for above pump for Three phase supply run having voltmeter, ammeter, indicator lamp, on/ off switch, eletronic timer with locking arrangement. |
| 5 | Supply, fitting & fixing of 4mm2 ISI marked PVC insulated three Core Flat Copper Cables as per lS-694/2010 |
| 6 | Supply, fitting & fixing of 6mm2 PVC coated Steel Wire Rope |
| 7 | Supplying all labour, T&P and fitting and lowering of Submersible pump set with required Column pipe/HDPE pipe, submersible cable, wire rope including testing and jointing to the water mains, necessary nuts and bolts, rubber insertion, FTA/MTA, transportation of all materials to work site etc. all complete as per the direction of EIC. |
| 8 | Supply, fitting & fixing of 80mm dia ISI marked GI Column pipe 3.00 m long |
| 9 | Supply, fitting & fixing of 63mm dia HDPE pipe of PE 80 PN 8 medium gauge |
| 10 | Supply, fitting & fixing of 50mm dia G.I.union |
| 11 | Supply, fitting & fixing of 50mm dia G.I.union |
| 12 | Supply, fitting & fixing of 50M.S. pipe clamp set with nuts and bolts |
| 13 | Supply, fitting & fixing of 50mm dia G.I. Bend |
| 14 | Supply, fitting & fixing of 50mm dia G.I. Elbow |
| 15 | Supply, fitting & fixing of 50mm dia G.I. socket |
| 16 | Supply, fitting & fixing of 50mmx5ft long G.I. short piece |
| 17 | Supply, fitting & fixing of 50mmx1 ft long G.I. short piece |
| 18 | Supply, fitting & fixing of 50mm x 80mm G.I. R.Socket |
| 19 | Supply, fitting & fixing of U- Clamp for Wire Rope. |
| 20 | Supply, fitting & fixing of Brass Pressure Gauge of 10kgf/sec pressure |
| 21 | Supply, fitting & fixing of Z type bend minimum length of 6.00 mtr |
| 22 | Supply, fitting & fixing of 200mm dia GI febricated production well Cover |
| 23 | Earth work excavation in hard soil in trenches for laying of HDPE pipe for cable laying. |
| 24 | Supply, fitting & fixing of 32mm dia HDPE Pipe for laying of submersible flat cable. |
| 25 | Re-filling the trenches with excavated earth. Qnty. Same as excavation |
| 26 | Supplying fitting and fixing of Chain pully with stand comprising 100 mm dia GI pipe with all cost. |
| 27 | Internal Electrification of Pump House: Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard) Group-B (Medium light Point) |
| 28 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard) Group-C (Long light Point) |
| 29 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. Angle Holder |
| 30 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. 3 pin 5 / 6 amp socket outlet with Switch |
| 31 | Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings). 6 pin 15 / 16 amp socket outlet with Switch |
| 32 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 33 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/ Havels/ V Guard) |
| 34 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 35 | Supply & laying of 25mm x 5mm G.I strip on surface or in recess for connection etc. as required |
| 36 | Installation, Testing and Commissioning of pre-wired 20 watt LED Tube light fitting complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 37 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required |
| 38 | Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. |
| 39 | Supply & fixing of 15 watt LED Bulb (Havells/ Crompton/ Bajaj or equivalent). |
| 40 | Supply & fixing of 45 watt Street light (Philips/ Havells/ Crompton/ Bajaj or equivalent). |
| 41 | Supply & fitting of phase indicator lamp (Red Yellow Blue) withtoggle switch and fuse with all connections. |
| 42 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR). 4 WAY, SINGLE DOOR |
| 43 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (for motor) |
| 44 | Supply of minimum safety equipments such as Rubber Mat - 2 Nos. of size 0.60mtr x 0.90mtr, standard Hand Gloves - 2 pair (ISI marked) and fixing of danger Board etc |
| 45 | Supply & fixing of 25 sqmm, 3.5 core Aluminum Armoured Cable. |
| 46 | Development of around Bore site: Earth work in excavation of fondation in hard soil with all lead and lift including dressing and levelling the bed to receive foundation concrete etc complete in all respect. |
| 47 | Providing sand filling in foundation & plinth |
| 48 | Providing Cement Concrete (1:3:6) using 40mm size HBG Metal |
| 49 | Providing Cement concrete (1:2:4) using 12mm size CBG chips inclduing all cost. |
| 50 | WBCB Brick Masonry in Cement Mortar (1:6) in Foundation & Plinth |
| 51 | 12mm thick Cement Plaster (1:3) over the Brick work including all cost |
| 52 | Providing neat Cement Punning over the plastered surface including all cost |
| 53 | RCC work in Cement concrete (1:1.5:3) using 12mm size CBG chips inclduing all cost. |
| 54 | Providing uncoated steel reinforcement to RCC work including all cost |
| 55 | Distibution system and Commissioning: Supplying all labour, T&P for earth work excavation in trenches for 110mm dia HDPE pipeline in all kinds of soil including dressing and levelling the bed and depositing the soil within 50Mtr initial lead and 1.5Mtr lift etc. complete as per direction of the Engineer-in-Charge. |
| 56 | Supplying, transportation & Laying of 110mm HDPE pipes (PN-6) PE80 and specials of the following outer dia and Class-1 to Class-3 and jointing by fusion welding method including testing as per specification, complete as per direction by the Engineer in Charge. |
| 57 | Cost of Fittings & Specials etc. for HDPE Pipe (to be paid as per actuals) |
| 58 | Supplying all labour & T&P for filling of pipeline trenches with excavated materials including watering, ramming etc. complete as per direction of the Engineer in Charge. |
| 59 | Providing & supplying all labour, materials & T&P for construction of Brick masonry Valve chamber incluidng 10cm C.C. 1:4:8 using 40mm H.G. meal, 0.08cm thick Pre cast R.C.C. Slab 1:11/2:3 using 12mm CBG chips, and 23 cm thick brick masonry Wall, plastering etc. complete in all respect with supply of materials including all taxes. |
| 60 | Supplying, fitting & fixing of 100mm dia C.I Sluice valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 56.30 kg) |
| 61 | Supplying, fitting & fixing of 80mm dia C.I Sluice valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 37.30 kg) |
| 62 | Supplying, fitting & fixing of 100mm dia C.I. Non-Return Valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 56.30 kg) |
| 63 | Supplying, fitting & fixing of 80mm dia C.I. Non-Return Valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 37.30 kg) |
| 64 | Providing & supplying all labour and materials & T&P & construction of 45cm x 45cm x1.45m size RCC shaft Air valve chamber incluidng 10cm C.C. 1:4:8 using 40mm H.G. meal, 0.08cm thick Pre cast R.C.C. Slab 1:11/2:3 using 12mm CBG chips, 0.05mm thick C.C. 1:2:4 on bed and 15cm thick RCC wall etc. complete in all respect. (Detailed estimate is at annexure-K) |
| 65 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debrish within 50m lead. |
| 66 | Supplying all labour, material and T.&P. etc C.C. 1:4:8 using 40mm size CBG chips for making good the damage for laying of difference size of pipe line all complete as per the direction of Engineer in charge. |
| 67 | Supplying all labour, material and T.&P. etc C.C. 1:2:4 using 12mm size CBG chips for making good the damage for laying of difference size of pipe line all complete as per the direction of Engineer in charge. |
| 68 | Supply, transportation, loading, Submersible Pump set3 Phase 5 HP, stage - 3Head - 21 mtr (10-30mtr)Discharge - 726 LPM (1005-383 LPM) unloading of Horizontal submerssible motor. ( Sump) |
| 69 | Star Delta Control Panel with APFC arrangement suitable for above pump single phase run having voltmeter, ammeter, indicator lamp, on/ off switch, eletronic timer with locking arrangement. N.B: The amount put to tender is exclusive of GST. The intending bidders should offer their rate which shall be exclusive of GST as per norms. GST applicable onwards contract shall be paid over the bill amount at the time of payment of each bill. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender